How to Replace Right Inner Tie Rod 94-02 Dodge Ram 1500

Buy Now!
New Tie Rod from 1AAuto.com 1aau.to/ia/1ASTE00213
1A Auto shows you how to repair, install, fix, change or replace a broken, busted, bad, or damaged tie rod. This video is applicable to the 94, 95, 96, 97, 98, 99, 00, 01, 02, Dodge Ram.
🔧 List of tools used:
• 18mm Socket 1aau.to/ofk/1AXAA00043
• 21mm Socket 1aau.to/ofk/1AXAA00043
• 22mm Deep Socket
• Pickle Fork
• Side Cutters
• Slip-Joint Pliers
• Ratchet 1aau.to/ox7/1AXAA00016
• Socket Extensions 1aau.to/otg/1AXAA00015
• Torque Wrench 1aau.to/ogY/1AXAA00044
• Hammer 1aau.to/oda/1AXAA00091
For More Info visit us at 1aau.to/h/bT4/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@brothersalvarado7682]

Great video

[@tgill875]

anyone else friggen love this guy?? gunna want to bonk this, bonk bonk bonk hahahah

[@levifurney8661]

Do they offer this with a reverse taper on the steering stabilizer for a drop down pitman arm?

[@rhondacaron8258]

My daughter's 1998 dodge ram 1500 has steering wheel turn but not the tires. Any ideas?

[@Norse_Jinchuriki]

Anyone else here veerhicle ?

[@fernandomartinez-ev9ln]

Yes, I thought I was the only one. It was driving me nuts!!!

[@natureandrandomstuff]

Awesome video. Now how can I get that torque wrench you used here?

[@ThomasJones-sz3sx]

Snap-on dealer has them!!

[@loganwork7024]

@@ThomasJones-sz3sx you're wasting your money buying from snap on

[@kushkiller7108]

What about the flat bar that was bolted to the sleeve and tie rod? That is for a factory recall so the sleeve doesnt move on it's own. Probably shoulda been reinstalled.

[@1AAuto]

+kush killer Thanks for the tip! We'll pass this info along to our production team.

[@millermatic140]

Is this a 4wd or rear wheel drive? Are the kits you sell greasable fittings?

[@1AAuto]

+B E Thanks for checking us out. This is a 4WD application. The parts we sell are all pregreased and sealed units. They will not be serviceable and would not require grease fittings.

[@millermatic140]

1A Auto Parts I do not see the pitman or idler arm on your site for a 98 ram 1500 4x4

[@1AAuto]

+B E We do not currently have the pitman or idler arm for your vehicle. Thanks for the question.

[@thruend2496]

I wish you'd take in account that not everyone has a lift. So... Do we need to jack the truck up? Or can we just replace this?

[@ThomasJones-sz3sx]

Great Video....Gotta get myself that nice SNAP-ON Torque Wrench!!

[@RobKingRC]

You don't need to replace the sleeve most of the time.

[@1AAuto]

+Rob King Thanks for checking us out!

[@draytonpitts9261]

Wow good job messing up the threads.. wire brush

[@pineappleboi27]

They replaced the whole thing...