Dodge journey rear hub / assembly replacement

like comments and subscribe and share the love.
help me help you by donations no matter how small it is i really appreciate it here is my link to PayPal send it as if you are sending it to a friend
www.paypal.me/...
thank you for your love and support
here is the link for the parts:
left rear amzn.to/31yZzB1
right rear amzn.to/33voqHD

[@DULLAHGOSOHARD]

here is the link for the parts: left rear amzn.to/31yZzB1 right rear amzn.to/33voqHD

[@davidstreling3690]

use a slide hammer and then clean the rust off with a scrub pad and use some anti seize paste on the hub and spline,

[@joshrebeccanorman9835]

why on earth would you reuse that sensor line?? makes no sense no to just use the new one, regardless if the light was not on. shady

[@wearzymaan1541]

Let the fight begin, exactly what should be said when doing wheel bearings.

[@DNREnt]

What size are the 4 bolts that hold the hub in?! Never specified in the video

[@davidstreling3690]

he said 16mm

[@andreshaw666]

Do u know the torque specs for these bolts?

[@DNREnt]

Good question I also need to know

[@philcasogonzo14]

Tight as hell is the spec

[@mingzdijaps]

Yup he's Jamaican

[@richarddiaz8248]

Thanks for sharing the hard part of taking it off that’s the part I had a hard time with other people are just skipping through it

[@dafunk4344]

Where can I get that long chisel that you are using? Is there a proper name for that flat head chisel?

[@RichardMiller-tq6ut]

Why would you even consider not replacing the sensor? Has it occurred to you there is a reason why it comes with a new one? I wonder what your customers would say

[@jamesriechers2285]

I came in the comments just to see if I could find someone saying this

[@pgg3911]

@Dullah thanks for uploading. Very good camera work, showing under the car to see what's going on. Keep up the good work.

[@Relevantminded]

That journey sure needed alot of work done on it

[@Jayzc66]

What size is the socket?

[@kristurek2501]

Thank you!

[@peteross2293]

Uummm, it's called the hub

[@Shawn855]

great video. Thanks for the help man.

[@daze_0968]

Nice ...very helpful ..keep it up..

[@mikecross3383]

Very helpful!

[@WPGinterceptor460Interceptor]

2017.. 2 years old and already doin hubs.. wow

[@636HKBM]

smh for real man worst car I've ever owned in my life....

[@WPGinterceptor460Interceptor]

@@636HKBM ive got a 2011 and mines been decent.. it is the 4cyl model! original hubs still in 2023, 100+k miles

[@emmanuelperezchica4735]

This man really knows what he's doing 👏 And he's very detailed which is helpful👍

[@steved8714]

This is an ok showing of how it’s done but it’s not great, leaves a lot to be desired.

[@alexg5531]

axle nut torque?

[@stephenmarketos778]

81lb