Does it perform as good as it looks? Kyosho KBL10L Tacoma Review

[@TrokaRC]

You take the good, you take the bad. You take them both, and there you have the facts of life.

[@WinstonCorneilius]

Lol

[@bboss8048]

Girls, girls, giiiirrrlllssss.

[@ares333x2]

Sounds like Marriage 😅

[@geeboo27]

😂😂😂

[@scalebuildersguild]

Was Jo everyone's favourite? 😂

[@ssamssamssamsson]

Fantastic running video! Some inner fenders would do wonders for the overall aesthetics.

[@Jeeplee_rc]

I don't know why all rtr don't have inners at this point 😂 especially these scale bashers

[@glennjthompson332]

@@Jeeplee_rc Inner fenders is a must for kyosho aftermarket parts for it?🤔 It helps to keep sand and debris out of the bathtub chassis, it could happen in the near future, is what the product needs?🤔

[@scalebuildersguild]

I think so too!

[@redlinetrailrc8862]

Oh great, THANKS Matt, now I need one. The cinematics you do should be on every company's website, I mean second to none for how good you make these things look. Time to make space on my shelf!

[@scalebuildersguild]

Do I hear some sarcasm in your voice 😂? Thanks for watching and thank you for the compliment. I shared the video with Kyosho, and they told me that they were planning on filming a promo video but now they don't have to... I was pretty chuffed when I heard that!

[@redlinetrailrc8862]

I can imagine! @@scalebuildersguild

[@goldenmanuever1176]

I grew up with Tamiya and Kyosho. That’s all there was. With that being said, this one is a no-brainer; I’m getting it in electric lime with the optional LEDs. As far as I’m concerned the Carisma and the Element Knightrunner got nothing on this one..and unlike FMS, I know that when there is replacement part number in the back of the manual, that will be the actual correct number. Finally, the Gods have spoken; a fully licensed TRD Pro, from a quality Japanese manufacturer, with optional F/R LEDs at a reasonable cost, that does more than 2MPH.

[@scalebuildersguild]

Great colour choice! Enjoy it!

[@monchichis333]

The Element Knightrunner is actually meant for crawling and scale overland stuff. This Kyosho one is a basher and not for crawling. Two very different chassis and suspension setup

[@goldenmanuever1176]

@@monchichis333 I understand that completely. The reason why I like this truck is this the first thing in years, possibly decades that bridges the gap between goofy and goofier. The hobby has been taken over completely by the crawler crowd, yelling portals, portals portals and going 1.5 miles an hour, and then on the other hand, you have the basher crowd driving 75MPH into a wall in something that doesn’t even look like a truck. This bridges the gap between scale, realism and going more than 1.5MPH; something the hobby has lost.

[@robinarmstrong9790]

Oh man, your running videos never cease to amaze me, so good, and so cool. Keep up the great work.

[@scalebuildersguild]

Thank you!

[@matthvids]

Very nice rig. I love bashing and having some fun by smashing the throttle 😍😍😍 Great running video, as always

[@scalebuildersguild]

Thanks for watching!

[@jeremiahfrancisco3034]

picked one of these up a few hours ago here in Japan.. cant wait to fly back home in a few days.. feels like Christmas!!!

[@scalebuildersguild]

So cool that you're in Japan! We're planning to go there in the fall. Safe travels!

[@myong9]

I was doing the drift thing with the RCs for a while. I ended up selling all my drift cars about 4 years ago due to me just kind of getting bored with them. Fast forward to today, I saw this truck online yesterday and fell in love with this thing! I ended up placing an order today for the lime one. I can't wait to get back into the RC world with this truck!

[@scalebuildersguild]

Nice choice! Welcome back to the hobby!

[@spenn2007]

Not only is this a Review, but it's also a got damn product trailer, my god props to you for the talent you possess and patience to create this type of run segment. Thought i was watching an Arrma advertisement lol.

[@scalebuildersguild]

I actually heard from Kyosho, and they said they no longer needed to film a promo video for it, because they had mine. High praise indeed, I was very chuffed!

[@mikehagquist5198]

No one does the rolling footage as good as you in the editing, not even the big names like losi , traxxas ,ect. I’m sure I said this before. Professional

[@scalebuildersguild]

That's a huge compliment! Much appreciated and you made my night. Thanks for watching!

[@poorboysrc]

Very cool rig, hopefully you're right and they come out with a Rally Car version.

[@Pmeyer1226]

Would really like to mount that body on a crawler.

[@2Geek2bChic]

I really like the look of this body and I think the wider fenders give it a trophy truck vibe. There are a couple of things that stood out in your running video that I'm not a fan of though. Firstly are the gigantic holes in the wheel wells that allow you to see all the internals and completely through the truck. It looks like the body sits up way too high and I don't like being able to see the entire chassis below the doors, however it appears that the mounts are adjustable so it's probably fixable. Secondly, while I appreciate the extra padded body supports they didn't stop the body from looking like it was moving around on rough terrain but again I think this issue may be fixable as well. I'm also curious if this comes with a scale light kit and if so it would be nice to see a future video that addresses some these issues. 🤓

[@scalebuildersguild]

Slow motion always accentuates any movement. Thanks for your comments! The light kit is available separately!

[@verigone2677]

That is actually a pretty good set of bones and geometry to make a Gen1 Humvee from...much interest in Kyosho again for me, would love to see them make a 2wd version of their Fazer platform as well.

[@derrickwilliams2903]

Except that it doesn't have portals like the Gen1 Humvee, so it's lacking ground clearance and would look pretty weird.

[@verigone2677]

@@derrickwilliams2903 why I said good bones and geometry...meaning there is still work to do. Why would adjusting for portals scare me off? I would be rebuilding the front and rear bumpers either way...so the added ground clearance from fabing portals can be taken up by a beefier more functional bumper maintaining the rather good scale proportions....also, I would say that this RC is sitting about a portal axle too low from what I know from seeing them in person...so, I guess we can agree to disagree?

[@derrickwilliams2903]

@@verigone2677 I think you are underestimating the difficulty of adding robust portals to something which doesn't have portals available for it and was never designed to have portals. Also, it would likely push out the wheels even wider and mess with the proportions. But good luck!

[@verigone2677]

@@derrickwilliams2903 I think you mis understand, I am not trying to make the thing into a stage 3 comp truck...the plan is to relace all of the suspension with hand bent/milled parts...so adding portals to the punch list really isn't much more. Also, for design, any 1 to 1 will do just fine as will any under drive config, so again, I am not seeing this mythical wall of hard here....were not talking about something in 1/24 scale here, or someone who regularly gives a shit about off the shelf parts availability, lathes, mills, bandsaws, and brazing torches exist for a reason.

[@spenn2007]

Oh, i almost forgot, this RC is awesome, I'm definitely considering getting this based on its performance.

[@kennysactionfigures]

You and Josh are awesome. You help me through covet and we never met. Please keep up the good work

[@scalebuildersguild]

Thank you! Will do!

[@cheagle464]

Don't know what I like better. The run video or the jams.😊

[@scalebuildersguild]

Thanks!

[@michaelavery4427]

I've always wondered on rtr trucks "why not a tonneau cover as opposed to a silly looking shallow drop bed?" Please take note Axial Traxxas etc.! Thanks Matt!!

[@scalebuildersguild]

Thanks for watching!

[@danielcrafts7349]

Ya definitely on my list. Looks good and is another platform to become familiar with. 100% agree about the body as well as rally

[@liamRC5487]

Line the body with self adhesive felt. It stop tge rattle and muffles sound. I use it on all mine

[@scalebuildersguild]

Great tip!

[@scottleath3863]

Planning on purchasing and making this my new go to basher. I will be adding a light kit to that gorgeous body since buckets are included. Would love to see your ideas for (if)? The body height is somehow adjustable to reduce the tire see thru gap? And also for some type of dust cover like is offered for other rc vehicles..? Keep the great content coming. Ps maybe you and Harley could use these as a base for your next "(rally) build off ?

[@scalebuildersguild]

Have you looked at the Vanquish Phoenix, Fordyce or Pro? Any of those models would be a great addition to your fleet!

[@Anthony_underscore]

Looks like the body could stand to be lowered a good bit, and maybe a set of inner fenders as well, though that may be asking a bit much from a basher.

[@XWXW-lk4jf]

I was thinking the exact same thing. It kind of ruins the scale looks too. Just way too high. It also looks like it lacks protection from debris getting in the chasis. Excessive debris in the chasis is a major pet peeve of mine because you end up having to stop and clean it constantly. Plus, there is no ability to drive in snow with a set up like this. Offroad trucks need inner chasis protection for goodness sakes! I gues you could use some heavy duty tape to try and seal it more but that is not ideal. That issue is a big enough one for me where I will pass on this one. The Traxxas Maxx with a scale body will suffice for now. It offers plenty of protection and more speed anyhow. Will wait until someone makes one with more inner chasis protection

[@scalebuildersguild]

Lower than it is will introduce a ton more body rub. It’s that high for a reason Im afraid.

[@EdibleOutdoors]

I agree, I have an upgraded Traxxas Rally and I wouldn't mind trading up. I think a Rally car version of this would be awesome.

[@Wreckedekcoupe]

I want that body! And truck! The color and detail is amazing 👏

[@scalebuildersguild]

Glad you like it!

[@supadeluxe]

This looks like a really good chassis and it will be interesting to see how they use it.

[@rezracer6986]

Love the truck, and I’d love to see Kyosho make the chassis into a rally platform, especially with a Ford Escort II or Even Toyotas GR Yaris WRC

[@jaylivengood2697]

Looks awesome. Wish it had inner fenders so you don't see the electronics so much

[@JDMJDK]

Kyosho products always seemed more mature and priced accordingly when I was a kid in the 80s and 90s. Nice truck, Yotas rip! #77

[@thomasblair7996]

Great looking body,running strong,definitely worth looking at!!!

[@spinrushrc]

I had a chance to see this at the Tokyo Model and Hobby Show. Most beautiful rig at the event. Now I see it’s not just a pretty face. So what’s next? Well, for now, let’s see how Kyosho handles it’s popularity and the aftermarket industry. Are they going to play nice or take a hard line proprietary stance?

[@scalebuildersguild]

I'm very jealous that you got to go to the Tokyo Model and Hobby Show! Hard to say what the future will hold!

[@DavidFernandez-sc5ws]

Love how this looks. Was thinking about getting it but will probably get a sct410 2.0 and put this body on it.

[@The_RC_Guru]

You won’t regret that 2.0. Fantastic kit. Tough as nails.

[@mduvaul]

You found your next budget build off vehicle with Josh I can see you putting in an interior.

[@krlaturn]

Rally Comeback!!!!! Yes Please!

[@Jeeplee_rc]

I dunno why rc companies don't put inner fenders on these scale bashers! Would improve look so much. Aswell as keeping out dirt.. I had a Traxxas slash raptor with custom inner fenders it was so good!

[@glennjthompson332]

Kyosho needs to make this adjustment in the near future for this rc truck?🙄/it looks off on me.🤔

[@billsrcadventures8806]

Sweet action shots Matt!! This thing looks rad. I need to check one out in person

[@PsychoticBovine]

Oh, that's just great. Looks nearly identical to my real Tacoma TRD. And they have it in Lunar Rock. Guess $500 isn't too outrageous.

[@WhatAboutRC]

i LOVE... LOVE how they added a bed cover look rather than doing the terrible looking semi deep bed floors other companies do that never look scale and just look terrible because they cant be full depth. Im sold on it just from that alone. On another note wonder if a Slash Hardcore chassis would fit under it to complete the scale look of the entire thing.

[@scalebuildersguild]

Under the Kyosho body? You’d have to figure out a mount, and a wheelbase change. Not sure it would work!

[@WhatAboutRC]

@@scalebuildersguild would be nice if it would work. Would give it the IFS up front and the solid axle out back like the real truck.

[@WhatAboutRC]

​@@scalebuildersguildlooks like this and the Slash both have a 13.2 wheelbase.

[@JimBoBJames-no5db]

I like this truck a lot. I'm in Australia and have placed a pre order on a Traxxas TRX 4 Ford F150 high trail way back in June this year. Still has not arrived and in August a shipping container was turned back at the Port of Melbourne due to containing small amounts of asbestos, this was a Traxxas shipping container. Now I'm getting fed up with waiting and I might get a refund on the Traxxas and get this Kyosho instead. It's quite a nice looking truck. But 1 or 2 small things sort of don't look right to me. The bodyshell sits up really high and looks strange due to seeing this. It's possible to look right through the chassis and body shell. Then the bodyshell also whilst being beautiful to look at actually looks really flimsy for a truck that can reach high speeds and is meant to be a basher. I agree with a comment made by another viewer , this could really benefit from some inner fenders. And the flimsy looking body posts and underside bodyshell locating area looks sort of flimsy too. So for instance if this truck takes a solid hit to the front or rear and breaks the chassis then the bodyshell can't be secured into place. I reckon Kyosho bed a little more development on this truck. Here in Australia this is selling at $759.00 Australian dollars. Not bad and the Traxxas TRX 4 Ford F150 high trail is $1090.00 Australian dollars. Quite a difference. Then a lot of people are critical on the faulty electronics in Traxxas . And how bad Traxxas are to deal with. I certainly don't need that headache either. Especially after the initial purchase price, I don't need any further expenses. Yeh I don't know which I will choose.

[@madmikecustomrcrockcrawlers]

Awesome video as always Matt, that's a good looking truck. Just placed an order for one. Looking forward to bashing the hell out of it. My losi Baja Ray has been taken a beating for 4 years now. Just picked up the new 2.0 and it's holding up good for now. Your videos are selling more trucks this year Matt. Go back to bed and rest your shoulder.

[@scalebuildersguild]

Thanks for watching and enjoy your new rig!

[@johnskender4386]

yota's for life! i love anything toyota and that thing looks incredible, i'd hate to drive it and jack it up

[@bongers94]

The raptor and this would be good for a comparison video 🤘

[@kahmed7328]

Definitely getting this! Kyosho is doing some incredible things!

[@scalebuildersguild]

Enjoy it!

[@timesup1001]

I am definitely gonna be getting this just so I don’t need to ruin my 2022 electric lime Tacoma while off roading

[@joedbz7146]

That thing is gorgeous ..I'd totally paint it to look like an 80s Baja truck

[@grantspencer5906]

Awesome video man. Watch all your vids. Music choice is always tops.

[@scalebuildersguild]

Glad you like them!

[@jessesleppy1862]

Always spittin words of wisdom, ahh the facts of life! Another great video!

[@scalebuildersguild]

Loved that show! Joe was my favourite!

[@paulmcnamara2908]

Loving the shell but oooh see how it bends where the bed and cab meet in them slo-mo shots! And don't like how the chassis protrudes from under the shell! But yeah liking it! 🙂👌

[@netcruzer]

The Kyosho Mad Wagon uses this KB10 platform. It's shorter and wider than this one. Both look great IMO.

[@Xjeepguy]

I need this in my life. Would look awesome next to my Raptor R.

[@Ivan92UK]

Hope you turn this truck into a custom build. Love all the builds you do

[@scalebuildersguild]

Thank you!

[@maxflippage9758]

Nice truck beautifully shot. I wonder if it’s down to FOC?

[@scalebuildersguild]

Always down to FOC!

[@saturnfivehynrgrc581]

Good stuff Rebecca. Let Mathew know he's done well with this one. Like button energized.

[@scalebuildersguild]

I'll let him know! I'm very proud of him!

[@dirk5706]

and now a nice comparision between the kyosho and the slash raptor, at the mtb track, bash till one drops out

[@farvacarramrod3672]

I'm excited to see what comes next Rally car would be sick. I hope its wrx

[@brandaneakright6082]

I think they done a great job on that Tacoma honestly, I’ll probably be picking one up myself.

[@scalebuildersguild]

Enjoy it!

[@user-gg4of8kj6y]

The bar in the center you have different names for ...is what I would call a PPF Power Plant Frame

[@midship909]

i said the same thing the drx ve is such a good chassis. @kyosho needs to bring it back with new body options

[@ares333x2]

Now I'm hungry for some tacos... I love scale bashing... And this is why I can't have nice things. LOL. No matter what the scale from full size to 1/10 it's going to get hammered on! 😂

[@scalecrawlnl]

Thank you, cool truck! Talking about Headquake, will this truck, along perhaps with KPOP, be the rebirth as it were of Scale Builders Guild, "Track Life"? Great running footage, ad-worthy shots, I hope the factory gets in touch for a nice YT/IG promotion video. Manufacturer could possibly make a classic, Toyopet Stout truck body next. Cheers 👍😊

[@scalebuildersguild]

Thanks for watching! Looking forward to seeing Headquake hopefully soon!

[@RCRitterFPV]

Love the Rally idea.... 911 Dakar... the body does seem to sit high...

[@timsgta]

Ty for doing this video on this new awesome truck!

[@scalebuildersguild]

Thanks for watching!

[@kellyhartle3251]

I’m am going to order one. I also still have my Kyosho Rally drx and is in amazing shape.

[@scalebuildersguild]

Go for it!

[@djr01974]

Holy cow I’m getting one to go next to my 1:1. 2021 trd pro lunar rock. 🤘

[@roberttruesdell6151]

Rally Baby! 100% agree. I also got your facts of life reference lol

[@scalebuildersguild]

You take the good, you take the bad 😂

[@RadonManRC]

Very interesting! Hopefully I can grab one soon. Thank you!

[@scalebuildersguild]

Thanks for watching and enjoy it!

[@RDEnduro]

Scale bashing is in!

[@imthejaybird]

Looks like a lot of fun!

[@Wedgee]

We recently started racing rally cars, mainly Traxxas Ford Fiestas, at our track. They are great fun! The track is a dirt oval with a jumpy-turney infield. We run the races around the oval with one joker lap through the infield. Again, great fun!

[@Mike_and_Life]

I bought two of them for the wife and I. We love them. Although, I had to buy a body and paint it so they looked different.

[@scalebuildersguild]

So Cool!

[@michaelharvey-nb6vw]

How was the heat on that 2850 motor? I'm with you in that I like the chassis (despite the odd looking top brace) and the body is amazing, but the combo makes me wonder about other iterations to come.

[@scalebuildersguild]

Heat was negligible! Great platform!

[@zoridor16]

😮😮😮amazing New Kb 10 L chassis (more videos please)

[@yetichris]

Hopefully they’ll make a 4Runner body to fit the chassis ❤

[@SlippinFPV]

I use a Fazer with longer shocks and it behaves excellent as a 1/10 rally car

[@rcgoodtimes6657]

Your mission is clear, turn this into the rally vehicle you are longing for. Don’t even waste anymore time pondering, go! Now!

[@scalebuildersguild]

😂

[@simonkubacki9823]

An interesting body would be the Toyota Dakar pickup, super cool. I’m hoping that Kyosho puts out a retro buggy version like the Dirt Master

[@scalebuildersguild]

I’m sure we’ll see a lot of cool releases on this platform!

[@warehouse1429]

Thanks for the video, great video! And would you consider doing some videos on the Turbo Racing 1/76 scale line of cars? I built a 4x8 sheet of plywood size race track for them, they are phenomenal

[@scalebuildersguild]

I’m sorry, probably not. These are a little small for me and my old eyes!

[@bouncingnoise]

Amazing driving video and good music 🤩

[@scalebuildersguild]

Thank you!

[@prophetate]

Hell YES!!! God I want one ❤️

[@rchobbynl]

Picked up a UDR last week and the scale bashing side of the hobby is great! The speed and details on this type of truck matches just perfect if you ask me

[@kashmurray1199]

Awesome truck. Yep, rally would be cool.

[@rctraildriversuk-lone-wolfvide]

Big birthday next week (proper old git now) so treated myself to this kyosho

[@scalebuildersguild]

Happy Birthday next week! My wife says there's no such thing as old... just older!

[@rctraildriversuk-lone-wolfvide]

@@scalebuildersguild Thanks man

[@solbakken86]

That body on a crawler, could look good I think

[@scalebuildersguild]

Finding a chassis to fit will be the biggest challenge, it’s a big body at 13.4” wheelbase.

[@kjscoop7025]

Another one to add to the list, maybe sooner than later!

[@BPlus-oz7cm]

Awesome body... wish it was on the Outlaw Rampage chassis though. Seems like more of a rally car chassis to me.

[@LorenB.]

No acorns were harmed in the making of this film. Stunt doubles were used extensively.

[@scalebuildersguild]

😂

[@LifeWithTheFosters]

I would definitely like a rally version.

[@matusknives]

The car looks really cool and seems to ride well too. But the body makes the impression that it is attached with rubber bands and kinda does not belong to the chassis and looks like it comes from a different car. I also expect it will fill up to the roof with dirt and grass.

[@scalebuildersguild]

The body looks a bit fragile but it held! As for filling up with stuff, welcome to bashing! It’s inevitable!

[@vinnieland6140]

I would like to see a Tacoma vs Raptor video. I can't make up my mind about which one.

[@scalebuildersguild]

I’m sorry, I don’t do a lot of comparisons, I’d rather that you be the one to decide based on what I’ve shown in both. The Traxxas truck is probably going to be tougher overall. Thanks for watching and good luck with your choice!

[@iremsametdogan4263]

​@@scalebuildersguildtraxxas raptor gövde olarak daha metal var

[@auxil47]

Nice Facts of Life reference, not for nothing but it looks like a Green Raptor which isn't a bad thing.

[@scalebuildersguild]

Jo was my favourite!

[@solorex2383]

Good review! Would like to try the body on a Element Utron for a scale crawler build... 🤔

[@scalebuildersguild]

Totally possible. I have an extra if you want to buy it!

[@solorex2383]

@@scalebuildersguild good to hear! Thank you, but i'm in sweden so shipping might be a bit expensive...

[@stevesweb]

Well, well a Toyota I might actually buy.

[@marcushaas44]

I would rather use bodyclips but see inner fenders on these sort of vehicle

[@jerryrocketandthegogogirls3517]

So we think that 2850 could handle 4s with a diff esc?

[@saulomiraya120]

Kyosho did a great job on the truck. I love watching your videos and this one really pushes me toward the Kyosho over the Raptor R. Couple things since the shocks are all plastic which ones would you choose to replace them with along with a different wheel/tire combo?

[@scalebuildersguild]

Hmm, while they’re plastic, they’re not a bad shock, but if you wanted to replace, I’d suggest the ProLine ones. As for different wheels and tires, there’s a ton of short course style that should fit. Check your spacing and offset. Cheers!

[@just.jose.youtube]

Hello Rebeca! :) I do hope Matt compensates you well for your help here in the channel. 😁 Would you please say "Hi" to Matt for me and tell him that he did quite well with this video? 😛 I also see Kyosho coming up with some rally editions for this platform. 🙂

[@scalebuildersguild]

HI! I am very well compensated for my help, thanks for your concern! I'll be sure to pass on your compliments to Matt and will say hi!

[@just.jose.youtube]

@@scalebuildersguild hehehe! Glad to hear that! All the best for your partnership! 😊💪

[@sublimeskull0Ne]

I just ordered Lunar Rock!

[@rcplaytime]

dude those jumps were epic 👌 😎

[@scalebuildersguild]

Thanks!

[@Marcoskicks]

More Rally Cars!!

[@wekitralph]

definitely getting kyosho fazer subaru rally car.

[@scalebuildersguild]

Enjoy!

[@jeremyofthejungle]

For plastic, that's a pretty serious truss going down the center. Still wish it had wheel wells. Not that I can afford one anyway, oh well.

[@toxicnerveYT]

Looks good. How does it compare to the Traxxas Ford Raptor R?

[@scalebuildersguild]

I don’t generally do comparisons, because it’s very difficult to replicate things precisely. I will say the body mounting on the Slash is better, but it has more plastic overall than the Kyosho does on its aluminum chassis. The Slash will go faster, and has more parts support. They’re both hella fun though!

[@CornholioMcGeeRC]

Yeah man facts of life reference!!!! 🤣😂🤣

[@scalebuildersguild]

You take the good, you take the bad 🎶

[@phildavis4878]

Absolutely beautiful truck but I would have loved it even more if they turned it into a trophy truck