Do you still struggle with perfect joints? You need to see this URGENTLY!

[@WillWoodDiywoodworking]

✅✅ Make 16,000 Projects With Step By Step Plans ...even if you don't have a large workshop or expensive tools! ➡ Get instant access to 16,000 projects now bit.ly/16000Plans-Projects ✅✅ How to launch your own Woodworking Business for under $1000 and Make until $150,000 a yers. ➡Step-by-step guide bit.ly/woodprofits-joineryforbeginners Our channel intends to always bring the best content about woodworking for beginners, as well as DIY and craft ideas. We do our best to have new videos weekly. So in order not to miss any news, subscribe to our channel, activate the bell to receive all notifications.

[@sapelesteve]

Interesting but what does that have to do with making a perfect "Joint"? The wood is already joined. All you are doing is adding an embellishment to the joint. 🤔🤔

[@skippylippy547]

I don't know about you but I've found that my work greatly improves by the quality of the jigs I use. If I can gain better control, accuracy, and precision I usually get better results. How about you?

[@WillWoodDiywoodworking]

Thank you for watching and leaving your comment 😉👍🙏

[@utoobuser206]

What you say is true but, it does add immensely to the apeal and value of a just meh' box , thus doubling it's value

[@davidborn2409]

Its just a hook and line a lot of you tubers are falsely advertising their videos.

[@Ro2_Mi]

At least he replies & acknowledges for watching his videos😂😂😂😂 and he has lots of loving & supportive neighbours in the comment section😉

[@wolverine1694]

I made a jig a while back... but I admit I like yours better... thanks and God bless

[@Creatorhandle-lc]

Menambah pengetahuan trimkasih.

[@WillWoodDiywoodworking]

Thank you for watching and leaving your comment 😉👍🙏

[@miteytuff1]

Clever idea. Works great. Nice job.

[@MCsCreations]

Excelente jig, Will! Fantástico trabalho! 😃 Abraços e se mantenha seguro aí com sua família! 🖖😊

[@WillWoodDiywoodworking]

Obrigado meu amigo! Tenha uma ótima semana. Cuide-se bem 😉👍🙏

[@contezelig]

The difficult part is not even showed.....how to do perfect dovetails stick

[@09FLTRMM77]

MM77 Approved 👍🏼👍🏼

[@WillWoodDiywoodworking]

Thanks for watching my friend 😉👍🙏

[@useyourmind4405]

I like the idea. Usually use a big on the table saw for splines, so will give this a shot

[@ferdinandbasques7715]

SUPER IDEE... BELLE REALISATION... QUELLE IMAGINATION.. FELICITATIONS / TRES BEAU TRAVAIL👍👍👍...👏👏👏...🙏🙏🙏.UN BRICOLEUR MARSEILLAIS.

[@carloscesar4987]

Bonito efeito! Parabéns por compartilhar esse jig.

[@WillWoodDiywoodworking]

Valeu Carlos, obrigado por assistir e deixar seu comentário 😉👍🙏

[@hamiltonoliveira3860]

Saudações ! Muito legal o Jig,. Agrega valor e dá um charme à uma simples caixa. Que o ETERNO continue derramando bênçãos sobre tua Arte !

[@WillWoodDiywoodworking]

Obrigado Hamilton! Deus abençoe sempre sua vida 🙏🙏

[@billmorash3322]

"Do you still struggle with perfect joints?": No. I'm sixty five. I have no perfect joints. I struggle with imperfect joints. (except the ones I roll)

[@jimrosson6702]

Great idea

[@flashwashington2735]

Thanks.

[@WillWoodDiywoodworking]

👍😉🙏

[@TDuySculptures]

This video give me chill!

[@klashnacovak47]

Did it, Did it really?

[@WMKW]

فكره جميله جدا تسلم ايدك

[@steviebye1]

nice jig. how did you make the pieces that went in the holes you cut.

[@gregcorrell396]

Pretty cool but don’t see what it had to do with perfect joints

[@WillWoodDiywoodworking]

Hi! Thanks for watching 😉👍🙏

[@skippylippy547]

The idea is that the better control you have over your tools the better the outcome.

[@luisadrianomeusparabens6863]

Top parabéns

[@WillWoodDiywoodworking]

😉👍🙏

[@firetongue444]

Legal. Campinas SP 10/09/23

[@VladimirLavrinenko]

хорошая работа

[@remolabarca56]

Bell'idea, consente di fare la coda di rondine che al banco sega non si può fare, almeno non con la stessa faciltà. Però le spine trapezoidali come le hai fatte ?

[@lesterdelacruz5088]

I would change the design to make the stand a corner clamp. So it really is creating joints not adding emblems

[@larsmaldonado3838]

How did you cut the splints for the joints?

[@robertgeorgemiller278]

Slight detail ignored - cutting the dovetail splines !!! Which miraculously fit perfectly.

[@AgroFantiRenanFanticelli]

Show de efeito 😉👋👋👋👋👋

[@WillWoodDiywoodworking]

😉👍🙏valeu amigo! Obrigado por assistir e deixar seu comentário

[@ZOEng99]

Title is absurd. “Corner spline placement cutting jig”. I use a similar jig, but on the table saw. No tear out like router causes. Much cleaner.

[@stefrêvedelibertée369]

👍🏻👍🏻

[@WillWoodDiywoodworking]

😉👍🙏

[@warrengilmer8235]

stopped the video as soon as I realized there was no narration or dialog KZbin needs a separate section for silent films, or to just ban them outright

[@МихаилПодболоцкий-н2г]

Где информация о суставах ?😢

[@hablemostorah3086]

Your "jig" won't even sit square to the box you made...

[@GinoGenero]

I noticed this too but for the way it's being used, a perfect 45° doesn't seem absolutely necessary, I suppose. Would be better to clamp to a 90° corner wide enough to align both legs simultaneously during glue up.

[@tukangkayutaryosidomulyo3503]

🙏👍👍👍❤️

[@WillWoodDiywoodworking]

Thanks for watching 😉👍

[@Ro2_Mi]

What was the video really about?

[@WMKW]

انا عندي قناه ممكن استازنك تشوفها

[@bwilliams77ful]

There are far easier ways to do splines

[@skippylippy547]

Wonderful video. You've inspired me to make this jig. Thank you WillWood.

[@WillWoodDiywoodworking]

Thanks for watching my friend 😉👍🙏

[@klashnacovak47]

Clickbaity and nothing to do with jointing.

[@scottmaclean1455]

kind click bait their, all your joints were spot to begin with dont see how your jig helped you make any of box joints only help fit dovetail ties to edges

[@jeromeroddy4931]

Way too much time on your hands! Stop wasting time and money on wood and buy a dovetail jig, you can even use the router bit you’ve got.

[@josipsalaic5246]

Translation is awfull. In Croation this video name is something like: you still have fight with your perfect articulus?!?

[@dingo3718]

Me likey.

[@HoferAdam-xz9xz]

Des is ned schlaecht.

[@ferdinandbasques7715]

TRES BELLE REALISATION TRES BEAU TRAVAIL BELLES PRISES DE VUES FELICITATIONS.👍👍👍👏👏👏🙏🙏🙏 UN BRICOLEUR MARSEILLAIS

[@WillWoodDiywoodworking]

Thank you for watching and leaving your comment 😉👍🙏