DO THIS Before Replacing your iBR | Sea-Doo RXTX, GTR, GTi, GTX, RXPX, wake, fish, + Calas Tech Tips

  Рет қаралды 5,571

CALAS WORLD

CALAS WORLD

Күн бұрын

Is your Intelligent Brake & Reverse (iBR) Broken, stuck, or has stopped working, you might want to try this first before Replacing the whole unit.
LET'S SEE WHA HAPPEN!
Calas Tunes for Stages 1, 2 and 3 NOW AVAILABLE with Riva Map Tuner
Be sure to check out RIVA RACING at rivaracing.com/
Calas Cam Springs and retainers Now Available at www.calasperfo...
Be sure to check out VP products at vpracingfuels....
Be sure to follow me on
IG -0 / calasperformance
FB - / calasperformance
Check out my website for the Calas Performance PWC parts for Sea-Doo and Yamaha
Calas Performance www.calasperfo...
Check out DDR Performance
ddrperformance...
Check out the fizzle factory
www.fizzlefact...
#jetski
#seadoo
#yamaha
#waverunner
#techtips
#pwc
#rivaracing
#worldrecord
Music from #InAudio: inaudio.org/
naudio - Infraction- Sea Level
Dessie Vizcaino - Director/Video Editor/Producer/Drone Pilot/Videographer

Пікірлер: 50
@maxxx408
@maxxx408 3 ай бұрын
I had the same issue with mine, opened up the IBR and tested the actuator with 12V supply, the actuator was indeed dead, ordered one from amazon (30$) replaced and been running it for the past 2 years, havent had an issues with it so far. I know your not a fan of none OEM parts but its an easy and fast fix that costs a fraction of a new IBR.
@billy-bo-dilly
@billy-bo-dilly 3 ай бұрын
Helpful hint for you saltwater guys, use triple guard grease on the steering nozzle bolt and the IBR arm bolt. It is a much better choice than locktite in the salt. The 3rd Gen IBR came out in 2021, and greatly reduced the problems with the IBR units themselves. It's always great with electrical issues to have another part to use as a diagnostic tool. As always, another great video from Calas.
@fredericosanchez5318
@fredericosanchez5318 3 ай бұрын
Roland doing the Stanky leg dance right at 12:32 🤣🤣🤣
@DessiLu14
@DessiLu14 3 ай бұрын
Wow Roland got some good dance moves 12:20 🤣🤣🤣
@badm0t0rf1ng3r
@badm0t0rf1ng3r 3 ай бұрын
I pick up my 325 in a few weeks, I'm gonna break it in and bring it to you for the cams and valve springs.
@Bentleymetalworx
@Bentleymetalworx 3 ай бұрын
We need a disassembly video on this IBR to see possible failure points please .
@Chon4180
@Chon4180 3 ай бұрын
Really enjoy the video. As a DIYer for my own ski you really help with usefull tips so I "don't waste my money!"
@StangCartel
@StangCartel 3 ай бұрын
Lmfao at Roland with the stanky leg dance. He is a dancing machine
@skuterywodne_com4031
@skuterywodne_com4031 3 ай бұрын
😂Your buddy in the background is the best 😆😆😆 he dances very well
@DessiLu14
@DessiLu14 3 ай бұрын
Roland. The man hates being on camera. I don't think he realized the camera was recording.🤣🤣🤣
@doradomarineservices4855
@doradomarineservices4855 3 ай бұрын
If you need heat but no open flame use a induction nut heater it is saver
@johnnyringo2550
@johnnyringo2550 3 ай бұрын
Another fun and Educational video from Calas Performance !!! Your Twin helper is very entertaining , and the guy in the background doing the Texas two step is funny 😂 Happy Labor day from Austin Texas 👍🏼👍🏼 I B R == I be Riding tomorrow on Lake Travis 😀✌🏼🌊🌊🌊 ~ Johnny with the 07 RXT 🌊
@cday6160
@cday6160 3 ай бұрын
Great vid as always Calas.
@davidbalan6571
@davidbalan6571 Ай бұрын
I have had to re- calibrate with BUDS a couple times after replacing iBR units the older years .
@wettlovkov
@wettlovkov 3 ай бұрын
I see what you did there 😅👯
@gregnowling3128
@gregnowling3128 3 ай бұрын
you need an induction bolt heater
@pablogimenez8369
@pablogimenez8369 3 ай бұрын
I love your instructional videos !!! Keep them coming 😁
@MedSmail7
@MedSmail7 3 ай бұрын
Good luck 💪
@TheBoutiqueHotel1
@TheBoutiqueHotel1 3 ай бұрын
Great video I never undo the bolt on the Ibr bolt just unscrew the whole arm and actuator out of the IBR no and screw back in when IBR is back in ski ???
@AhmedHamed-ow3mn
@AhmedHamed-ow3mn 3 ай бұрын
I luv your videos it's very useful. From your experience Can you give us the best way to protect the harness and avoid problems that came from harness?
@MikeZ32TT
@MikeZ32TT 3 ай бұрын
Thanks great video
@jordigrau3625
@jordigrau3625 3 ай бұрын
Woha great video. I dont have ibr because 255 dont have it, but if someday i buy a new one, sure i will watch this video again. Thank you for all we learn from you. ❤
@SE.PWCTECH
@SE.PWCTECH 3 ай бұрын
Hey man PWC tech in south Florida the IBR arm/rod will unscrew from the IBR u can unscrew that entire assembly with the arm and the bellow and save some time just unscrewing that rod with the bellow and arm and nut all together never had a issue with doing that so far when your reinstalling the rod i screw it all the way in with the arm connected then back it out till it lines up auto calibrate and its good to go. just a heads up man! love the content!
@DessiLu14
@DessiLu14 3 ай бұрын
Thanks for the tech tip . It makes sense doing it your way . Might save more time doing it
@SE.PWCTECH
@SE.PWCTECH 3 ай бұрын
@@DessiLu14 Luxury of being flat rate 🤣
@jetson328
@jetson328 3 ай бұрын
Another great learning video, Thanks Ernesto
@TheBoutiqueHotel1
@TheBoutiqueHotel1 3 ай бұрын
The white plastic pieces in them can wear, do you ever open them ?
@MedSmail7
@MedSmail7 3 ай бұрын
I am a jet ski mechanic in Algeria I would like to work with you😂
@omarhelmy295
@omarhelmy295 3 ай бұрын
What is the best way to use the ibr when you are N mode or F and 10km something like that or staying?
@superk4562
@superk4562 3 ай бұрын
Ernesto, you know I love you man, but how many people have a used IBR module just laying around?
@DessiLu14
@DessiLu14 3 ай бұрын
You can maybe try getting one from a buddies jetski?
@superk4562
@superk4562 3 ай бұрын
@@DessiLu14 right, and your buddy is just going to let you cannibalize his ski ... and he'd have to have the identical IBR module. Also not likely.
@JuanGonzalez-dt6vp
@JuanGonzalez-dt6vp 3 ай бұрын
Hi,I would like to know if you and Cuco would ever make a video like the ones you make but from Yamaha…👍🏽👍🏽 Thanks
@calasworld
@calasworld 3 ай бұрын
@@JuanGonzalez-dt6vp yes they’re coming soon
@John-kp1ql
@John-kp1ql 3 ай бұрын
I’m getting an intermittent ibr and check engine light code u0401 on a 18 rxp 300
@chrisgilfond4485
@chrisgilfond4485 3 ай бұрын
I too have intermittent IBR error on my 2015 GTI155. After ski sits overnight it works fine but then starts beeping and throwing lots of errors after 2-3 min. Calas does that sound like bad IBR or harness issue?
@John-kp1ql
@John-kp1ql 3 ай бұрын
@@chrisgilfond4485 the plug for my Ibr had moisture in it and was corroded. I think because it’s right next to the exhaust the heat caused it to short once it warmed up.
@Onepunchfpv
@Onepunchfpv 3 ай бұрын
Lol funny your mate that doesn't want to be on your videos,
@reecejones1248
@reecejones1248 3 ай бұрын
Hey, I’m sitting here wondering why you only work on seadoo’s and not any other manufacturer especially since I know you’re into performance mods and all that just curious
@DessiLu14
@DessiLu14 3 ай бұрын
He did say he is going to do some yamaha tech videos with Cuco
@waverider5751
@waverider5751 Ай бұрын
The inductive heat torch works in tight areas without flame, if you really need heat on a bolt head. Pumps and IBR’s are notorious for stuck hardware…
@YirmeYahuShamaYahu
@YirmeYahuShamaYahu 3 ай бұрын
Nice a spare Ibr ..Hmmmm.
@mandingo9758
@mandingo9758 3 ай бұрын
Buy a working used iBR and Riva MaptunerX
@SeaDooEric
@SeaDooEric 3 ай бұрын
Cool info, but i dont have BUDS
@calasworld
@calasworld 3 ай бұрын
@@SeaDooEric you can actually program a use IbR with Riva maptuner but unfortunately, you cannot program a new one it needs to be with buds
@mandingo9758
@mandingo9758 3 ай бұрын
A used working iBR with MaptunerX works. Did it on a few of my customers Sea-Doos
@AchikSarih
@AchikSarih 3 ай бұрын
😂😂😂😂😂😂
@rasecabreu242
@rasecabreu242 Ай бұрын
Hay que programar el IBR nuevo?
@calasworld
@calasworld Ай бұрын
@@rasecabreu242 si
Farmer narrowly escapes tiger attack
00:20
CTV News
Рет қаралды 15 МЛН
Masterful Car Restoration: Reviving a Salvaged Vehicle for $1000
37:33
Mechanic Han
Рет қаралды 1,6 МЛН
How to remove and replace IBR Sea-Doo GTX (2010-2015)
16:40
Cape Cod Jet Sports
Рет қаралды 6 М.
Exploring Lake Osbourne on Sea-Doo GTI / GTR & Yamaha GP1800R HO
8:14
'21+ SeaDoo RXPX Stage 1 TOP SPEED
6:03
GreenHulk Garage
Рет қаралды 8 М.