Dodge Ram 24v Cummins APPs Adjustment (P0122 Trouble Code Fix) Step by Step!!

Tools I use:
Milwaukee 3/8" M12 Impact (bare tool) - amzn.to/3Etyxyt
Milwaukee 3/8" m12 Impact (kit) - amzn.to/2ZuUDBe
Milwaukee 3/8" Ratchet - amzn.to/3Bp4ru3
Milwaukee 1/2" Impact - amzn.to/3GtNUIU
Milwaukee Flashlight - amzn.to/3EtzeI5
Milwaukee Fuel Combo Kit - amzn.to/3w0ZVRq
I am in no way sponsored by Milwaukee, I am just a huge fan of their tools. It really helps this channel by purchasing through the product links I provide, thank you.
In this short video I show you how to adjust you APPs on your second gen 24 valve Dodge Cummins.
Hope this video is helpful, and be sure to subscribe for more!
Bosch Scan Tool: amzn.to/2UNnI4Z
Disclaimer:
I AM NOT A PROFESSIONAL
Due to factors beyond the control of myself, I cannot guarantee against improper use or unauthorized modifications of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of myself, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Jake

[@donniebeamon9162]

This video saved me not only a very big headache but about 1900 dollars. Thank you sir

[@SirNoodle]

I'm hoping this fixes my dead pedal if not then I have to buy a new vp44 🥲

[@elywrlds594]

@@SirNoodleany updates?

[@jamesstephens746]

Thank you. You're a life saver. No one else had the info we needed.

[@johnyherbs4173]

Great video man. I really enjoy your videos, thanks for all the information. Keep it up

[@TubeInspire]

Thank you for your help and time

[@karleastman5456]

Thanks for posting the video, it is great information!!!

[@marsh31z]

This is a nice video thxx for the help..!

[@johnM-Jr]

i def have sluggish shifting in auto trans , and code p0122. '98 24 v. he adjusted w set bolt, other vids show loosen two t-20 torx and rotate apps a bit to adj voltage? also other wire color was yellow. great video.

[@jesusportillo4891]

On what setting do you use the multimeter

[@threize6840]

For anyone who doesn't have a sticker on their APPS, mine says 0.519 Volts

[@358trucking]

Outstanding Sir! Bravo.

[@cb7tune]

would lack of this adjustment cause total throttle failure? just installed new apps and worked fine for 5 minutes then lost all throttle control

[@jesusortega7828]

Hello, I did this already but it still seems to be doing it. Do you think I just need a new sensor?

[@ixryq8368]

What if voltage reads 5.02 when you “idle” voltage and full throttle?

[@fistymopar2356]

Oops, forgot to tell which wire to probe.😩

[@briansbrain3624]

It says blue with black wire

[@claylund4086]

I have a 2001 dodge cummins and my check engine light won't go off

[@brandoncarpenter5195]

What size bolt for the apps? Mine is gone also

[@j-bobsgarage7535]

that bolt i put in was a fine tread bolt, not sure of the size i just found one that threaded in nice. Im guess its a metric thread.

[@threize6840]

10mm boots then a T20 torx screw

[@devin3156]

I have this code intermittently. And sometimes is also says controls module program error but not every time. It will get dead pedal. And come back. Completely random. Clearing the code will fix the issue for a random ammount of time.

[@gw1652]

Ever figure it out devin?

[@devin3156]

@@gw1652 replaced tps and it went away

[@adriangomez182]

Did you ever figure out the p1693 code?

[@j-bobsgarage7535]

No I havent had a chance to look into it yet

[@SirNoodle]

​@j-bobsgarage7535 did you ever fix that code I have the same code and it seems to be related to the vp44

[@dosstheboss100]

Mine says voltage high?

[@Freddysimpsonn]

would this cause the truck to not want to move bc tc is not unlocking? mine is the same .227 volts as yours was

[@threize6840]

I'm also experiencing torque converter clutch issues. But in my case it is a repeated lock and unlocking while going down the highway. Most noticeable when on the gas going up a hill

[@Freddysimpsonn]

@@threize6840 clean your grounds. My old one did that. Terminals. This one Is getting a full trans rebuild

[@threize6840]

@@Freddysimpsonn how many grounds and where? My voltage was originally set at set at about 0.490 and 3.52 at WOT. I changed it to what another video suggested which was .610 idle and 3.8 WOT. Didn't work. It still unlocks and locks back up repeatedly but with a check engine light, code is p0122 TPS voltage too low, even after raising it up

[@threize6840]

@@Freddysimpsonn I cleared the codes on the computer and the problem is still there but no check engine light. I put the voltage back to what it originally was for idle and WOT

[@threize6840]

@@Freddysimpsonn i should also mention that I did do the pedal thing to let the ecm learn the new voltages