Thank you for recording and posting this valuable educational video

Anyone in Tampa FL that can build that for me??

Very nice job! i wondering if this could be done for 600lb atv?

Thank you! I have this video saved for every time I want to use one of my HVLP sprayers. Several months may go by before I will use my HVLP again... a lot is forgotten over those months. I do want to break out my HVLP sprayers and practice more often. The flick technique at the end of a stroke is something that definitely needs practice.

Everything about money and painting over rust. Fk you

This is by far the best video I've seen on this!

Will this work for oil based krylon rust tough paint?

I got a harbor freight purple spray gun . Im going use rustoleum paint mixs with paint thinner i wonder if the nozzle that comes with the spray gun ok i notice alot people drill a bigger size hole when using certain paints . rustoleum is pretty thick paint so i wonder if i have to modify my nozzle or can i just spray it with the regular nozzle that the harborfrieght gun came with i think the tip size might be 1.4 - 1.7

A lot of dishsoap contains salts as a thickening agent. It might well be contributing to the flash rust.

One of the better and complete builds I've seen

I am doing this very thing right now. Painting my Bronco with kubota orange tractor paint. It isn't high gloss like a bc/cc job, but it looks really good for what it is.

*Excellent information* Do you have any videos on painting cabinet doors? Look forward to hearing from you and thanks again 👍🏻💥

I did a Rustolium paint job years ago on my Dodge Flatbed. No real bodywork mostly just red lead filler, Had to experiment with the thinner till I got a good spray. Did this over a good sand-able primer. Two coat finish. No sealer. Man it was a tough paint and it stunk for weeks. Took forever to really cure. Here’s the kicker, about two months later my “buddy” stole the truck and crashed it into a thorn hedgerow. Had to get a specialist to pull it out it was so far down and deep in the thorns. Tore a mirror off, but that was the only damage the paint was un-scratched. Thanks for the information, bought a 1991 Dodge 1st Gen Cummings. Solid body, crap paint.

When spraying enamel paint do you end with a clearcoat?

Will catayst improve paint wear by making the paint harder to scratch. I am spraying a plastic canoe and it will flex.

EXCELLENT VIDEO!!!

How thick was your bumper, what size 5"? 3/16?

good watch

Taylor Christopher Hall Mark White Ruth

I see this video is a little older u priced wd lately lol not cheap anymore definitely like how u sprayed it though

You would make an excellent instructor, I believe in any field. Thanks for the heads up on everything. Duran the Handyman Dallas, TX.

At what point are you just better off getting an enclosed inverter generator?

Smith Susan Hernandez Lisa Wilson Donna

Good lord of caulk 4:01

I'm not sure if you will see this knowing how old this video is, but I use Rustoleum rattle cans a lot on bare steel and cast iron with body shop results. The key is etching your work piece with acid like Lime-Away or a 50% diluted of Muriatic Acid and water for up to an hour if rust is present, wash it off with plenty of water, wash it again with 91% Alcohol, dry it with compressed air, and pre-heat your work piece to 150 degrees before spraying. The paint sticks immediately like glue, no chance for runs, and cures rather quickly, less than an hour. Pre-heating your workpiece makes your paint self level like it cam out of a body shop. Hope this helps guys. Use an infrared thermometer to know the proper temp. :) I restore vintage cast iron machinery from post WW2 with amazing results, you just have to remove the rust in an acid bath so it's back to raw cast iron or steel. The outcome is truly amazing.

Awesome dude. Thanks for the valuable information... I'm doing the same thing, trying to keep the rust off my welding projects at home

Found this very helpful bought some Rust-Oleum to paint a tool box with. Hopefully it comes out looking as good as that.

Make a table top stand for it. Zip tie the trigger and use a foot pedal it will quickly become your go to for quick cuts on projects.

My old portaband that’s identical to this one is the best investment and one of the most used in my shop. I built a stand that you can set it on and an easily removable table for it.

I can't find anyone to dig a hole lol. So my local machine rental is what I'm going to have to do. How long has it taken you to fill a 300 gal tank I may not even leach mine just 2 people in our 2 story tiny home

What about setting the fluid to wide open then holding the trigger until you fill resistance. And then adjust your fluid in from there ? Would that be better or is the way your doing it better or is it all personal preference?

Why is alignment tape necessary

What PSI did you shoot the Satin Black 4:3:1 with? Thanks

Good tip. 🎉

Im using the purple harbor frieght spray gun i notice when i spray with rustoleum paint it comes out like splattering when i use the purple spray gun. Im trying to make that fine spray mist .i add acetone and 60 psi i wonder if im not adding enough acetone when i mixs the paint . B cuz i notice when i clean out the gun with acetone when im spraying out the paint to clean i notice where ever i sprayed its came out smooth with no splattering paint or do i need to adjust and tune my spray gun . I dont have a measuring cup or a mixing thing but i think i put a ratio of like 50 percent paint and may be like 25 percent acetone. I didnt put that much acetone yet at first b cuz i didn't want to mess up my truck paint i was scared that to much solvents could make the paint come off or mess it up my paint on my truck but paint still looks okay .

This video deserves NO thumbs down. Some people just live to complain about anything and everything. I know a couple of guys like that. They think they're cute, I believe.

Great video because of how informative it is.

Whats the ideal psi for rustoleum ?

You can get about 60 rattle cans for the price of the most basic air compressor that will run a HVLP gun. That is why someone spends $100 to rattle can a car, or $50 to roll it on.

4:45 -- should we be wearing a wask during these tests/cleaning? I am just learning how to use these tools. I also wanted to ask what the minimum air compressor needed is and if a tankless compressor is able to be used. I want to paint small projects which are about 1-2ft cube. Also, what types of paints can be used?

How much are these tools?I got one for 20 bucks not sure if it was a bargain or not.

Spray it down with WD 40 as soon as you are done rinsing it. Don't let the water dry and flash rust.

Please dear god allow me to be capable enough to succeed in this and my future, for my family, for my brothers and mother. I pray that I am capable enough.Jeez, I miss dad.

3 years. Is it still holding up?

What make/model resin shed was used in this build? ALl the ones I see are either to big or too small for the WGEN11500TFc.

Still need a little more explanation of exhaust extension through shed wall

Where did you get the gas heater vent and flashing? Can you provide a link? Thanks.

Hey, want to come to California and install one of these for me. Free stay and vacation time at the cabin! This video is awesome

Good idea and i will steal it! Thanks!

What size pipe did you use for the hinges?