U are one great engineer... Im an automotive engineer... But still suck at this stuff... Thnx for all the video
@doctormosfet5 жыл бұрын
Thanks ;)
@theheck1238 жыл бұрын
that's some good insight. ill try it on my 410.3. pushing the front arms forward also increase your wheels base, hence moved the center of gravity back a little as well.
@FPVDiverBomber2 ай бұрын
Just got a almost new 410.3 and it nose dive terrible,,, I hope this fixes it, thanks, subscribed
@erikeggenbakstad6 жыл бұрын
Hey! Wow! In the start I did not find any others with the same problem or issues when searching the net. (Mid 2015) but when going trough my very few videos on YT, I got linked to your video. And it is as you described, my Tekno Truck do hard noise dives on every jump. Even with or without throttle to compensate as we do to with buggies, right? So, I built the truck as spec setup and tested. Nosedive, then did the usual thing, as you said by adjusting oil weights and springs as this is 'usually' the culprit. No luck, then went in to the balance of the truck and everything was ok. I even moved battery back by removing tray and just taping battery the the chassis. No luck. I even though the new body was causing lift, so that got drilled like a swiss cheese lol. No luck. Then contacting Tekno. That had some ideas. But as far I remember (almost 3 years ago) that did not help either. I think they really did not test the truck enough before went for the Tekno 410 v.1.0 at all. Anyway, seeing your video is making this hopeful again. But honestly should be explained better by Tekno. That aside, truck is awesome. If I can get it to work. With your inputs I think this is possible! Here is my short video of my issues on my channel, made for Tekno to review back in August 2015: kzbin.info/www/bejne/i3OkeJd6oLChe7c Thumbs up and subbed! Thank you!
@superdutysandsilver50397 жыл бұрын
Good video and explanation. I made the YT video about the battery mod. It was a bandaid. But, I'm glad to see another option. I will most definitely try it! I have played around with the pills, but never for arm sweep. Thanks for sharing.
@hometownguy71848 жыл бұрын
mind blown!...you must be a engineer?your vids are great!much appreciated
@doctormosfet8 жыл бұрын
Thanks! Yes, I am an engineer.
@fanboy438 жыл бұрын
Great! Can you explain why 2wd RC have more kick up than 4wd? usually 2wd front have about 45° kick up, but 4wd just have little kick up.
@doctormosfet8 жыл бұрын
2wd cars typically have 25deg or 30deg of kick up. 4wd cars have a similar amount, although the execution may be different - rather than bending the chassis nose, it may be done at the inner hinge pin mounts.
@wheels.and.wrenches7 жыл бұрын
Fan Boy 45 degree kick up eh?? lmao
@onerINTEGRA8 жыл бұрын
Thanks!! I'm going to try this for cruzin. My b5m is getting better. 👍🏻💯
@207esmeril7 жыл бұрын
Very nice explanation man!
@copiercer4 жыл бұрын
Great explanation... !!
@louisdevito24718 жыл бұрын
Very helpful, thank you!
@LuisLopez-ed7oc4 жыл бұрын
Balance all 4 corners make sure all 4 side weigh the same. They sell scales for this..that way it flys straight
@dustinamaral93088 жыл бұрын
got a quick question for ya... i remember in a prior video u were running the pro 4 4000 kv motor...that motor your running now is it the tekin 550 sc4x redline???? ive been running the pro 4 4000 on indoor tracks and the pro 4 4600 on bigger out door tracks...if that is the the tekin 550 sc4x redline whats ur thoughts on it and how do u like it???? i just picked one up 4.5 turn and was curious
@doctormosfet8 жыл бұрын
My Tekin Pro4 seized up, due to the rotor falling apart. That's actually the second time that happened. It seized up once, then I bought a replacement rotor, then it seized up again. The motor in there now is my backup motor, a Turnigy Trackstar 550, I think a 4.5T motor, with a 13T pinion. I'm not too picky about motors, so for me, this motor is great, especially considering how it's so much cheaper than the big name brand motors.
@waynerc24207 жыл бұрын
C is bottom left hand corner d is bottom right hand corner
@thibaultbloch50015 жыл бұрын
Could you give me your opinion on the following: can a SCT, more specifically the 410.3, be controlled mid-air during a big jump, so as to cause radical changes in the car pitch, as is possible with a buggy? In SCT videos I've watched, most of the jump physics seem to be determined during the approach and launch, with very limited control available after that, whereas a buggy driver is able to completely control the flight (radical mid-air pitch changes, flips, backflips, etc) using throttle control. Can you do that with a properly tuned SCT? To the same extent? Thanks! Bonus points if you can point me to a SCT410 video demonstrating the aforementioned ability!
@doctormosfet5 жыл бұрын
You can, yes. SCT just has larger mass and therefore more polar moment of inertia, so it will take more torque to achieve the same effect. This is actually rather necessary with trucks like the SCT 410.3 that tend to nose dive off of jumps due to the nose hitting the jump face. You can try looking at some of my racing videos with this truck and maybe you'll see some mid-air adjustment there. I assure you, though, it is very possible, and I've seen plenty of it on tracks with large jumps.
@thibaultbloch50015 жыл бұрын
@@doctormosfet Thanks man, much appreciated!
@cwinsor30857 жыл бұрын
Thanks for this info. Which one do you have in the rear? My kit didn't have the stock hinge pin adjustment with the dot in the inside lower corner. I currently have the center dot in the rear, what do you recommend?
@doctormosfet7 жыл бұрын
Rear inserts are stock.
@weedsnager8 жыл бұрын
What inserts are you using in the "B" block ?
@doctormosfet8 жыл бұрын
All stock inserts, except the front insert as described in the video.
@backbayhound563 Жыл бұрын
Old video and not really the topic covered but if someone was setting up a new SCT (or any new RC car) and wanted reliable, long-term, set-it-and-forget-it performance, what electronics would you recommend? Is there a Toyota equivalent in the world of RC electronics? Motor, ESC, batteries, charger, servo, transmitter; all of it.
@doctormosfet Жыл бұрын
My favorite servos are made by Hitec. I have found them to be very reliable. Although I use a Tekin RX8 in my SCT and EB48SL, generally Tekin does not have the reliability record of others (at least in my experience with their motors, and I've had one of their ESCs go bad). Hobbywing makes a good ESC for this application, but I can't speak to its reliability. For the motor, a lot of times I just throw a Turnigy motor in there because they're so cheap, and I haven't had one go bad on me. Transmitter...I'm a Sanwa/Airtronics guy. I still use the same Super Exzes Plus I've had for over 10 years.
@backbayhound563 Жыл бұрын
@@doctormosfet Thanks for that. Hitec 7950 comes up a lot in forum posts. Savox is popular in local shops. Futaba used to sell a kit that included transmitter, receiver, servo, and ESC which was nice for its all-in-one simplicity. That was about the time vintage RC was new. It seems like there was a move to a la carte electronics at some point with a ton of new options and names.
@rcaddictgarage3 жыл бұрын
I have a question??? Was there a sct410.2 made? Or did they just jump from Sct410 to Sct410.3??
@doctormosfet3 жыл бұрын
To my recollection, there was a 410.2.
@rcaddictgarage3 жыл бұрын
@@doctormosfet OK Thanks for the response man!! Saved me a bunch of time in research.. Picking up a gen 1 for a steal of a deal!!
@rycam4184187 жыл бұрын
Have you had any issues with the rear being loose on power? I know that's the other big issue with this truck. For me indoor on clay coming out of a long straight and then in summer on outdoor loose dirt going in and coming out of a straight into a sweeper. Tried many spring setups. Still have issues.
@doctormosfet7 жыл бұрын
I have not had issues with the rear being loose on power. My setup is mostly stock, with some change in the front pivot blocks and a thicker shock oil (40wt all around), and that's about it. If you find that, on your particular surface, your truck is loose on power, then it could be for two reasons. The first is that your rear suspension could be too stiff (springs, oil, etc.). The second is that you could be running too much rear camber gain (i.e., rear camber links too short). As you apply power, weight transfers to the rear and the car squats down. This causes the wheels to camber inward. With more camber gain, this effect is pronounced and you end up with less rear tire contact patch with the track surface on power. If you lengthen the rear camber links (less camber gain), you'll reduce this effect and the truck will have more rear grip on power. There are other things you can fiddle with (anti-squat, downtravel limiters, etc.), but camber gain is the first thing to look at with this problem you're having. Go back to a completely stock setup (this should be your baseline) and see how it feels. Then lengthen the rear camber links and see how it feels again.
@doctormosfet7 жыл бұрын
I should add that, if the suspension is stiffer, and/or if you have more anti-squat, then the rear will squat less on power and you can run a shorter camber link for the same amount of forward bite. However, if the suspension is too stiff, then the total acceleration force applied to the tires will exceed the grip limit, whereas a softer suspension will absorb some of that force. You want to run the suspension at a stiffness that does not exceed the grip limit of your tires (by transferring too much force to the tires).
@waynerc24207 жыл бұрын
What is pill in b is it bottom left hand and right corner or middle bottom
@papocordova7177 жыл бұрын
Can you tell me what pinion gear you are running. Also, what final motor did you end up with your 410.3? Thanks, Papo
@doctormosfet7 жыл бұрын
Turnigy Trackstar 550/4.5T with 13T pinion.
@wheels.and.wrenches7 жыл бұрын
Papo Cordova Most people run a 16 or 17 tooth pinion with a 4300kv motor or higher. With a 4000kv motor you may want an 18. The smallest you would ever need is 15 and the largest is 18. i run a 16
@cwinsor30857 жыл бұрын
What inserts are you using in the rear for the hinge pins? I currently have the one with dot in the center. Still building truck just got it yesterday. My kit was missing the stock pill for one side.
@fondfarewell28 жыл бұрын
I thought that having a stiffer rear spring would help from nose diving, preventing the rear from slapping when hitting a jump and bucking the rear up while coming off the jump?
@doctormosfet8 жыл бұрын
Yes, that can happen as well. I noticed more wear at the front of the chassis than the rear, though, so in this case I think it was the front that was dragging.
@fondfarewell28 жыл бұрын
ahh i see. your videos have helped me understand things much better, especially the bumpsteer and ackerman video, thanks man keep up the great work.
@doctormosfet8 жыл бұрын
Thanks. Glad you're getting something out of it ;)
@rycam4184187 жыл бұрын
This is where I was going with my question above. Stiffer springs helped the nose dive for me by reducing the rear chassis slap but the trade off is less rear traction on power. I've tried everything and still can't get it.
@johnnyyakoobian98887 жыл бұрын
I've have tried your idea with the front inserts.and I still have noise diving issuses.im running droop 105 front 118rear.would that be a issuse.
@doctormosfet7 жыл бұрын
Increase your front droop.
@papocordova7177 жыл бұрын
Have another question: what wheels are you using on your SCT410.3. Thanks.
@doctormosfet7 жыл бұрын
These wheels are for the Losi SCTE.
@papocordova7177 жыл бұрын
Thank you.
@tonyallen86265 жыл бұрын
is sweep similar to toe in and toe out, I thought those inserts were for changing toe
@doctormosfet5 жыл бұрын
Sweep will affect toe, but it also changes the arm's geometry as it's happening at the inner hinge pin rather than at the outer hub.
@rcpilot15653 жыл бұрын
@@doctormosfet, The 'sweep' that you're talking about with the lower control arm is...'Castor" +/- forward and back. "Camber" +/- is the top of the wheel, left/right and "toe-in/out is the front of the wheel left/right.
@JDsSportsRoom6 жыл бұрын
What pills in B block?
@papocordova7177 жыл бұрын
Can you share if you have a setup sheet for your SCT410.3. Thanks and Happy Thanksgiving.
@doctormosfet7 жыл бұрын
I do not, but it's very close to stock. 40wt oil and what I described in the video. I don't remember the ride height, but I remember it being on the higher side to get clearance over jumps. I'd like to play around with dropping that and putting in more front arm sweep.
@wheels.and.wrenches7 жыл бұрын
the stock set up is REALLY bad. i have a set up I've won multiple championships with, but I cannot post it here
@papocordova7177 жыл бұрын
Any ideas on how I can receive your copy?
@doctormosfet7 жыл бұрын
Most successful drivers publish their setups on petitrc.com. They're usually the first site to show up if you google search for setup sheets on a particular chassis.
@papocordova7177 жыл бұрын
Thanks, very helpful.
@gixxerrick20028 жыл бұрын
does addin more front kick up help this
@doctormosfet8 жыл бұрын
I'm not sure. I think adding kick up will allow the front arms to compress more on the jump face, increasing the chance that the nose will drag. So you may end up wanting less kick up.
@stokedGSXR2 жыл бұрын
Did this solution end up working out well?
@doctormosfet2 жыл бұрын
It has been a few years since I last raced this truck, but yes, for the time it did make a difference.
@stokedGSXR2 жыл бұрын
@@doctormosfet thanks for the follow up, even after all this time!
@radiocontrolledmadness81192 жыл бұрын
What brand tires ?
@doctormosfet2 жыл бұрын
I'm usually on ProLine tires (at least when I get to race, which is not often these days).
@vanceandrew90037 жыл бұрын
What tires are you running?
@doctormosfet7 жыл бұрын
I think those were M3 Bow Ties. Can't remember, though.
@vanceandrew90037 жыл бұрын
doctormosfet thanks, I really like your videos
@doctormosfet7 жыл бұрын
No problem, and thanks!
@waynerc24207 жыл бұрын
Truck drive good change pills in c and d block
@camilo8cheryl7 жыл бұрын
what pills are you using on C & D block??
@wheels.and.wrenches7 жыл бұрын
the nose definitely doesn't drag the jump faces. lol
@doctormosfet7 жыл бұрын
Uh, yes it does. lol
@rcjoe4064 жыл бұрын
If you gas it before a jump it will fly straight every time your welcome