Dodge camper pickup ABANDONED 25 years. Will it run and drive ?

Pick your JS2000 jumpstarter up on Amazon here
www.amazon.com...
Pick up your artilink 500b diagnostic tool on Amazon here
amzn.to/3R5CmBZ
Dates of reduced price are Nov 20th-26th
In this video I buy a 1973 dodge camper 7500 adventurer sport with a big block in it that hasn’t ran since 1998. Can we get it road worthy again? Well find out today
become a channel member and get cool perks, click this link to check it out!⬇️
/ @theetravisb
Send dad and me junk to our P.O. Box
P.O. Box 1772
Cortaro, Az
85652-1772
Business inquiries and if you have an abandoned vehicle you think dad and me might be interested in email us here
[e-mail]
Interested in pre 1980 abandoned cars or trucks/ barn finds. (Not interested in foreign cars) and 1st and 2nd gen Cummins (89-98) diesels only

[@theetravisb]

Thank you guys for watching and happy thanksgiving to you all. Pick your JS2000 jumpstarter up on Amazon here www.amazon.com/dp/B09GLPBKXR/ref=cm_sw_r_as_gl_api_gl_i_R8EC14SZDZR16XBZFN50?linkCode=ml2&tag=theetravisb05-20 Pick up your artilink 500b diagnostic tool on Amazon here amzn.to/3R5CmBZ Dates of reduced price are Nov 20th-26th

[@blakevella2762]

Im really keen to see how good it comes up with a polish!

[@danclancy6535]

Keep your eyes open for a 8ft Stepside box for my 1972 D-100 ..Thx !

[@geesss8675]

The price is not what you indicated on the jump box. Please let me know. It shows $85.98

[@jimzerner5229]

Take off running boards!!!

[@jundialhaqiqa9907]

I think it is awesome that your Dad is always there helping you out when you need it.

[@theetravisb]

Yeah. He’s great we’ve always worked together.

[@newton366]

That "Fuel efficiency gauge" is essentially a vacuum gauge The higher you can keep the gauge reading the better gas mileage

[@Boga217]

Yes sir, I was looking for this comment.

[@williesweetjr8713]

The more you put your foot in the go pedal, the lower the needle will register. The tach appears to be a Sunpro mini and the vaccum guage is likely an add on. The shop I worked in in the early 80's had one and I don't recall that guage in the dash.@@Boga217

[@terrytate6006]

Every Pep Boys store had those gauges back in the day

[@ABetterLifeInc]

So how accurate were they?

[@upscaleshack]

@@ABetterLifeInc Well they're perfectly accurate at measuring manifold vacuum, which is what they do. Engines have highest vacuum at idle, so clearly any RPM above idle will mean less mpg, but we can't really drive around at idle.

[@richardthomas1743]

WOW! I am surprised that the Engine came back to life on this one. Good job!

[@pclayton5063]

Can't believe you got that engine to run. That's determination. That paint might be able to be saved with a proper buff. Great job!

[@JeffKopis]

Why wouldn't you believe it? It's a Mopar. For TRUE miracle saves, check out Jennings Motorsports! He revives locked up flatheads that have been sitting for 60 years!

[@oogboog7049]

Most carbureted V8s come back to life after sitting sometimes they need work but most the time they don’t need major work

[@Kevin_D1]

I really like seeing you and your father working together. Makes me miss my father. Keep up the great work!

[@patrickrooney5130]

I love seeing the old cars being put back on the road we're they belong. Good job guys. It's lovely to see you're dad working alongside ot you to. I bet he's old school. Good luck with what ever you do next guys.

[@theetravisb]

Very old school

[@slicksiderepairllc2822]

Your dad sounds like Sam Elliott. I like these old dodges. 🤘

[@joseesparza2364]

To answer your dads question about the Thermoquad, it was not originally designed for Mopar. The thermoquad was originally designed by Carter in '66 or '67 to be a direct replacement for the Rochester Quadrajet equiped on GM engines. It solved the problems of full throttle starvation and vapor lock on the Quadrajet due to the location and size of its fuel bowl. That was also the idea of the center being plastic so it would disperse the heat. They are great carburetors, but you absolutely can not let them sit or they get brittle.

[@richardbates2367]

Buick, Pontiac and Cadillac cars especially and of course your BBC vehicles were having running out of fuel at full throttle and the aforementioned Buick, Pontiac and Cadillac and the Oldsmobile motors are a wide setup with plenty of steel and iron mass and would constantly just boil fuel... and whether people believe it or not the Rochester quadrajet carburetor is also a Carter designed carburetor

[@blackbuttecruizr]

Love your content! You and your dad should wear respirators when cleaning out mice infested rigs. Breathing that stuff in is a recipe for a lung infection or worse. My family drove an extended cab version of this same truck round trip from the Dallas area to Oregon and back several times. The 400 gave up the ghost on us in Arizona, so we got towed to a junkyard where he proceeded to swap it out for a 440 out of an older Dodge truck. What a memory.

[@Brock_Landers]

Like another commenter said below, I can't believe that y'all took that locked up rusted out engine and made it run! Good work guys!

[@watchman11000]

You guys rocked it with that recovery. I recommend hammerite that floor after metal repair to seal it. I did that to my ‘79 k5 blazer and it worked like a charm, even sealed up the pin holes. Dries like a hard thick plastic coating.

[@hotwizard6487]

Thanks Travis for the heads up on the jump start box. I have been in the market for one for a number of years. I saw what you did with the batteries and then having no battery. I just hope it stands the test of time. The price was definitely right. Got it for $75 off the Amazon and The Amazon is claiming it will be here as soon as tomorrow. Thanks again Travis for the heads up on this!

[@theetravisb]

👍🏻👍🏻 hope it works good for you

[@atariforever2002]

Dude! Excellent find! That thing looks fabulous. No rust or damage, just amazing. Can't wait to see what you do with this.

[@jasonwatzka702]

I really enjoy your videos- especially seeing you and your dad working together. Cherish that. My dad and I used to work together on our cars and he has dementia now. Im so glad we had that time and the conversations that went with it

[@theetravisb]

Thanks for sharing that.

[@kevincopinger9630]

Really enjoyed this video. I couldn't help thinking with a decent camper interior, both fuel tanks up & running, u could put a tow hitch on it & use it 2 go get projects with! Might save u on hotel costs. I think it's time u did another fly & drive, I love watching u do those! Keep up the fantastic work, much love from Scotland!!

[@theetravisb]

I’m always looking for them. Hard to find good ones

[@steeliewheelies]

Right on I’m glad these cars are going to good homes! Sad to see the Impala go of course but you can’t keep them all. Not without greater sacrifices anyways. I think it is so cool that the truck is going from subscriber to subscriber. Got a groovy thing goin here. The dodge is great, for how nasty the engine was it sure runs great, especially with that REALLY nice carb your dad so generously gave up & sold to you (lol)

[@theetravisb]

Yeah that carb helped out a lot needed it in a pinch

[@terryeustice5399]

That man sold this thinking it was a basketball case. I may have thought that as well. Travis you and your dad make a great team. You guys are Mopar ready. Think after a little clean up. Got another good flip. Thank you for sharing. And have a great Thanksgiving! 💯👍👊

[@theetravisb]

Happy thanksgiving 👍🏻👍🏻

[@troy9616]

An hour and half spent with Rick and Travis is always fun to watch. 15:40 - that is not a factory gauge. You can see the DIY hole saw marks. 35:56 - Rick, “Yea, she’s thirsty.” Love it. Man from my own heart. Hey Rick, that’s good running carburetor. Lol

[@djsi38t]

really fun to watch.I think I like the fact that you are more of the home diy kind of guy getting stuff done with what you have rather than having a loaded garage with every tool under the sun.It's very down to earth.I so wish I could get vehicles like this but being in Maine,everything is a god damn rust bucket after 10 years.That fly and drive is in my future for sure.I will have about 20 grand to spend and I am headed south or west to stay for a week and find a car with NO rust.What a dream!..its crazy because the prices are the same for cars with rust in maine or rust free down south..

[@designfabrication512]

did you get a truck yet? I’d look around for you when you’re ready to buy

[@jonathanfreedom1st]

Gosh you are killing me with these finds. I'm a Mopar guy and these things are Astonishing. My jaw is dropped with absolute suprise. What a peice of Art work. I don't care if it runs its that good. You just DO NOT FIND Them here. I've only seen them in Literature or online. Hopefully we see more and more Mopar trucks. No matter the year. Love em all. Cheers from Rusty Belt, Toledo Ohio😅

[@theetravisb]

Yeah the camper specials I don’t see often especially in that good of shape

[@jonathanfreedom1st]

I legit just seen your segment where you said, us Midwestern people are trippin about having no rust. I commented the above before watching this part. 😂😂😂 fkn Rock salt is for the birds. We need a class action lawsuit, sue the state and local governments for all the rust damage 😂

[@jonathanfreedom1st]

Cars and trucks aren't cheap, we get ours dissolved away in the name of safety. Better yet why not place Endorsements on drivers licenses and keep people who don't know how to drive in snow off the roads. 😂 easy for me to say. My Dodge Ram is a plow truck, I do snow removal in the winter. 😂

[@mromatic17]

I daily a 94 f150 4x4 RCSB 5.0 5 speed with 120k and its still in really good condition and theres a little rust around the fenders but if I lived in the rust belt this truck would've been gone like 20 years ago. I'm glad I live in the desert of utah the 2nd dryest state in the country.

[@jonathanfreedom1st]

​@@mromatic17true. My 4x4 360 wasn't a plow rig originally until I got it and even before that it was suffering rust damage from Michigan's lovely salty thru ways and thoroughfares. But I have it nearly rebuilt all the way back to the quad doors and that's just the body. The entire entire and drive train been rebuilt and engine replaced with a remanufacturered 5.9L 5 years ago unfortunately using the shit timing gasket that was included failed. So it's layed up in garage right now for me to replace it before snow hits

[@Cimmerian415]

Travis, helping make Monday mornings great again. 🇺🇲

[@theetravisb]

🇺🇸🇺🇸🇺🇸

[@slyguyaction]

The pickup I grew up around was my dad's 1975 Dodge Adventurer Camper Special. I remember it well. Great pickup and a great video. Thank you.

[@TeIegram_Theetravisb]

Get in contact immediately

[@josephhoward7496]

Nice , I work on old cars and many a time I had to put the old parts back on , I'm sure there is good replacement parts out there but nothing beats the old stuff

[@theetravisb]

I agree

[@robertlacob8831]

Travis, after you showed that nasty belly pan and water in the oil pan, I thought for sure that engine was toast. Boy, was I wrong! Worked on a lot of big block 400 Chrysler from 79-89, they were a low compression emissions engine but always ran great, even in the Lean Burn Models. Very reliable, Our Dodge wrecker D400, I think, had a 440 and that was a great runner. That truck is sweet!

[@JeffKopis]

After sitting so long, the oil pump probably lost its prime. An old trick is to pack the oil pump with VASELINE, and that will prime it again. It'll dissolve in the hot oil. EDIT: Literally 23 seconds later in the video, you said that! 😂 Good on ya!

[@jeepanimal2943]

I was wondering on the effects of the pickup sitting that long with water on it. That screen might have gotten junked up. Back blowing it through the screen merely pushed the crap off the screen, possibly only tempoarily. I, myself, would pull the pan and double check.....

[@That70sChannel]

You do a really good job narrating. You're one of the channels that I use like a radio play when I'm driving. Currently, north of Flagstaff on my way out of the state heading across the State to buy a car that I'm not going to revive and drive but I will go back later to pick up. Somebody just did a will it run video on this car but it needs brakes and probably suspension

[@williamwood7077]

Hey guys, it was great watching your 'complete' video! I love when You-Tubers show the work being done, no matter how simple or hard the task. We the audience, and the ones who have our own project cars/trucks, learn so much from you who make it look so easy because you have done it over and over and have that 'Gold' in experience. Thanks for the quality video! From Will up north in Chandler, AZ!

[@theetravisb]

Appreciate the compliment good to know people notice the hard work. And effort to save a buck

[@lifelong5425]

Excellent on the newest Dodge..It sounds superb. Can't wait to see that buffed out and the details taken care of...

[@jdpinbaytown]

Great Video Travis!, You don't want to drive it without the TV hooked up, It will smoke the Trans!, Also that won't affect 3rd gear, Without it hooked up it will be in 3rd in just a few feet! Lol, Also wandering what ever happened to the 1969 Chrysler?, Thats how I found your Channel!

[@theetravisb]

I sold it a while ago

[@marcusaurelius2770]

He correct about that tv cable. I hope you guys didn't drive it too much.

[@williamkarenschrecengost8408]

Travis , it’s nice to see how you and your dad work together. Keep up the videos, look forward watching them.

[@rodneyprimm5984]

You guys are rocking it,apsolutly magical the knowledge you have together. I never thought this motor would run. Let alone turn over. Love your videos. God Bless 🙏❤️

[@sfcbrick]

Travis, once again, you and your Dad have done an excellent job. Super awesome to each you and your Dad work together!

[@riffraft2584]

Travis. Respectfully congratulations on your marriage. She is adorable!

[@theetravisb]

Thank you

[@aintgotnogasinit]

Let's go! Getting in this comment section nice and early. You're the man Travis. Learning a lot from your channel.

[@theetravisb]

Thank you

[@SaveAmerica-TRUMP2024]

Ok cant hold back anymore. 1 that is a split bench seat, not buckets. 2. that tach is 100% aftermarket. 3. Im 99% sure that efficiency gauge is also aftermarket. 4. That thermoquad is not made of bakelite. Bakelite has not been used since the end of WWII. The thermoquad is made of a phenolic plastic. 5. Chrysler introduced electronic ignition in 1973, chevy did the same 2 years later.

[@ReaperRestorations]

you're totally right about the China parts. i put brand new Moog ball joints on my truck and all 4 were bad right out of the box. they were worse than the 20yr old original ball joints! ruined my tires while i was trying to figure out what the hell the issue was since the whole front end of the truck was rebuilt. last thing you want to believe is that your new parts are junk

[@JeffKopis]

18:20 Thats a Carter Thermoquad. Similar to a Quadrajet, but with a phenolic resin body, which should help reduce vapor lock in the Arizona heat.

[@patrickshaffer2252]

Great job. I love the adventure camper special. My dad had a 1975 4x4 model. Its awesome watching you and your dad working together. Hope to see more.

[@iamrichrocker]

there is something cool about you two..for me, it is my missing my father..and the projects we did together..so folks..never take a day or your loved ones for granted..time is precious..

[@scottjones1497]

I’m not a dodge fan at all BUT I would drive that. Straight up classic. Great find. Those old trucks have really gone up in the last few years.

[@JeffKopis]

37:15 If its a 440 RB (Raised Block), there will be a machined pad on the front drivers side of the block, above the water pump housing. If its a 400 (low deck), the pad will be on the passenger side, under the distributor.

[@theetravisb]

Thanks for the info

[@Jstme303]

If anyone is going revive an old dodge truck this channel is the one to watch.

[@prairiestateautoresto]

You don’t need paper gaskets when doing Mopar RB engines that have 4bbl intake manifolds. The valley pan IS the intake gasket and just needs copper shellac on each side.

[@EasyThereBigFella]

This one certainly made you two earn that 1st start. Sound logic and great attitude in plowing forward. Looking forward to the next video on this truck with potential. Sorry to see the Impala go, as I was hoping you'd bring the paint in line with the El Camino and watch you and your Dad attend car shows with them, as a pair. That said, any subscriber considering purchasing a vehicle from you can be assured of a square deal. Especially with the benefit that they can watch the diagnostics and work performed. Thanks for another great video and Happy Thanksgiving to you and yours!

[@theetravisb]

A good man’s word is worth more than a contract and a gang of lawyers. Happy thanksgiving

[@mtrgv]

Man, I was shocked when I saw the lifter valley exposed due to Rat pee!! Ahhhhhhhhhhhhh. You and your Dad did a great job bringing her back to life! Awesome you found a buyer for the Dodge Camper/Adventurer so quickly. Fantastic display of troubleshooting skills and process's. Now you can find and buy a 1961 bubble top Impala!! with the 348 V8 and 4 speed!!! woooooo hoooooo! Happy Thanksgiving!!

[@soldier4christ111]

Thank you Travis for this restore you and dad so busy you even had time to place the camera under the truck,Well I appreciate that.

[@hasbeengood]

Good show guys! Well done again.

[@BFVgnr]

The mileage gauge looks aftermarket. It doesn't have the little recess like the others, and appears to have a silicone bead around the bezel. But even then, an amazingly complete and solid truck. Very nice

[@remmor669]

Great stuff, as usual! Love seeing the interaction between you and your dad. Thank you for sharing.

[@braxtonnelson5375]

Looks like you need to go to Arizona to get a decent Dodge truck! You and your Dad did a solid job getting this old girl going again... I'm looking forward to future videos on the Camper Special. The paint restoration should make a good episode! Thanks for posting, Travis!

[@hectorpatino7113]

She lives!!! Awesome video to share and spending time with your dad. I laughed when he said I wish I would of known that carb worked that good 🤣

[@edsmachine93]

Nice find for sure. I love these old Dodges. I have a '76 Power Wagon with a 440. Need to wear a mask when doing the inside. Hantavirus is bad news. Stay safe. Just subscribed to your channel. Happy Thanksgiving.

[@theetravisb]

Happy thanksgiving thanks for following along

[@billcar741]

Big block mopar with Carter ThermQuad. awesome find. I had a 400 in my 74 dodge.

[@MajorDan1138]

Awesome truck! That bench seat is so cool! I recommend that you have a shop restore that seat, I think it would be worth the $$!

[@Papaw_Vin]

Dude I love this old truck. It’s straight as an arrow and it’s my year too. Dad had a 76 power wagon the same color when I was a kid. That thing was a horse.

[@MartinRodriguez-ti6cp]

Nice rig , great work keeping these vintage rides alive !!

[@designfabrication512]

Simple straight forward bring em back to life videos. My favorite ones..

[@lonnietaylor2759]

Wonderful to see/hear a father and son working together on something they love doing.😃😎😎😎😎😎

[@kolayotadventures6789]

Beautiful truck just like my old 1991 dodge, great team work, father and son, I’m jealous…. Great job

[@harry7361]

The center of the thermOquad is made of phenolic resin and set up correctly they're fantastically great carbs.

[@TonyBrunos-bs7hu]

Dad and son ❤ Great video thanks for your time good job 👍 peace ☮️

[@williamworthington1284]

Such a nice old truck. My dad retired from Chrysler and I remember him buying a new 1976 Plymouth trailduster. Boy what I would give to have that truck now. The removable hardtop leaked like a sieve right from the factory.

[@brianjohns7699]

Do yourself favor, get a clear piece of hose about foot or longer and a water bottle with a hole in the cap to bleed the breaks. That way you are not making a mess. Nice score on the dodge truck

[@theetravisb]

Actually good idea

[@yogithebear7493]

Thank you for sharing how much you spent on it

[@shaunclifton5281]

Awesome truck ! What a Score ! So super straight and solid. What a needle in a haystack. 👍

[@pizzapapa40]

You have a very nice dad I wish I could have to work on cars & trucks with my dad and you are right I hate overseas crap parts! Have a great thanks giving !

[@TomAndBeth]

I had a 1977 Dodge Adventurer Crew cab back in the day.( I wish I still had it.) It came with the 400 in it. I was told the 400 only I'm in the adventure series, and emergency vehicles. I.e. Ambulance, fire rescue etc.

[@techmarc6996]

Travis, get a roll of 3/8" clear tubing from a hardware store. Drill a hole in an old Brake Fluid Bottle. Attach the tubing to the bottle & the bleeder. Youi'll be able to one man bleed brakes if the tubing is long enough to hold the bottle higher than the bleeder. Gravity will push the air out due to atmosphereic pressure. Takes time, but does work! And zero mess.

[@edrushbrook]

Your Dad is great. Reminds me of working with my sons on their cars. Except I don’t know half of what he knows.

[@thomasarmistead9603]

I like what you have going here. I'm a "Original" Gas Monkey Garage, 20k sub at the time with Vice Grip Garage, Andrew Camatara, KKNH and now your channel. Good one This truck is pretty much unfettered with just over 100k miles with how it sounds. Looking forward to seeing the other fixes you talked about so an early Thks for taking us along. Tom

[@theetravisb]

Thanks for the support Tom

[@itsmephil2255]

An American father and son, working on an American V8 pick up truck How much more American can you be .... Also Travis, your Dad is awesome, a total star ✨

[@theetravisb]

Yeah he’s the man

[@designfabrication512]

What a nice guy that got in touch with you and sold it to you

[@wintonwright4244]

You don't hook up your kick down or as you call it the TV cable even though it's a linkage you will burn that transmission up and what you thought was second was actually 3rd gear without the kickdown on TV 1:21:38 cable you'll be in third gear in about 200 feet

[@jdpinbaytown]

Yep, Lots of folks don't know that about Torqflights, Not like Ford or Chevy where it's just for kickdown, Well Ford's AOD used TV cable/linkage also

[@mikejennings2346]

Wow, up to 130K subscribers already. Your videos are very entertaining and your dad is cool as well. I've been waiting until Black Friday to order another jumpstarter for my 2nd vehicle, now I go ahead and get it.

[@Tyler-ld7bi]

Great video. I really enjoy the father son revival duo. The shot of him sitting on the cement block in the cab made me laugh!

[@TeIegram_Theetravisb]

Get in contact immediately

[@1gatomon]

Today's New master cylinders are crap. I actually got used ones several times when I replaced mine on my 72 Chevy Cheyenne. I started opening up the boxes and checking them because they often resell the returns or used ones in the box.

[@stephensaasen8589]

Honestly, I have limited time and so many You Tube channels I can regularly watch but the canopy shell actually caught my attention. That's the 2nd one of that make of canopy I've ever seen in my nearly 52 years. Way back in 1980, when we lived in the Tacoma, WA area, dad bought a used 1977 Ford F250 with a canopy just like that. The color matched the truck, which was red and white. If it isn't exact, it's awful close. I haven't seen it since about 1986 when dad sold the truck but I remember you could unlatch some pins and raise that whole back end up. It was very versatile. You could even remove the hinge pins, take off the entire back wall and have the back end open. Dad built a wood frame and nailed plywood to it and laid a huge piece of foam rubber wrapped in a blanket on top then set it between the bed rails up front inside so you could have kind of a bed. We took a few camping trips with that. We used to lay across it and ride in the back when that was still legal in all states. The front window was a slider along with the cab window in the truck so you could communicate with the driver while riding in back. That was the neatest thing. Had the paneling inside like yours. Great to see such a familiar sight that I haven't seen in nearly 40 years!

[@theetravisb]

Wow that’s a cool story thank you for sharing that

[@SchnelleKat]

Dang nice rig! she'll clean up good brother. Super looking forward to yous getting the air horn & Interior done up.

[@debbiebermudez5890]

Mr. B. Here ! 🍩☕️👀😎👍. 3 am ET I feel your pain working outdoors ! This truck looks better than some of the others you guys have work on ! The smell must be bad , in the service we would wash disinfected the cab . Am with you guys never seen that , with intake ! ??? Nice job guys . It’s Alive - It’s Alive ! 👍🇺🇸👍🇺🇸👍🇺🇸

[@theetravisb]

Thanks for always commenting ! Yeah always gotta get in some kind of shade.

[@arthuradderley5872]

Good on you and your dad, the quality and detail of your videos are outstanding. Sad to hear the Impala is going but I guess it would absorb a lot of cash to get much further. Has Chris collected his Mustang? Can't wait for the next video 🇬🇧

[@theetravisb]

Yes we sold the mustang

[@magnuscato9770]

Glad to see you’re rebuilding brakes etcetera instead of just throwing new stuff on it.

[@bradhampton6457]

That’s one really nice D200 Camper Special. Glad you were able to bring it back to life. Those rodents sure can be troublesome. But that frame and body on the truck are super nice for a 70s Dodge.

[@tommyjefferson9525]

You guys are going to have that thing purring like a kitten I love watching you and your dad work you guys are awesome together

[@GoatsGarage]

Nice find!! I'll bet it will buff out and look awesome once it's detailed. The 6x9's in the doors still good? That ELO Eldorado album is one of my favorites.

[@JeffKopis]

All BB Mopars have a sheetmetal valley pan under the intake manifold. Edelbrock makes a big deal out of their Air Gap manifolds. Every Mopar BB has a factory air gap.

[@themanchannel8761]

That's a really cool old Mopar! I love that body style. Nice job, fellas!

[@harmorehorń]

Use a brass drift to hammer on those rockers next time, helps not nick or gash the rocker/shaft

[@bobadam7021]

damn your subs are way up. i think i found you under 30k. congratulations, dont change, keep recycling brake fluid and other cost cutting measures. i love that.

[@theetravisb]

Appreciate the support

[@jackperry9369]

Wow man what a sweet truck that is a truck for sure😊 thank you guys for the coverage they don't make them like this no more

[@coldisle]

I really enjoyed the video and the persistence! A great truck and worth being reborn.

[@digdilem]

You're going to have to call it Rainbringer. Nice video, and I can't believe how little rust you guys get there.

[@georgepins9387]

Ordered my Jumpstarter. Looks great and a good deal. Thanks for the tip.

[@theetravisb]

Heck yeah 💪🏼

[@danielrivera5858]

I just love the view of the mountains when you drive up the road looks very nice.

[@kevinfloyd1864]

That button you said was for the horn, I would check it out again when you get the truck running. I have same set up in my 1970 Chrysler put there by the previous owner. When pushed, fuel is injected into the carburetor. By the way, my engine is a 440 four barrel with a Holley carb. Really enjoy your channel, discovered it about two months ago.

[@theetravisb]

Thanks for sharing glad you enjoy

[@marknewman570]

Good old rock auto parts. I'm done using them after buying multiple parts and everyone has been scrap

[@frankm8533]

I had a couple bad experiences with them to. Friend of mine runs a Parts plus commercial store I only use him it's close to my house I can take anything back and I get tech prices

[@danmadison5087]

It's been kinda a rule, at least in Arizona. If it's four wheel drive and it runs. Its $5,000+. Idk if you're doing a paying it back sorta thing. But I like your style. Great vid. See you on the next one.😎

[@affordablecommunications8710]

This video shows the reality of cheap aftermarket parts. I had the exact same scenario with a master cylinder. Had to rebuild the new aftermarket one, pitifully

[@theetravisb]

It’s a disgrace

[@somerandomguy3868]

Hey it runs, drives and isn't falling apart, you're way ahead with this one

[@ryanstubblefield8593]

Hey buddy, love yalls videos.. good to see you learning from your Dad. Quick tip the next time you do rear brakes on dodge truck.. zip your axel cap nuts off then take a hammer and lightly smack around the edge of the capof the axel..the cone wedges will pop out at you without all the prying and chiseling. Just a helpin hand buddy. Keep up the good work