DO NOT anchor your jet ski the wrong way!

Just like anchoring a boat, the anchor, chain, and rope should be at the bow of your jet ski. Not something that I have invented, but the way I have adopted and works for me.
Very important in doing this way is that I do not need to get myself wet. Means I do not need to risk myself jumping into the water in the case of strong current to secure the anchor properly.
A few things to note for myself:
1. When preparing the anchor, I need to lock the grapple with the catch. Else I may risk having them closed up and not able to grab to the sea bed.
2. Need to have a faster way to remove the carabiner from the side. I will likely tie a rope to the side to crease a small loop. Then hook the carabiner to the loop.

[@myunghong9004]

Good video. Im just worried you will loose your anchor and rope. I suggest reconnect your chains at the bottom and cable tie to the top. Be safe.

[@anthonyeconomides1722]

No good struggle to undone clip and put on as well and can see you lose a bit of balance.Use proper one what i have is come with elastic that go over the mirror ,much quicker to undone and put over it

[@chefgarrin]

Generally when we anchor a seadoo it's to go ashore 99% of the time... You're going to get wet.....

[@ExplorerPWC]

Great tips Harley PWC! (Although I wish Sea Doo made that cleat a bit bigger as the carabiner is sometimes hard to clip on and off.). So are you loving the Explorer Pro as much as we are??