Do you crimp your own hoses? Its so easy!!

AIR, Argon, Oxygen, Acetylene, etc. Repair them easily with cheap parts! How inconvenient to stop working and run to the weld shop for a hose repair. Hose clamp?? No way!! Use this more professional looking method. OK infomercial script aside.....I have used this hose crimper for a while now and it has proven invaluable. The ferrules are available in a wide variety of sizes online or locally. The crimping tool is much cheaper than you'd expect. Same with the ferrules. Certainly worth considering adding it to your kit.
Thanks for watching!!
LINKS!! Be sure to measure your hose, inside and out, before ordering
VISE-CRIMPER amzn.to/2NWK0Nx
BENCH TOP CRIMPER: amzn.to/2TtRkoy
Air hose ferrules (5/8 OD hose) 50pk amzn.to/2Sp9gAc
12 pk amzn.to/38qibqK
Air hose ferrules (3/8 OD hose) 50 pk amzn.to/31U98fm
12 pk amzn.to/2tUjUWa
1/4 to 1/4 barb 12pk amzn.to/2UPh7Zi
3/8 to 1/4 barb 12pk amzn.to/2vrexhN
3/8 to 1/4 barb 10pk amzn.to/37lpdvr
TORCH HOSE REPAIR WITH TOOL amzn.to/2zOCbX8

[@unitedstatesofbuild4915]

ALL products are also linked in the video description: VISE-CRIMPER amzn.to/2NWK0Nx Air hose ferrules (5/8 OD hose) 50pk amzn.to/2Sp9gAc 12 pk amzn.to/38qibqK Air hose ferrules (3/8 OD hose) 50 pk amzn.to/31U98fm 12 pk amzn.to/2tUjUWa 1/4 to 1/4 barb 12pk amzn.to/2UPh7Zi 3/8 to 1/4 barb 12pk amzn.to/2vrexhN 3/8 to 1/4 barb 10pk amzn.to/37lpdvr

[@chadsimmons6347]

The solid crimp wont allow the end fitting to turn, without turning the entire house, when trying to tighten, no-spin,,,no-good

[@joell439]

Thank you for sharing how simple it is.

[@richscatenclosures7535]

Yes!!!! I have been tightening my hose clamp and listening to hissing air lines. Love how you had your other videos conveniently linked throughout your video. Enjoyable to watch. Just a real dude doing real work.

[@dm7097]

Awesome! I saw these online, but wasnt sure how effective it would be compared to the more expensive tool. I don't do enough to warrant the pricey machine, thanks for making this video.

[@slaplapdog]

I'm just getting into air tools, this is something I needed to know.

[@seanmotyl4754]

"....and somewhat professional...." PERFECT!!! Thanks very much for the video!

[@t.e.1189]

Thank you, thank you, thank you so much for sharing this. Previously I always used a hose clamp and hate it. This is so much better. I'll be buying the crimper and ferrules for sure.

[@cryptoguru4127]

extremely helpful, just made my first. However the fit was so tight i gave myself a blister pushing so hard. But it worked and now i have a great compressor hose.

[@CaptK-py8rq]

Great idea, thanks! Now I'll go repair all my hoses, much appreciated.

[@JohnLee-bf2ux]

Thanks for teaching this half crimp rotate then crimp again technique. I have been excess crimping and locking out my rachet crimping tool.

[@markmitchell2794]

A perfect shop ! .... woodworking , metalworking & old cars/trucks ! + garbage cans with holes in em

[@ericgautreaux1752]

Learning to do as many different things as you can is great brain exercise as well as a great way to save money.

[@BIGKITYDAVIS]

Thanks for this video. It solved my air leak problems at work! U the man!

[@crpth1]

Excellent complement to the workshop. For what it's worth, the best "air" accessory I've ever put on my workshop, is a hose reel. Strategically placed where the hose as access to the full area of the workshop. It's a cheap Chinese made unit that as been on service for a few years now. Best investment ever for "air" stuff. Hose is always ready and never on the way. Got rid of all those hose rolls spread all over the place, never tripped on a hose again. ;-)

[@schlomoshekelstein908]

i pick up the old plastic garden hose reel carts people throw out and cut them down for my vacuum hoses and air hoses, even electric cords

[@screwsnutsandbolts]

Excellent videos ! 👍🏻

[@spelunkerd]

My first reaction was to be all over this idea, it gives a professional look. Then I measured the outside diameter of my hoses, they differ a little because some hoses are silicone and others are old style. On reading some reviews on Amazon, readers note that you need to buy the ferrule to be a fairly exacting fit. So I'd be looking at buying an inventory of ferrules. I stumbled across an older style method of permanent clamping with stainless steel wire, and a device known as the Clamptite tool popped up. The nice thing about that is the way it is versatile, you don't need to buy ferrules, and it works on a multitude of other situations like garden hoses, etc. Or one could use the same kind of crimp clamps used for outdoor sprinkler installation and repair, which I already have.

[@lzh3131]

I watched & subscribed to a different video that really helped answer some questions I was having about painting a trailer. I was rewatching & decided to look at some of you’re other videos & found this video. I really appreciate this video. Keep up the good videos. I like your direct explanations. Thanks again!

[@White_buffalo_4r]

Thanks for the quick DIY on this I thought that's how this was done but it just assures me on it now.

[@1john52013]

Great video, I also like your storage area. Thanks for the tip.

[@brdnsky6417]

Thanks for the tip and info on how to use it. Ronnie.

[@xushenxin]

It solves lots of my issues. Thank you so much.

[@robertcalaway4970]

Ihave been using PEX plumbing crimp rings and a PEX crimper to do this for years. It works great.

[@melgross]

I’m happy I just saw this video. It’s always been a pain using that tool, and I even spent more and bought the one McMastercarr sells, hoping it was better than the generic ones everywhere else, but nope! Same tool.

[@pamil1923]

Thumbs up to you for including all the links buddy!👍🏼☮️

[@RatRodBobBuilds]

I'm diggin it!

[@douglassmith2055]

Great vid thank you, have been thinking about this same thing in my home shop.

[@HippyHouse]

Trying to find a replacement hose for my harvest right outlet, you said it, gotta make my own! Thanks for the video.

[@USNERDOC]

Excellent! I am going to add that capability to our ranch shop. Thanks! 🙏

[@user-ju5hb7fh1c]

thanks for showing us how its done

[@swank1975]

Awesome. I was about to use a barb and hose clamp. Now time to get some ferrils and a set of those vice grips!!!

[@billashe2108]

Hahaha! I´ve been doing it wrong all the time. Now I see how it´s done. Thank You Sir! I have been pinching the ferrule in a horrible way.

[@unitedstatesofbuild4915]

Thanks!

[@lionheartchannel5842]

Thanks for sharing this video Sir.

[@mikekopisz1227]

Good video....I've had this kit for years but could never get them to come out right and now I know the reason.....needless to say,I was over-crimping the first crimp....just did a splice on an air hose and finally,it came out right!...thanks for showing the right technique 👍

[@unitedstatesofbuild4915]

Right on, thanks for watching.

[@rontiemens2553]

Do you crimp all the way down AFTER the first crimp?

[@jesusesquivel165]

Unitedstatesbuild@@unitedstatesofbuild4915

[@email4664]

@@rontiemens2553 did you watch the video?

[@rontiemens2553]

@@email4664 Yes. Three times. He does not explicitly state one way or another whether subsequent crimps are all the way down or not.

[@AKLINTMURT]

thank you, I'm going to make one

[@regmartin688]

Great video very helpful.

[@unitedstatesofbuild4915]

Glad to hear it!

[@sdowney717]

Have done similar using flaring tool. That flare tool can hold and compress just like the vice grip tool.

[@JT-gq8wv]

Nicely done. Thanks - I subscribed.

[@mekanikobisdak4490]

Useful tools

[@makeitpay8241]

OUTSTANDING!

[@jj-ud9im]

That was so easy!!! I'm going to make one for my s wand for my prochem carpet machine

[@unitedstatesofbuild4915]

Have fun!

[@killabee623]

Good throw !!!

[@deletoba9162]

big love and Thank you so much for this video from the heat of Nigeria, W. Africa.. i will never pay for hoses off the shelve again.never!

[@unitedstatesofbuild4915]

Thanks for watching!

[@paultrimble9390]

Going to start. Thanks. Another tool I have to have. Lol. Really thanks only reason didn’t have my building Plumed for air is price of kits. Ouch hurt the pocket.

[@txsviking]

Nice.

[@treehouseoffroad]

Thank you!

[@malkaeli]

at last, someone doing the right thing.

[@monexchannel9827]

Brilliant! Many tnx!

[@BNTFLEX]

very good

[@juanescalante9972]

The links in the description were very helpful

[@jessicav2510]

Well that was easy!

[@vtxdaryl]

Don’t know why I watched this video but it was entertaining, thanks.

[@steveesposito]

1:25 I've noticed a pair of cheap Harbor Freight pliers style cable cutters work great on reinforced hose.

[@MrCecooke63]

Nice editing

[@AaronArcher-jh1jn]

Thanks!!!

[@plumber77mjr]

Did you fully crimp all other crimps? Only the first one not fully, wasn't clearly explained? Other than that, great video, loved all the camera angles like from the shop crane, 4-way split, etc. I also loved how you linked all the other videos as you were going along, see shop tables here's the link! Great idea, never seen it done that way. Thank you!!!

[@Samartrader]

Thanks dear ......love india

[@unitedstatesofbuild4915]

👌

[@vineysharma2313]

Good

[@tayro7265]

Good video. For decades I paid people to do things I have since learned to do myself. I had a transformer fry in my welder. Lincoln said no probs man. Then quoted a price I S Y not was ten bucks less than a new one. And the new one comes with all the toys. $168.85 later and boom. The $168.85? The cost of the wire to rewire the secondaries of the transformer.

[@PadmaDorjee]

Hey Man, thanks for an awesome educational video. Do you think that kit and connections would be okay for a 2600psi water hose for a pressure washer? The hose max psi is 3100 but my machine max is 2600psi. Thanks from 🇦🇺

[@drsnooz8112]

You fancy folks use crimpers. We hillbillies use hose clamps. ;-) Good info. Thanks!

[@buixote]

I've been thinking about this for a while... wondering if you could do the crimping with a hose clamp... put a couple of dowels around the ferrule, then put the hose clamp around those, and tighten...

[@williamgibb5557]

What was working for me, was to use crazy glue on the insert and then crimp the ferrules! Guaranteed not to leak or loosen! Ever!

[@mathieudutre9968]

Looks great. Anybody an idea on where to find this tool? Struggle to get a link. A shop in Europe would be appreciated. Would like to use it to crimp new fuel lines on the injectors for my oldtimer project. Support appreciated!

[@vr6caddy843]

Nice, learn something new everyday. been looking for 13mm internal hose of a specific length which is impossible less than 10m and stupid money. What psi rating for those fittings or is it dependant on the hose. Also would 150psi hose be okay for my 145psi compressor or is that cutting it a bit fine as was looking at fuel line hose ( 20bar max) which is considerable cheaper. thanks in advance. Oh meant to say I'm after 1/2 inch stuff to feed vapour blasting cabinet.

[@starhopper457]

I'm wanting to make some modifications and custom propane lines... same tools, same principles?

[@thzzzt]

There's an alternative to this. Not many people know about these, but they are the two-piece reusable screw-on air hose ends. They are all-brass do-dads I get from MSC. No tools, crimping, tape, ties, or pipe clamps are required, just a vise and few standard wrenches. There is an internally threaded sleeve that screws over the OD of the hose, then you screw a stem into that, which penetrates into the ID of the hose, and sandwiches the hose between it and the sleeve. There is a KZbin video on these. Search for "brass reusable fittings" by Dixon Valve.

[@ericbrumbaugh4114]

Get yo own channel bud, my man here trying to get that affiliate $$

[@thzzzt]

@@ericbrumbaugh4114 Yes, I'm sure I'm going to make Dixon an extra $17 dollars. And oh boy I want a slice of that!

[@ericbrumbaugh4114]

No, I’m fixing to do my own video for the product you taking about. Thnx

[@thzzzt]

@@ericbrumbaugh4114 Sorry, I misinterpreted.

[@baxtergk1]

You could simply buy Hansen (now Eaton) fittings and eliminate the crimped fitting. They're more compact, and reusable.

[@rogerdickinson920]

Looking for a 1/4" hose splicer, so it would have a barbed insert on both ends and ferrules over to repair a punctured hose. Also the ferrules seem to be a ridiculous price. The 11 or 12 bucks to purchase and 44 to ship??? any other solutions. I had a set of vicegrips like those 40 yrs ago but they disappeared from the shop I had at that time.

[@photog1529]

Well, I'm using 1/4 ID Flexzilla air hose. The naked OD is 0.460 and the hose ID with the barb inserted is 0.482. I'm also using the 0.500 ID ferrules as recommended by the Interstate Pneumatics on-line catalog (next size up from 0.482). I'm using brass barbed fittings I purchased from McMaster-Carr. After slipping the ferrule onto the hose and inserting the barb, these crimper pliers are not compressing the ferrule, much less even making a mark on the ferrule. Either I'm doing something wrong, or the vise grip crimper is useless. Really trying to avoid using hose clamps, but time is getting short and I may have no choice.

[@tonygatto48]

Where do you get the washers for the quick connect when they go bad ? I cannot find them anywhere

[@garymucher9590]

I realize this is an older video, but great job showing how it can be done. Do you know if you can do the same with garden water hoses as well? Thumbs Up!

[@mainelyelectric]

For garden hoses you might able to get away with those stainless steel single side crimp pex/poly pipe crimp rings Of a size that slides over the hose but still allows it to crimp down. If they do work I would recommend doing two per end with the pinches offset of each other.

[@williamodom2698]

Did you purchase the red couplers on Amazon?

[@dennispajalla844]

Gud day Sir..can this crimper vise also can crimp for high pressure hose?thanks

[@ryannastaj]

Hey, trying to fix a propane hose (would pics help) and it brought me to your video. It's a propane hose that connects to the (tanks 100#) and to the Tee to the portable generator. No one in town will touch it... Idk why??? And I don't wanna spend another 55$ for a 25' hose. (When there's a 6 inch section that got melted by exhaust) will this work safely? For what I need?? Thanks

[@fartsonbasketball9206]

What size ferrule would you use for a 1/4 ID and a 3/8 OD tube?

[@jacobhentschel2111]

Will this work for propane hoses and fittings?

[@johnhargreaves2647]

Hi looking to do this myself who sells the crimper pliers and Ferrell

[@dj1NM3]

You also might be interested in the threaded connections for gas hoses from Cigweld/Esab www.cigweld.com.au/product/hose-connection-kit-5mm-screw-type-5-8-18-unf-rh/ Totally reusable and only needs two spanners or crescent wrenches to attach and remove, although you might want a 5/8" UNF bolt for assembling the hose-ends on (rather than putting stresses on the gas fitting of your machine or gas regulator outlet). The UK version uses 1/4" BSP Right Hand Thread (which is also 5/8" external thread, but I don't know what threadform. Possibly "British Standard Fine" [BSF]) which appears very similar, but is *not* interchangeable.

[@nasserreyescastillo81]

Hola mi buen amigo mi nombre es Nasser Reyes Castillo soy de Costa Rica CA quiero felicitarlo por tu vídeo está muy bueno ya que había visto varios sobre selladores de acoples de mangueras y lo más ideal es la herramienta que usted utilizo, tengo una pregunta dónde la compro para yo poder obtener una como esa, ya que estoy en un proyecto personal, gracias y saludos y como decimos por aquí PURA VIDA........

[@joefriday950]

Great video. Thanks. What is the name of the clamp tool you used. Could you tell me where you got it and the attachments. Thanks again

[@unitedstatesofbuild4915]

Check description. Thanks for watching!!

[@cesartrevejo6562]

Great video, how do you remove the crimp? I have a tire inflator with those of crimps.

[@unitedstatesofbuild4915]

cutoff wheel, just cut the ferrule, not the barb.

[@angeloruso4961]

Can i use that tool on my coolant hose of my truck ?

[@garryverniest5893]

A few wraps of wire and some tape, no fuss, no muss.

[@peterlakers1]

CAN THIS BE DONE ON POWER STREEING HOSES ., OR ANY LIQUED HOSES... DO YOU HAVE A LINK FOR THIS TOOL.. THANK YOU..

[@AlaaWadi85]

good timings of music

[@unitedstatesofbuild4915]

thanks!

[@PARKERBROTHERSPLUMBING]

Will this be ok on a 4000 psi power washing hose?

[@franzp.4780]

What is the name of that crimping tool like a vice grip..

[@ranggengjaya97]

Iam subscribe 🙏👍👍👍

[@kellygable1668]

great video , do not lubricate any fittings to be used with oxygen with oil , maybe soapy water .

[@dennispajalla844]

Good day Sir where to buy your crimping tools.thanks

[@oh8wingman]

At 1:46 you suggest that you use a little bit of oil to ease the installation of the hose barb. When making up or repairing Oxygen hose this is a no no. Oil and pure Oxygen can catch fire and burn inside your hose until it burns the hose out. If you look at your Oxygen gauge it says the same thing. USE NO OIL.

[@unitedstatesofbuild4915]

Yep, Great point

[@florencionapigkit6017]

Hello sir where to buy those ferrules and your crimping tool?

[@dennispajalla844]

Is that can be use for water hose pressure??

[@user-od2bp9lo6p]

Where can I get the tools and the pipe connector?

[@russellstephan6844]

There's even an easier, cheaper, and more versatile way... Have a gander (Internet search) for the Clamptite wire clamping tool. Although pricey, one can fabricate their own version out of a split-body turn buckle which I did. I've used the wire clamping tool to fabricate dozens of air, garden, and fuel line hoses. Once the tool is built/acquired, the only supply cost is for a can of stainless steel safety wire...

[@grunkybouy]

Where did you get your crimping tool and kit?

[@Tessad207]

What is the size for the male argon hose? I’ve been looking and can’t find it

[@eastcoastlife3547]

Do you think you can use air hose for low pressure pressure washer hose? 1000 psi.. just more flexible and cheaper..thoughts

[@joejackal3852]

When will this product be available in India.

[@bushratbeachbum]

Wgat sort of air hose is that flexible? What's it rated to?