Doctor Corally - How to clean and oil the differential in 1:8 scale car

[@rj_gaming9007]

Why at such a weird angle would be nice to see what screws are being undone etc.

[@leeson77]

When I put diff oil in mine for the first time I noticed that they a 1/3 had grease on the outside of the diff cup. Should greasing the outside be part of the maintainance and if so what grease needs to be used ? Also it would be great to have a video highlighting common areas which need to be oiled / grease please.

[@ELValenin]

you need to fill Differentail oil (your preferred thickness, I like 20k rear200kmiddle 50k front) INTO the differential (the part that was disassembled here) And put grease on the outside of the differetial (Only front and rear, not in the middle!) where the big gear is. you can use all purpose grease if you want, or search for a better option online. I use all purpose grease or bearing grease.

[@nicolaswosny6914]

I love team corally !

[@DB-Lackaufbereitung]

How to release the parts from the bevel gear, was unfortunately not shown here.

[@TeamCorally]

Hey. Check one-page manuals video series from Asuga! Very detailed instructions, available also as PDF for Asuga, Kagama, Spark and Syncro4

[@DB-Lackaufbereitung]

Thx. Found it in the exploded view 👍🏼@TeamCorally

[@cybron7089]

The differentials come from factory only with some grease in it ... no oil ... I am disappointed. For this reason, if you purchase a RTR model you have to clean the diffs and fill the fitting oil in.

[@SargeScum]

Common stuff with RTR's

[@BASSstarlet]

@@SargeScum Yeah..thats a bit frustrating.

[@jbf813]

Is this true with the shogun xp as well? I just bought one and trying to find any info on what needs to be done before I run the car. I read the whole manual and it didn't say anything about having to add oil to the differentials. Thanks

[@cybron7089]

I would always check, if the screws are tightened, screws in metal should get locktite. The diffs should be checked also: means you ahould open the diffs and see for yourself whats in there and fill in the correct diff oil. The shogun is an rc that you didnt assemble yourself, so check the rc to be sure that all is ok.

[@masxutesno]

my spacers bends reinstalling the differential . did i have any problems whitout them?

[@TeamCorally]

They are important, as the gap between the gears must be right. You set it up by those washers. If it's too loose the gears may broke.

[@masxutesno]

@@TeamCorally ty. I already made it. Not so difficult after all.

[@aaronratliff1260]

Can u tell me why my muraco is making a grinding noise and acts as if it is slipping when I accelerate

[@TeamCorally]

Hey write us at support.corally.com - something is not right.

[@Bearfight]

How often should diff maintenance be completed? I've only had my python for a week and the center diff had a grinding scratching noise and I noticed the car would not move. I took it home and removed the rear and center diff to find the center diff had no fluid and the rear was about 1/4 full of fluid. Teeth on the gears are not stripped or damaged in anyway, what could have caused this issue?

[@TeamCorally]

Please check the center diff. When you do very often a wheelie, the diff heats up too much when no oil is inside. The frequency of maintenance depends on the driving style. Also when you use new gaskets when doing maintenance, then the diff oil will stay much longer in the diff cases.

[@ELValenin]

@@TeamCorally why is there just grease from factory??? please fix that!!

[@hobbyheadz3613]

Need better step by step video on how to remove them

[@chadkyletheman41]

If you can’t follow this, you shouldn’t bother with the hobby.

[@hobbyheadz3613]

Chad Kyletheman you’re amazing

[@chadkyletheman41]

Lary RC Correct!

[@johnfavors3852]

It wasn’t no oil in my diffs.....seriously they where empty

[@Nathan-qt2zi]

That's the same problem with a lot of people as well

[@blackpanter8795]

no no 20.000 front 50.000 center and 10.000 rear is better standaard is 100.000 center