Using the drill motor that way is very clever. I think I’ll make something for my lathe. Well done.
@VilsonAlba2 жыл бұрын
grazie :)
@casualcustoms55362 жыл бұрын
Very nice work. refreshing to see someone that has manual machine skills.
@VilsonAlba2 жыл бұрын
grazie mille :)
@CruiserMac2 жыл бұрын
That is a great idea making a drill chuck for the tool post! Perfect way to drill those off set holes.
@VilsonAlba2 жыл бұрын
grazie mille :)
@jameswatters95922 жыл бұрын
some unusual attatchments, never seen some of those jobs done on a lathe before, very inventive
@VilsonAlba2 жыл бұрын
grazie mille :)
@tihzho2 жыл бұрын
Yes NO MUSIC versions are great!
@VilsonAlba2 жыл бұрын
ok, la versione senza musica è disponibile, guarda sul mio canale
@DanKoning7772 жыл бұрын
Agreed; I skipped ahead to see if the music stopped b/c I want to hear the lathe not music. I ended up moving on to a different video after a few minutes.
@penguins96452 жыл бұрын
That was fascinating to watch, but I have no idea what you just made. Still watched the whole thing though!
@VilsonAlba2 жыл бұрын
grazie mille :) questo è un cono spaccalegna e puoi vedere tutti i video del progetto in descrizione... molto presto arriverà anche il video finale
@rudyrayaaw51382 жыл бұрын
It looks like a log splitter to me. It's driven by a engine or motor at a fairly low speed, as it's turning you jam the center of a log into it and it threads itself into the log like a lag bolt, as it goes deeper the "lag bolt" gets wider and wider splitting the log into 2 or 3 pieces. the other thing needed is a way to keep the log from spinning with it which is not difficult.
@scroungasworkshop46632 жыл бұрын
Awesome machining work. You made it look so simple. Cheers Stuart 🇦🇺
@VilsonAlba2 жыл бұрын
grazie mille :)
@Militarycollector2 жыл бұрын
Not bad considering I don’t have a clue what it is or what he said
@everlast2658 Жыл бұрын
Built in taper capability or an attachment or technique. Brilliant
@russguppy87612 жыл бұрын
Very interesting. Key ways Drilling. I like it.
@VilsonAlba2 жыл бұрын
grazie mille :)
@dumontsantos61972 жыл бұрын
Belo trabalho, muito eficiente, parabéns e abraços!
@VilsonAlba2 жыл бұрын
grazie mille :)
@moobaz86752 жыл бұрын
Cool. That was very skilled. I like the drill attachments.
@VilsonAlba2 жыл бұрын
grazie :)
@VERTEXVIETNAM20182 жыл бұрын
Great video. Thanks for sharing. Good job
@VilsonAlba2 жыл бұрын
grazie :)
@marbike212 жыл бұрын
Bello ,in questa realizzazione ti eri veramente superato!! BRAVO VILSON !
@VilsonAlba2 жыл бұрын
grazie mille Marco :)
@__austrianoldboy_9861 Жыл бұрын
Nice work, thank you for sharing!
@philipblackmore60282 жыл бұрын
From where, do guys like this come. Awesome.
@VilsonAlba2 жыл бұрын
:)
@ldnwholesale85522 жыл бұрын
I cut keyways like that at school 50+ years ago. Made a male one as well to join to pieces of bar together
@VilsonAlba2 жыл бұрын
va bene :)
@mariocora2451 Жыл бұрын
Sempre bravissimo.
@fasteddie41072 жыл бұрын
Great workmanship. Molto benne! Thank you for sharing this. How does it get used?
@VilsonAlba2 жыл бұрын
grazie :) è un cono spaccalegna, puoi vedere i video del progetto in descrizione a questo video... tra non molto l'attrezzo sarà completo
@lemin912 жыл бұрын
ciao Vilson e complimenti per le tue capacità e per il modo in cui spieghi, ti volevo chiedere se fai lavori su richiesta di pulegge?
@markgoddard25602 жыл бұрын
Interesting. I wonder what he was making!
@zahirmurji2 жыл бұрын
I was wondering too.
@johnlockesghost55922 жыл бұрын
my guess is wood splitter
@VilsonAlba2 жыл бұрын
ciao :) è un cono spaccalegna e potete trovare tutti i video del progetto in descrizione... molto presto arriverà anche il video finale :)
@amdidextrous2 жыл бұрын
@@VilsonAlba There you go, now we all know....
@amdidextrous2 жыл бұрын
@@johnlockesghost5592 Why would you make a wood splitter in brass?
@samantamusaragno19342 жыл бұрын
Ottimo lavoro vil 😘❤❤❤❤❤
@VilsonAlba2 жыл бұрын
grazie mille Terry 😀
@mocciaantonio15082 жыл бұрын
Grande vilson io ti ho copiato e ho usato lo stesso metodo per farmi una vite come quella, in gnb2 , bisogna essere molto attenti perché sulla punta se spingi ti strappa di brutto le creste del filetto. Sicuramente non è ben fatta come la tua ma il suo lavoro lo fa egregiamente. Grazie!
@VilsonAlba2 жыл бұрын
grazie :) se fa il suo lavoro allora è fatto bene :)
@eugeniopizzorni2 жыл бұрын
Complimenti e Buongiorno Vilson. Ottimo lavoro MAESTRO 🤗🤗🤗🤗🤗🙋🏻♂️🙋🏻♂️🙋🏻♂️🙋🏻♂️🙋🏻♂️
@VilsonAlba2 жыл бұрын
grazie mille, troppo buono :)
@subramaniamchandrasekar13972 жыл бұрын
Must be an attachment for a giant buffing wheel with a 30 HP motor shaft
@VilsonAlba2 жыл бұрын
no, è un cono spaccalegna, puoi vedere tutti i video del progetto nei link in descrizione
@paulsmith21052 жыл бұрын
I think its a log spitter
@paulsmith21052 жыл бұрын
I think its a log splitter
@salvatoreromeo35312 жыл бұрын
Ciao Vilson, complimenti ancora; se ho visto e capito bene, hai ottenuto la conicità con l'avanzamento automatico longitudinale, ma quello trasversale lo hai realizzato manualmente con la mano sinistra. Probabilmente non hai utilizzato il carrellino superiore ad angolo regolabile perché la corsa non ti bastava per tutta la lunghezza del cono. Ma sei riuscito a realizzare quella conicità pressoché perfetta soltanto con la sensibilità e la precisione del movimento della mano sinistra? Grazie e a presto.
@VilsonAlba2 жыл бұрын
ciao :) la conicità l'ho fatta con il carro inclinabile in due colpi mentre la filettatura l'ho fatta come hai descritto tu...
@TrPrecisionMachining2 жыл бұрын
good job vilson
@VilsonAlba2 жыл бұрын
grazie :)
@CJ-nt4csАй бұрын
Guard? I don't need no stinking guard! On my Clausing.
@FrankSurateau-h4y9 ай бұрын
La lubrification est en option
@CirebonMhi-lh3lu Жыл бұрын
Machine use 1 phase or three phase ..?
@altered148fiat2 жыл бұрын
nice work
@VilsonAlba2 жыл бұрын
grazie :)
@SimonEGab2 жыл бұрын
Bravo Vilson 👏🏻👏🏻👏🏻
@VilsonAlba2 жыл бұрын
grazie mille Simone :)
@mariocora24512 жыл бұрын
Indubbiamente sai lavorare al tornio con bravura e maestria.
@VilsonAlba2 жыл бұрын
grazie mille :)
@vidaxhanej84322 жыл бұрын
Benissimo video Vilson
@VilsonAlba2 жыл бұрын
grazie mille Vida 😀
@ChimeraActual2 жыл бұрын
OK, what am I missing? No way you can run that cross slide in manually and maintain depth of cut -- is there? Clever, you turned a battery operated drill into an old fashioned corded drill, way to save on those expensive batteries. Great concentricity with that three jaw chuck!
@VilsonAlba2 жыл бұрын
grazie mille :) la lavorazione è tutta manuale :)
@daveat1912 жыл бұрын
Looked like a manual in feed on the taper to me too. Never ever saw an engine lathe with a geared taper.
@ChimeraActual2 жыл бұрын
@@daveat191 Some Monarchs have that, but it's really rare. Hats off to him for his control.
@davidegorini88822 жыл бұрын
Bravo,davvero interessante
@VilsonAlba2 жыл бұрын
grazie :)
@minhthehonda76902 жыл бұрын
bạn rất giỏi !
@VilsonAlba2 жыл бұрын
grazie :)
@talibramzan39412 ай бұрын
Hello😊
@hmorse782 жыл бұрын
Were you using ceramic tips? If not why no coolant?
@VilsonAlba2 жыл бұрын
ciao :) no, niente punte in ceramica ma in metallo duro... non uso il refrigerante per non sporcare la telecamera
@hmorse782 жыл бұрын
@@VilsonAlba Ahh ok. The tips stood up well considering. Great thread work 👍🏻
@flhusa12 жыл бұрын
Be nice to make a black powder signal cannon out of a piece of round stock like that .
@VilsonAlba2 жыл бұрын
:)
@juwiediuall7456 Жыл бұрын
Sorry - good job😉
@k13ehr2 жыл бұрын
Buffing wheel arbor or log splitter, which?
@VilsonAlba2 жыл бұрын
spaccalegna :) puoi trovare tutti i video del progetto in descrizione! purtroppo non è ancora completato il progetto ma manca poco
@k13ehr2 жыл бұрын
@@VilsonAlba I am sorry but I do not understand that.
@raymondmiddleton3082 жыл бұрын
Is it a wood splitter
@VilsonAlba2 жыл бұрын
esatto :)
@robfrancis88302 жыл бұрын
Did he turned that manually?
@VilsonAlba2 жыл бұрын
si, manualmente come si vede nel video :)
@jbmj2 жыл бұрын
How to choose best tool bit? please help. thanks
@VilsonAlba2 жыл бұрын
dipende da che materiale devi lavorare, per ogni materiale c'è un modello d'inserto dedicato
@inakitxiki75282 жыл бұрын
Tienes planos de como hicistes el taladro en el portaherramientas?
@VilsonAlba2 жыл бұрын
ciao :) no, niente progetto per il mandrino che uso per forare sul tornio... ho solo fatto un video: kzbin.info/www/bejne/hJ-5Y4qcbpJmipI
@hmmumm21642 жыл бұрын
How much hp motor is used in your lathe 3 hp??
@VilsonAlba2 жыл бұрын
si, ho un 3 HP (2.2 KW)
@Nobilangelo2 жыл бұрын
This video begins in a very boring way but then it makes its point in a roundabout way. 😉
@VilsonAlba2 жыл бұрын
grazie :)
@PaddySheeper2 жыл бұрын
Nice 👍🏻
@VilsonAlba2 жыл бұрын
grazie :)
@ВиталийФ-ч4г2 жыл бұрын
Морковка 👍
@VilsonAlba2 жыл бұрын
esattamente :)
@mauroclemente2469 Жыл бұрын
Vorrei vedere la lavorazione di ingranaggi a V filmati grazie.
@jablon15002 жыл бұрын
How this is even possibile?!
@VilsonAlba2 жыл бұрын
è possibile si :)
@einars8992 жыл бұрын
With the part mounted in the chuck like that, max RPM is very close to zero!!! This is not safe at all.
@VilsonAlba2 жыл бұрын
infatti sulla punta è un problema ma con un po' di pazienza, si fa
@candyop3912 жыл бұрын
Good
@VilsonAlba2 жыл бұрын
grazie :)
@thebrizzell2 жыл бұрын
Oh hell.. What is it already
@VilsonAlba2 жыл бұрын
è un cono spaccalegna, puoi vedere il progetto intero nei link che trovi in descrizione
@KW-ei3pi2 жыл бұрын
Very nice work, but please stop the music. I don't think anyone like music in machining videos. Just machine noise would be better. Thanks
@VilsonAlba2 жыл бұрын
se guardi in descrizione c'è anche questo video ma senza musica :)
@maiknakas2 жыл бұрын
Time 0.34 Can you please give me the tool Indexable Carbide Lathe code at the time of the video 2,41 And Inserts thanks !
@VilsonAlba2 жыл бұрын
ciao :) per gli inserti che consiglio, link in descrizione
@maiknakas2 жыл бұрын
@@VilsonAlba Sì amico mio ma voglio solo questo specifico nel tempo che ti ho mostrato gli altri ma non sono interessato grazie mille>
@muzixman20112 жыл бұрын
how accurate are these manual lathes?
@VilsonAlba2 жыл бұрын
0.005 mm
@muzixman20112 жыл бұрын
@@VilsonAlba really? if manual lathes are as accurate as CNC why we need CNC?
@VilsonAlba2 жыл бұрын
@@muzixman2011 i cnc hanno una potenza di produzione molto superiore. se devi fare 1 pezzo puoi usare il tornio manuale ma se devi fare 100 pezzi, meglio usare un cnc per fare presto
@zahirmurji2 жыл бұрын
What did he make?
@VilsonAlba2 жыл бұрын
è un cono spaccalegna. per vedere tutti i video del progetto, vai in descrizione al video che ci sono tutti i link
@nando44272 жыл бұрын
Top👏
@VilsonAlba2 жыл бұрын
grazie :)
@altered148fiat2 жыл бұрын
I turned music off the sound of the machine would have been spot on.
@VilsonAlba2 жыл бұрын
ciao :) in descrizione trovi anche il video senza musica con il suono del tornio
@giacomoorru34202 жыл бұрын
Ciao vilson ottima idea lo spaccalegna. Ascolta che ne pensi dei torni zanoletti, una marca tutta italiana. Sono buoni torni?
@VilsonAlba2 жыл бұрын
ne ho sentito parlare molto ma molto bene
@juwiediuall7456 Жыл бұрын
Golf job
@tantraraasa9142 жыл бұрын
Wondering what were you trying to teach. Isn't it a waste of material and time.
@VilsonAlba2 жыл бұрын
ciao :) non è uno spreco di materiale e di tempo perchè il prodotto funziona... se vuoi in descrizione ci sono tutti i video di questo progetto
@apistosig41732 жыл бұрын
Bellisimo
@VilsonAlba2 жыл бұрын
grazie :)
@pickin4you2 жыл бұрын
Sorry, but what was it?
@VilsonAlba2 жыл бұрын
è un cono spaccalegna, puoi vedere tutti i video del progetto grazie a link che trovi in descrizione
@ettoredicarlo16792 жыл бұрын
Ottima manualita’ Vilson , complimenti. Pero sono un po’ perplesso quando ti vedo prendere i pezzi all’inizio lavoro senza supporto ..... o contropunta visto che sporgono dal mandrino in lunghezza piu di 3 volte il diametro del pezzo stesso........alquanto pericoloso direi. Bel lavoro comunque.
@VilsonAlba2 жыл бұрын
grazie :) no, ti assicuro che non è pericolosa quella sporgenza, il pezzo è massiccio e tiene benissimo. Sarebbe stato pericoloso se il diametro del pezzo fosse stato 30 mm o meno...
@danshepler99332 жыл бұрын
A wood splitter
@greavous932 жыл бұрын
that would be my guess too. Now I want pizza.
@VilsonAlba2 жыл бұрын
ciao ragazzi :) in descrizione trovate tutti i video del progetto che sto facendo
@wallywest92573 ай бұрын
2:43 me and my gf tonight
@DrHarryT2 жыл бұрын
The title and everything else is in English and then I get to 7:30 to find out it is in Italian with no English subtitles. This is not right. [Another commenter did not know what it is and I agree since there is no indication and I can't understand the talking to see if it is revealed. I however did speculate thinking it would work rotating on a shaft as a wood grabber or splitter. Thanks anyway.
@VilsonAlba2 жыл бұрын
ciao :) puoi attivare i sottotitoli in questo modo: kzbin.info/www/bejne/eXjQk4B_eddnbdk
@DrHarryT2 жыл бұрын
@@VilsonAlba It works but the auto-translation is very bad and broken English. It would be better if you could add your own translation that has clear proper English. Otherwise, put the title in Italian and avoid Western audiences. [Australian, British/English and American/Canadian]
@lionelbousfield56592 жыл бұрын
Made an awful lot of brass filings !
@VilsonAlba2 жыл бұрын
non è ottone ma ferro
@clist94062 жыл бұрын
That’s going to hurt when you sit on it
@VilsonAlba2 жыл бұрын
non mi devo sedere sopra :)
@SoupyOatmeal2 жыл бұрын
Another GD 1920 no talkey video. Oh by the way the music was to loud.
@VilsonAlba2 жыл бұрын
ok, la versione no musica è disponibile sul mio canale :)
@mrafard2 жыл бұрын
grazi ragazza
@VilsonAlba2 жыл бұрын
grazie a te :)
@tracylemme13752 жыл бұрын
seeing the chuck key in the socket of the chuck without your hand on it just scares the crap out of me. ALWAYS take it out. WHENEVER IT IS IN THE CHUCK YOUR HAND MUST BE ON IT. I have seen serious injuries caused by the spindle starting wit the chuck key in the chuck
@VilsonAlba2 жыл бұрын
ciao :) grazie per il suggerimento, purtroppo per fare le riprese video ho bisogno di lasciare la chiave dentro
@marbleman522 жыл бұрын
Tracy Lemme...Yes, I agree. I operated a manual metal cutting lathe for almost 20 years and that is how I taught myself. I wasn't "perfect" about it but darn near "perfect". My chuck key's home was on top of the lathe, above the motor and pulley housing. If it wasn't there, it was in my hands opening or closing the spindle. In my 20 years, I must have opened & closed the spindle jaws hundreds of thousands of times. I did a lot of mass production of parts and I will confess that when it would take less than 10 seconds to open the spindle, take out the part and put another part in and tighten the jaws, and I had many hundreds of the same part to do, that I would sometimes just leave the chuck in the jaw. I knew that doing that was not the safest thing to do, but I did it anyway. And once...just once...I got distracted and forgot to take the chuck key out of the jaw and pushed the on button. The key slammed onto the floor and went sliding across the shop floor. That really scared me. Thankfully, I was not standing in the path or I would have been really hurt. No one else was in that part of the shop so that was a huge relief. I think that from then on, whenever I opened the jaws, I took the few extra seconds to take the key out and put it on it's home spot, even though in just a few more seconds I would be reaching for the key to tighten the jaws. Yep, just like you said, Tracy...my chuck key was supposed to be either in my hands or at home spot.
@ВикторТокарев-о6ъ2 жыл бұрын
👍
@VilsonAlba2 жыл бұрын
:)
@ericstark76392 жыл бұрын
If you put the piece in a 4 jaw you wouldn't have to take such small cuts. Take your apron off honey haha.
@VilsonAlba2 жыл бұрын
non ho il grembiule hahahha
@MrMondaniels2 жыл бұрын
👉👍
@VilsonAlba2 жыл бұрын
:)
@MAsWorld12 жыл бұрын
What the hell is it 🤷🏻♂️
@VilsonAlba2 жыл бұрын
è un cono spaccalegna, puoi vedere i video del progetto con i link in descrizione
@rbvenice2 жыл бұрын
Nooo, la musichetta nooo...
@VilsonAlba2 жыл бұрын
hahahahahaha :)
@FairladyS1302 жыл бұрын
Enough of the 'music', lathe sound too hard to do?
@VilsonAlba2 жыл бұрын
mi piace la musica :)
@furburger97822 жыл бұрын
I don't understand a damn word you're sayin ..!..😁..!..
@VilsonAlba2 жыл бұрын
attiva i sottotitoli: kzbin.info/www/bejne/eXjQk4B_eddnbdk