Do Screw Extractors From Wish Really Work?

[@spicydragon3881]

Okay, I'm officially convinced that this is 100% an act, a character for KZbin or you were never a diesel mechanic. Its like being a surgeon but having no idea how to walk into a hospital

[@coreystock4182]

It's probably why he use to be one they had to cut him loose clearly😂

[@littledebbie5254]

I love u Tyler proud of u for taking a leap into KZbin and leaving ur days as a diesel mechanic

[@SadPuppySoup]

I love how cheap bits are called titanium and colored to match but are really made of common everyday slag (slag the waste from molted metal)

[@Sorgris]

Aka chinesium

[@tyler755]

I'm almost in disbelief that you were ever a mechanic LOL

[@Pwills]

To be fair he never said he was a good mechanic 😂🤣😂

[@michaeljames6434]

Yer I no what mean lol

[@liloreoinya]

I refuse to believe this is not just a character he's playing.

[@tyler755]

@@Pwills there's a reason he's making these videos lol

[@tyler755]

@@liloreoinya I think half of it is honest and the rest is hamming it up. He's the same dude on his streams

[@88clemoine]

I have similar bits that work great when you use them properly. You drill out the screw in forward. Flip the bit around then use the extractor in reverse. One time you should have read the instructions. 🎉🎉✌️😎

[@stevenstephens8815]

Pressure at start is vital in this situation.

[@julieboruta]

Please redo this video properly @TylorTube Too

[@makl196]

Never used these things, but I was thinking the same. Please redo the test @TylerTubeToo Edit: Actually I was wrong Tyler used it correctly

[@jefa3524]

This is his 3rd time fucking these up. People have yelled and screamed in comments to use it correctly and nothing changes. Don’t hold your breath folks.

[@MrNobody91]

The sad thing is this isn’t the first time he’s done this wrong.

[@kimjongun1]

I've always had the best luck with use a dremel or rotary tool to turn the stripped phillips screw into a flathead screw and simply removing with a flathead drillbit or flathead screwdriver. Easy, effective, no unnecessary purchases

[@timsawyer9231]

Everyone sitting in the comments talking crap to Tyler about using them "correctly" and reverse/forward blah blah blah... He's using them 100% correctly, they just suck. You can even see the cutting edge on the drill bits spinning the correct direction in the video. Dude knows how to use a damn extractor set. If I had to guess, the bulk of people in the comments talking crap are probably only equipped to hang a picture. I saw one comment of a guy saying something about it working better in a drill press?! Come on... I've been working with my hands and tools, 8 hours a day, 5 days a week for many years. Commercial contracting, which more or less means I drive from store to store fixing all the crap people break, so I'm always doing something different. I find myself needing to extract screws/bolts on a regular basis.. I can say from a LOT of experience, these Easy-Out style extractors suck ass. I wish they were good, because it's a nice compact bit of kit and when you have to carry a toolbox everywhere, you like to keep it light.. But they just aren't any good. Even if you drill out the hole with a red helix, the extractor still just slips and chews it up more.. I'm a little salty about it....

[@prometheus5465]

Super late but I agree, I wish people weren’t so hard on him, he’s just trying to hang out and do his own thing and these people are so horribly mean to him but then claim to be a fan

[@itssummertime6854]

This has been my exact experience with these. Now if you spend $10 more on a real set of extractors they will serve you for many years with no issue.

[@ndlsjk]

The HSS 4130 is just the alloy of steel: 4130 High Strength Steel. It's a standard material for cutting tools such as drills and end mills although you see more and more carbide as time goes on.

[@Braxel_]

Those look like ones i bought once from a store and they were cheap and useless, the material was just weak and any edge that could bite or drill into a screw just shaved off instantly. tried to use them on stripped hex screws, but what actually worked was tapping in a slightly bigger torx bit.

[@TopGoose-bf1mx]

RIP the cricket that was absolutely silenced by public execution @0:16... F in the chat.

[@bradasstv]

A lot of times I will just take a flat head bit and usually get stripped screws out that way 🤷‍♂️

[@Wolfnap313]

Thanks!

[@andrewduncan6587]

I think it's called wish because everyone says "I wish I bought the real product". Soft cheap metal can't compete with the hardened steel of a decent screw

[@ndlsjk]

He said they're stamped HSS 4130 which is a standard grade of steel for cutting tools, it's not bad. If you have decent drills in your garage the shank will be stamped HSS and will likely be 4130 or a similar alloy. Cheap drills and taps will be carbon steel and I am unsure of the stamps for that - I own a machine shop and stay far away from carbon steel tools. Of course, these could be made from anything and just stamped HSS, but that is a whole nother can of worms.

[@ram89572]

@@ndlsjkThis stuff is from Wish. It is cheap chinesium crap that is either a total scam by not being made with the materials it is claimed to be or is something that could have been legitimate but came off of the reject line for one reason or another that they then sell to you while collecting as much data on you as they can so they can try to steal from you later through some other means, be it fraud calls or just straight up card number theft

[@Semb638]

liking the video when the ads before the video it’s self are playing >>

[@StreakedSilver]

"I think I've already tested this" Cricket "BOOOOOORIIIIING!"

[@ManiacSkateboarding]

Apparently this is a former diesel mechanic😂 never met a mechanic that drove a Toyota either😭 Love the videos homie!

[@green7449]

Pretty sure Scotty Kilmer drive a Toyota and he was a mechanic for decades. 😂

[@jdizzforyou]

I have video ideas! You have Wish, Temu, how about youtube ad products? That sounds fun😂

[@ChefBoiImHungry]

drill it out forward then back out in reverse....it even works with cheap HARBOR FREIGHT bits!

[@seraphimvalkyrin4543]

Not how these ones work though. The website itself shows that both side work in the same direction. This is just an error in manufacturing, not of misuse.

[@ChefBoiImHungry]

@@seraphimvalkyrin4543 best thing is dont waste pennies on junk lol

[@quintonkoepnick]

LMAO! You can put your good extractors in your drill chuck too.

[@XVIIsionsProductions]

Sir… I do believe the drill side is actually right handed… Logically speaking, there’s no metal shavings from “drilling”, it sounds like it’s just gliding across the metal, and it looks like the flutes of the drill side are facing the normal direction. ALSO, logically speaking, you wouldn’t want the strips screw to loosen while drilling, you want to drill into it while it’s tightening to ensure proper depth for the extractor to grab… And like my dad always says; if it looks like shit, smells like shit, and tastes like shit, it’s probably shit. Reverse the drill, right handed like normal for drilling, then swap the bit to the extractor and put it in reverse, left… lol

[@a1gambles791]

The two drill bits you showed us at 1:20 are not the same?

[@wesleystace9962]

Anyone who's ever used an easy out knows you have to drill a hole and then use your easy out I know they claim that it can unscrew a bad screw but it don't

[@louishoey]

Right tool for the job grabs a wrench instead of a socket 😂.

[@dubrpanda1636]

Tyler what made you get a 2nd channel??

[@2000evan]

Soon as I see the notification I click it, we love when you upload Tyler 🎉

[@Sytharis]

It has to be satire, the fact that you're using the extractor end to "drill" lol.

[@danemclaurin6690]

Yeah, maybe a mechanic at Jiffy Lube

[@brandonross4521]

We need proof of being a mechanic, we the people don’t believe

[@zacc.attacc]

So are we gonna get temu Tuesday now to go with wish Wednesday?

[@extrasublime]

the main problem with the cheap ones is the drill bit part. better off using regular drill bits and come back with the extractor part.

[@ChandlerBrady-e1u]

I would like to see a test of the drill bits and grinder disk from bad dog tools

[@MrNobody91]

He’s done that

[@justbear6165]

The drill bit end works better if you use it in forward.

[@user-mgc]

The extractors might have worked if they'd been used correctly...

[@yehudadeutsch6884]

How are you supposed to use them 😅

[@vivian_music]

Drilling a hole into it with a drill bit to get it down further @@yehudadeutsch6884

[@JustinGrosz]

Drill bit side is forward. Extractor side is reverse.

[@ProfessionalByNoMeans]

@@JustinGrosz came to say same...

[@TylerTube]

these drill bits are backwards@@JustinGrosz

[@ryleelevick]

petition for temu tuesdays ‼️‼️ I love these

[@lukestock6525]

Seriously Love this Dude, so down to earth and Shows US what WE want to See even through WE dont know it❤

[@benreagan1]

Hey Tyler, since you do a "Wish Wednesday", how about starting a "Temu Tuesday"?

[@medic-iw6qx]

Me watching Tyler use the drill outs the wrong way round for the third time 🤦‍♂️

[@yyycma3]

The high speed of the drill is destroying the walls of the hole.

[@Tricshotz-]

Love your videos, Tyler

[@ryanallen3704]

You're meant tonhave the drill in forward when drilling them out, when you flip the bit to the extractor you put the drill in reverse...

[@marsocrunner]

I love your videos but this has to be satire at this point dawg haha sometimes I'm stumped wondering what kind of mechanic you could have been 😅

[@ProfessionalByNoMeans]

I think it gets the comments going and gets the views up...

[@adamhalcyon3393]

I think he's serious. Pretty sure he is.

[@FlyboyHelosim]

@@adamhalcyon3393 That profile picture is the stuff of nightmares.

[@bwc1976]

I think I've seen him wear a Waste Management hat or shirt before, and I know he's mentioned working on garbage trucks.

[@gigikoro8790]

can you use the screw extractors from bunnings warehouse

[@shantel4815]

Hi Tyler! Found u recently..so glad!!

[@fwir711u2]

Pretty sure you're supposed to run those extractors on the reverse setting even when you're using the cutting end. Not 100% but I swear I read that in the manual for a set I bought

[@virtualvirtual2362]

yeah, you put the drill in reverse

[@seraphimvalkyrin4543]

Not these ones, at least not according to the Wish website.

[@virtualvirtual2362]

ohh well nice instructions then haha, used as intended doesn't work @@seraphimvalkyrin4543

[@drew2616]

watching tyler smack hardened steel with a hammer hurt a lot

[@renagade6389]

We need to see temu Tuesday’s😭 keep up the great work

[@timsawyer9231]

I've bought 2 sets of the "good" ones. The original, that were total junk, then the supposedly improved set.. I've successfully managed to extract 1 screw with them.. Other than that they have completely let me down. And yes, the drill bit suuuucccckkkkksss. It's infuriating how terrible they are. I've even used red helix drill bits to make the hole, then attempted to use the extractor.. Still doesn't work. They are complete junk.. Not even worthy to be in a toolbox under the kitchen sink. Certainly don't get them if you actually use tools for a living..... Both of my sets are in a landfill somewhere. I still get annoyed every time I see them hanging in home depot/lowes..

[@matthewburdick6177]

Didn't he use these backwards the first time he tested them and then the second video was him redoing the test and they worked great? Is time repeating itself?

[@medic-iw6qx]

Tyler, please know to use the cone shaped bit first, you think that cone shaped bit is the extractor when it is actually the file side to wear down the chewed up screw. Then when you flip the bit, the “chisels” what you call the drill bit are the extractor side and they bite into the smooth cone recess created by the file side… this is driving me quite, quite mad…

[@stevenmcdonald2750]

Yea - you might want to go read up on how speedout bits work. You drill it out and use the extractor side you call a file to remove.

[@Donuts_random_stuff]

For me you posted wish Wednesday on Thursday 😂😂😂

[@DonaldHolben]

It's like watching Wile E Coyote lol.

[@fauxque5057]

I have 2 different sets of those. The drill bit is garbage. So I drill with a decent titanium nitrided drill bit and then use the extractor. If you don't drill deep enough the extractor just destroys the hole.

[@ItsTheCostanza]

11:11. Make a wish

[@belizetj]

Mechanic days? Are you MrSubaru1387? 😱

[@yasiralkhattab4743]

Tyler’s beard would do a fig

[@Oscarutz]

Flip the but around and use the extractor in reverse, Tyler🎉❤

[@angrybigfoot752]

anyone else waiting for the head of the hammer to fly off lol ?

[@wadewilson6135]

I feel like these bits would work better using a drill press over a hand held drill

[@timsawyer9231]

You realize that 11 out of 10 times you need an extractor, you wouldn't be able to use a drill press, right? Even if you could, there's no way it would work better.. You need to have complete control of the speed, drill presses don't work like that, it would just tear stuff up. Stick to regenerating limbs and one liners ;p

[@Cupcake_Murder]

You need to do Temu Tuesdays as well

[@meauxjeaux431]

EVERYTHING IS SUCH CRAP NOW, THAT IT COMES AS A SHOCK WHEN SOMETHING IS QUALITY.

[@rogerstlaurent8704]

100% agreed

[@enderarmy2042]

See like I said in a live stream CRICKETS! I actually like them. It makes the video really homey for me

[@cristianmoore1996]

Why are you bearing down on that drill? You’re going to ruin those bits super fast. You only need a little bit of downward force to keep it in place and from slipping.

[@ClearShotYoOfficial]

Looks like you're using the drill end and not the extraction end 7:25

[@chuckthetekkie]

When are you starting "Temu Thursdays"? LOL.

[@WOMANIZERJERRY]

Tyler puts his eyes about 6 inches away when drilling, without safety glasses on. Those bits are hardened, they shatter when they break.

[@and9290]

lol, at one point even his beard got really close to the chuck.

[@simplybeanjelly]

Yeah, screws are too hard for a high speed steel alloy. Not suprised these sucked, if the drill bit section was cobalt they might have had a better chance, but I still doubt that the actual extractor section wouldve been any good.

[@MuttTheNoob]

Flex has a super glue now … u gotta try it

[@willcox2073]

drill in forward damnit!

[@Brooksj824]

Kinda funny, WISH Wednesday, and the video is 11:11 mins long. Lol (11:11 make a wish) haha 😂 disregard this comment, im half asleep, and it sounded funny. Lol 😂

[@TooSketchyForYou]

another trick for stripped out screws is put a piece of electric tape over the head of the screw then try to unscrew it with the normal bit

[@georgesimmons4923]

They never work for me. Especially bolt extractors

[@shoresy6927]

Love ya guy but I wouldn't trust you with a fart. Keep up the comedy though.

[@drinkinnworkin]

Try a hammer drill

[@bigrobpm]

This guy has no business being around any tools or powered items, period!!

[@beerbarn21]

Think you might have been drilling it out in the wrong direction, and then left hand extract. But most likely bits of shit !!

[@agares166]

I don't think this tool is intended for removing this type of screws. These types of screws have a small and shallow head, and I can't imagine a situation when I use such a tool to remove such a screw from a wooden beam or plasterboard - it's stupid.

[@madisonnnnn]

Let’s go tyler

[@Trina_White]

Lol, i am too dumb for these, i have tried them before and i just make it worse. Thanks for the video sir!

[@kenmeuse2226]

Does anyone else wonder what the want ad for mechanics said for him to get the job? Wanted someone who can identify a wrench 3 times out of 10

[@idredrici9058]

This is just painful to watch tbh, even your other screw extractor set needs to be drilled with the right size first. Drill looks like it's going the wrong way for the rest. For the love of everything holy... at least ready directions before you claim it's crap... Also, these are rarely used for the type of scre you have due to no neck substance. These are usually for bolts with at least some meat and a solid head.

[@winstonbattle]

right tool for the right job eh.. says the guy using a drill instead of a screwgun... you making me crazy bro...

[@SoCalMoto626]

Did you make this video 11 minutes and 11 seconds long to say 11:11 like make a “wish”?

[@lunalovegoodwitch]

It's a good video but if he has already done a video similar then why make it again or make 1 similar to one he has done before

[@Benji_405]

Yooooo 🔥🔥

[@1ohmwrecker]

The playback on this is weird

[@N8DE420]

😂😂😂😂😂

[@elhefe9065]

Your using the wrong side for extraction

[@ianbeckuk]

Temu Thursday pls????

[@jenneweiner]

There is absolutely no possible way he was a mechanic.... i wasnt a mechanic and im 100% sure im more competent than him in every possible way. Im 23😂

[@snowballil3133]

😀😂

[@ttvtryhardlit2897]

What's up 😁

[@Donuts_random_stuff]

The sky

[@MrJuuddss]

what a tool and i dont mean the extractor

[@lukerhodes7417]

You need a better drill brand mate, not drill bits. Jesus Christ 🤣

[@justfly60482]

Not buying wish crap. Lol

[@loophead614]

Comment

[@XuroX.]

.......

[@beaud3035]

Its almost like he has no idea wth hes doing or talkn about.

[@MuttTheNoob]

Temu is better first off…. 2nd why is everything tool related..??

[@molyoxide164]

Y’all shit him but you’re still watching his content jsin