Dodge magnum 3rd breaklight cheep fix

[@johnnyd.3617]

You really did that project.. awesome saved me $107.00 Thanks Man.

[@blizzak454]

holy crap, you're hilarious! I have an 06 mag and the 3rd light just went out. it's 2017 and still not much info out there, so you're the expert. a quick check online and it looked like the oem part is around during $65. might do something like you demonstrated.

[@kpall312]

Awesome bro, that's exactly what I needed. Just failed inspection with my srt lol. Thanks for the video!

[@ladellmorris2745]

Are you age 70 cause your slow talking and working as hell😳 i mean dam

[@homerhall7301]

Good job, explaining it to me. Thanks a lot I have a Dodge Mag as well. Bay you say.

[@jonmortrud486]

You don’t have to replace the light assembly…the problem is the crimps on the LED’s. This assembly has no dynamic parts so the issue is the connections and crimps always give it up over time. Force a blade screw drive in the seam of the lens and give a small pry all aroung the lens going around and around prying more and more as you go and POP!! Notice the crimps on the LED’s. put solder paste on the crimp and flow solder on the joint (800 Degree soldering tip recommended). When the solder flows move on to the next LED…not the same one…let it cool. The white wire is + so stick straight pins in the connector and check on the car battery. It will work and if not, you have a cold solder joint so redo. There are no dynamic devices in this light so flow the solder and it will work. Seal the lens to the assembly by scraping RTV into the lens lip and the base when assembled. It will not take much so be cool. Good Luck Guys…I’ve done several this way…takes from start to finish about 45 minutes…just say cool and don’t force anything.

[@thatown2]

Sooo what's the link to your video?

[@ajdavis3607]

thx this helped me out a lot. only thing is you have some shit on your back window. i would clean that shit off if i were you

[@lazarodelgado6685]

Thank you

[@jamesd7154]

Thanks man great idea. Been riding with just brake lights no third for the longest. One taillight went out and got a ticket...lol guess O will finally fix it..lol

[@kimbates2073]

same here

[@micahmoore1997]

hay dad good god

[@BTC909]

What is the voltage at the plug?

[@BTC909]

I'll answer my own question. It's 12V.

[@Ihatethewaythatyou]

"better then spending 90". idk how much y'all are finding them for but I got One for 40 I think online, and the salvage yards here are kinda incompetent. But man this seems like a fair and probable fix. crazy how expensive it is, already a little hassle to change out as is.