Dodge Ram 2nd Gen Steering Upgrade Tie Rod

[@robert-wr9xt]

Thank. You explained the upgrade and the old part well . Thanks

[@dean8736]

Adjustable stabilizer bar 99$ was very impressed with quality just make sure u tighten jam nut I drilled small hole 1/8 inch in the nut on one flat side an inserted set screw N/P

[@dean8736]

On amazon

[@leevahal900]

I have a 99 2500 8800# gvw with a 60 and it has the HD steering links that connect both tires with the tierods.It is not the y setup.The drag link mounts above the steering arm and to the rs tierod which goes all the way across to the ls and couples to another tierod..It dosent mount to the top of the tierod like the t steering but at about a 45 degree angle on the rs tierod.It looks a little beefier than the y set up on a 2500 3rd gen that has a y setup and mounts above the steering arm.

[@CopperheadGamingChannel]

Longer control are really needed on this truck, that front axle needs to be pushed forward a couple inches

[@adaminnovations5517]

I’ll agree it could move forward a inch. I wasn’t expecting the springs to lift it as much as it did.

[@chasemedcalf7918]

Tried to do it on my 98 ram 1500 it does not work on my pitman arm so I bought a 2500 pitman arm hopefully it will work

[@thekillerduck6977]

I know this comment is old but I wanted to do the same on my 96' 1500. Can you give a update on the fitment and if it works well?

[@jdsrcs8061]

Cool vid!!!! I did a similar swap on my 01 Ram 1500. I used the T set-up from the 97-98.5 ram 2500s. It has worked great for over 10 years. It's weird that dodge used a t set-up for just a year and a half.

[@MrRewdtv]

Thanks for the part number, super appreciated!!

[@adaminnovations5517]

Your welcome

[@SmudgyContent]

Gotta 98 ram2500. Trying to find some master pro tie rod ends to compare and yet to find a video. 😂 Really wondering if I got the wrong parts from Orillys auto parts. Seeing this video the ole farmer already upgraded the steering to what you have here… has a noice adjustable trac bar too. Which is completely shot. Would love to rebuild it but the rust belt USA has taken its toll. Good video here and it was actually very helpful.

[@munoztorresjose79]

Good info, really clears up the upgrade and what to expect when doing it. Thanks!.

[@lanebellinger166]

What's the part number for the steering stabilizer?

[@rayterry7]

Is there anything that can be done to fix the steering to help them actually make a U-Turn? Lol my single cab '94 2500 take 10 blocks to make a U-Turn haha

[@andrewviperpingel9565]

More power and tire smoke !

[@NomorEcars-f2b]

What size sockets I need to pack. Going to do one tomorrow

[@ryleyscoble27]

How did you put the steering stabilizer on?

[@lockeford23]

What part number for the steering stabilizer? I'm having the hardest time finding a bilstein steering stabilizer. I have bilstein 5100 all the way around. Please help

[@kevinaweseom2866]

I’m thinking about just winging it with the b8 5100 , what did you decide on?

[@lockeford23]

I went with part # 33-170794

[@kevinaweseom2866]

@@lockeford23 yes I found it in here , thank you

[@goodthingshappen5389]

Hey what model Bilstine Shock did you use?

[@kevinaweseom2866]

33-170794. Bilstein

[@tannerbatten7578]

People say the tapers on the ball joints are bigger on the 4th gen upgrade is that true

[@penguinatorfps8205]

bro whats the name of the sstainless bar behind what your doing in this video? and where to buy that one at?

[@kylecarnage]

Did you need a new pitman arm or could you re use the old one?

[@josepharuanna9924]

68039930AA is the pitman arm part number you want. i heard you can use the old one but its a bad angle.

[@kylecarnage]

@@josepharuanna9924 i bought that exact arm off ebay and it did not work on my 2001 dodge ram 2500 with steering upgrade. the hole was way too big for my steering box.

[@marineswarm]

any updates? it good?

[@brucerazor5202]

Thanks I just ordered it !

[@ObamaoZedong]

When doing your own quick and dirty alignment just to make the truck driveable to the alignment shop, do you carry over the thread count/measurement from the old linkage to the new one or what?

[@adaminnovations5517]

I_Dont_Eat_My_Friends no not necessarily. what you want to do is measure the distance on your old trac bar on the truck from tie rod to tie rod then install the new one with the same spacing but make sure when you do you screw left and right tie rod end in equally to that spacing distance!

[@garagebrosEthom1]

Just changed mine and have done several others the same way. Measure front and rear of front tires and have about 1/8 inch toe in, it will drive good and not wear tires bad.

[@MrSh4des]

What type of steering stabilizer shock did you use?

[@kevinaweseom2866]

lol I’m curious too , did you take a chance on one?

[@kevinaweseom2866]

33-170794. Bilstein

[@jeffreysylvester905]

Nise video. Doing same upgrade on my 02...what track bar is that? Looks nise.thanks.

[@adaminnovations5517]

Core 4x4

[@richardstallwood2120]

Where did you that t steering upgrade from and your sway bar links ? I can't find a set to fit mine any help would be appreciated.

[@genehart261]

Rock Auto is one source, it's where I got mine.

[@dannykinerson5719]

I need help rebuilding my front end

[@-tf-boforsho4008]

can i get some links to this stuff or part names so i can order them from rock auto

[@everettrutan7915]

Shock part #???

[@jptrucker29]

Did it make a big difference?

[@kingsabi-g55]

Torque spec ?

[@devonsk8s4]

Hey what trac bar do you have??????? Thanks

[@hardluckoff-road798]

Don’t try to order a kit from synergy. I tried in Jan and was told 2 weeks after I placed my order the kit for mine was on back order. Tried again 2 weeks ago and was told after 2 weeks and many emails was told would still be a few weeks waiting on welding and powder coating.

[@m4steele]

Ordered my stuff a month a go from Synergy and installed it Yesterday. Awesome product!

[@dean8736]

Digging the controls arms what brand u go with

[@truckcampertraveler7369]

Dean Ringler x2

[@adaminnovations5517]

Thanks Core 4x4

[@dylangraff4058]

Hey great video! I have a question if someone can help me out.i bought a 2000 dodge ram 5.9 magnum. That really needs a front end kit. Is the suspension the same between a 5.9 magnum and a 5.9 cummins

[@adaminnovations5517]

From what I’m told everything is the same except frame thickness on the 1500. When I ordered my lift it says for gas or diesel on those springs. It will give you a little more lift with the gas do to the weight difference.

[@dean8736]

I have same stab links lol factories kept snap n off

[@signal4x77]

What company did you get the tie rod steering bar kit from? Do you have a link?

[@signal4x77]

@peter conway that wasn't my question. When googling that, one's for $700 comes up or one's that don't have the damper shock for $300. I want to know which one he ordered.

[@MrAmf4me]

Great video do you know if this kit work on a 2001 2500 cummings 4x4 , all the places selling it say it fits only 03-13, thanks

[@whatsit2ya247]

Yes, I did it on my 01. Watch out on stock wheels, I had to grind a little something (can't remember exactly what, been awhile) something was rubbing a little. Been working good for several years.

[@jaxturner7288]

Did you figure out anything or do it yet?

[@whatsit2ya247]

@@jaxturner7288 I installed on my 01 without much issue, if you have stock wheels the ball joint ends will rub a little, I just grinded them down a tad, also I noticed (saw a rub mark on tie rod from pitman arm were I must have hit a large bump off road? I guess some people have got a different arm to change the angle? I've had on for several years and glad I did. Although if money wasn't an issue I'd sell it and buy a Duramax 😂

[@jaxturner7288]

@@whatsit2ya247 01 what? And do you know what axle you have?

[@whatsit2ya247]

@@jaxturner7288 01 dodge Cummins 2500

[@thegman4759]

Does it work on a 2wd

[@hectorgarcia9509]

Wats the shock part number sr, doing the same set up with the linkage on my 2001..

[@adaminnovations5517]

Part number is 33-170794. Bilstein

[@bryancox4488]

Where did you get steering kit Is lt stock for did year or after market ?

[@whatsit2ya247]

I got mine from Amazon a few years ago, factory part, way cheaper than those aftermarket, but also no grease zerks😔

[@andrewviperpingel9565]

Did you have to buy bolts for the new tie rods or were the 01 bolts the same?

[@adaminnovations5517]

Same bolts

[@jeremywilson8334]

Great video, thanks

[@ericchapman4300]

Will this work on a 01 1500 too? Most of the info I find is about the 2500/3500

[@xhongxina286]

Get a 2500 cummins

[@dunnoyolo2238]

Dodge off road is only way to go.

[@gregoryward9620]

Dodge off road sucks!!! Got the run around for months, had to report them to the BBB and file a claim at my bank to get my money back... over 6 months later!!!!!

[@dunnoyolo2238]

@@gregoryward9620 wow too bad. there products are awesome never had any issues

[@frankhayden2528]

would that mopar part# be the same for a 2002? thanks

[@MrAmf4me]

@@douganderson7002 do you know if this kit work on a 2001 2500 cummings 4x4 , all the places selling it say it fits only 03-13, thanks

[@bigdaddy110802]

Will this part fit on a 2001 dodge ram 1500 ?

[@boooyaaababy651]

Was wondering the same about my 96 lol

[@Deckers_fab]

Where do u buy this at. I need it now got ran off the road an messed mine up

[@dirtroadmechanic2444]

Here is the Mopar part# 52122362al

[@MrAmf4me]

​@@dirtroadmechanic2444 do you know if this kit work on a 2001 2500 cummings 4x4 , all the places selling it say it fits only 03-13, thanks

[@harder345]

What year model did you get the track bar?

[@adaminnovations5517]

Track bar was custom made by core 4x4. Synergy makes the bracket. At the time when I installed it I had to have them make it for me. I wanted my track bar to match my control arms. It’s based off the 4th gen.

[@dean8736]

Red top gearbox an gearbox stabilizer kit

[@lincolnwilliams6905]

Can we get the bilsten shock number please

[@kevinaweseom2866]

What did you decide on

[@seanhobbs1989]

Thank you so much for this video man I'm having a heck of a time with my Dodge ram I wanna try and find that part for mine but I can't find it I have a 01 Dodge ram sport 4x4 do you think it would work?

[@adaminnovations5517]

Yes I got it through eBay.

[@RebelBoy-is7hw]

Just gotta order factory steering for a 4th gen

[@andyvillafuerte834]

Could I get the part number for that.

[@dirtroadmechanic2444]

Part# 52122362al

[@scott96999]

How's it feeling these days?

[@adaminnovations5517]

Driving nicely, I added the redhead steering box and it really made it all work together.

[@bayouboy6615]

My 01 dodge ram 1500 don't have that

[@dean8736]

Ha ha 1999 comes with it factory

[@leeheckrote9923]

I just put on the 4gen on a 1999.. with some Modification..

[@kyleshoestock1088]

​@leeheckrote9923 could possibly help me with what pitman arm you used? I got the moog kit and it bolted right up to my knuckles but not my pitman arm please help 😅