if you look, it actually has little screwdriver symbols next to the three screws you need to remove to pull the pump grip, front end, barrel and spring out without getting all up in its guts. Somebody on the design team knew what they were about.
@TheGriever2112 Жыл бұрын
Actually, not all of them do. Mine did but a friend who got 2 from his local target does not have them on his.
@MrMemodrix Жыл бұрын
@@TheGriever2112 that is odd. Wonder if its different suppliers, updated design, or differences between printers?
@shadowl3gion6419 ай бұрын
Question is X shot and BoomCo any good I manly get nerf
@ThatDamnedTurk6 ай бұрын
@@shadowl3gion641 They both have great blaster products that rival Nerf. This X-shot featured in the video being a prime example.
@shadowl3gion6416 ай бұрын
@@ThatDamnedTurk cool thanks mate for the help
@ManovStyhl Жыл бұрын
When chambering full length darts, you gotta make sure the priming grip is actively pulled all the way back. The buffer spring pushes the dart pusher a little forward, right at the half length spot, so you gotta pull back the grip again if you primed and let go of the grip for full lengths
@danross1038 Жыл бұрын
No you dont
@sbcombopwnsnoobs61 Жыл бұрын
@@danross1038yes you do what? The dart pusher doesn't go back far enough for full lengths so you manually have to pull back farther on the prime unless you're slamfiring. Single shots literally require it
@danross1038 Жыл бұрын
@sbcombopwnsnoobs61 no you don't. Don't challenge me on things you know nothing about. I literally prime things all day. Amazon prime.
@muellmanni1678 Жыл бұрын
@@danross1038😂
@kbwarriors11 ай бұрын
@@danross1038that was a p good comeback 😂
@CaptainConArtist Жыл бұрын
Cracked plunger tubes aren’t just from use, the one I ordered came in broken 😅 probably shippings fault, but still shows it’s flaw. Luckily target sent me another without me having to send mine back. A little JB weld and gorilla tape on the tube and it’s working now, so now I’ve got two to go through! Fun fact: On tear down, I noticed the grip is attached to picatinny rail! Will make grip swaps pretty convenient. Also to note, the blaster is slam fire (don’t know if drac mentioned it)
@pv8685 Жыл бұрын
what a fail... you should have used flex tape for the repair 😂 hehe just kidding, congratulations to the free second blaster.
@ChungyCheese Жыл бұрын
There are also some metal plunger ube alternatives!
@sarahthompson9621 Жыл бұрын
That’s honestly genius because adding an alpha trooper grip would fix what most people complain about with the wobbly grip.
@RufusTheRed Жыл бұрын
i put a chainsaw grip on one just clears the rail
@okidsworldtv133310 ай бұрын
The grip is actually not that wobbly, everyone else is making it seem like it is the most wobbly grip ever
@Willis00788 Жыл бұрын
dan already spoke about it: no one ever reached out to him or talked to him about it, but it's different enough that it's not a copy, they do things different internally, the "orion" text is either a nod or extremally extremally coincidental
@JoeLaFon3 Жыл бұрын
Alot of the Foam Flinging groups I'm a part of have lots of people complaining about the plunger tube breaking easily. Some were broken right out of the box. Worth thinking about
@nickvencill7752 Жыл бұрын
Removing 3 screws is all you need to swap the barrel and spring. Alongside a little dremel work, a talon claw length K25, a 45cm lynx barrel, and a worker scar this is by far the cheapest and simplest way to get a 250 fps primary. It's kinda crazy
@user-nv1gm2zj7y Жыл бұрын
but the plastic is weak so upgrading springs will drastically lessen shelf life.
@MrBurningrubber Жыл бұрын
Im excited for this blaster because this is the first half length blaster we can get here off the shelves in the uk. Apart frol this it was obly import them which was just horrendously expensive. So its a big thing for us here in the uk
@richbuilds_com Жыл бұрын
Picked mine up a couple of weeks ago. I've already modded it (40cm barrel, scar, sights, front grip, paint job)! :D
@pok3fan12 Жыл бұрын
I got this blaster a couple days ago. I haven't used it in any actual gameplay, but just from shooting it in the backyard, it seems to work really well with ruby darts. Absolutely loving it so far
@Ezero8 Жыл бұрын
I think the design looks pretty good. But the main problem i have with X-shot blasters is that the build quality feels really cheap, which is why the price is so cheap. I rather pay a little more for a Dart Zone product that feels sturdier.
@RetroAlex1258 ай бұрын
The general plastic quality is definitely better compared to the traditional plastic they use. How ever only one quality issue is the plunger tube which can easily be replaced. This blaster is loved by the community and the modders
@kacymullen1515 Жыл бұрын
Castle Dracis back! I cant wait to get my hands on one of these and trick it out! Possibly with a FPS kit????
@davidlitchford7714 Жыл бұрын
The skins are awesome, the LOOKS of a blaster are VERY IMPORTANT. Performance matters too
@logansarty20079 ай бұрын
Gotta say Drac, i Love your Dogmeat shirt!! I'm getting a longshot soon and this video was very informative.
@NANA-fo5cr11 ай бұрын
I bought two of these, one I kept stock and the other i modded to 300 FPS for super duper ultra performance. Great blaster and the prime is ultra smooth, I love it!
@bretts1646 Жыл бұрын
I think the rail is begging for a carrying handle and riser, personally. The other mod I'd like to see that others haven't seemed to tackle yet is reducing the side to side wobble on the priming handle so it feels more sturdy.
@goofygoodpasture8511 Жыл бұрын
Mods I think would benefit longevity, aluminum/steel/brass plunger tube, run a metal rod through the blaster to stiffen it up or maybe replace the plastic rail with a metal one, and maybe a few other tweaks.
@notfeedynotlazy Жыл бұрын
17:20 You can fit 20 half-darts in that 15-darts mag. On the other hand, you can only fit 18 full darts in that 15-darts mag. But you are better with 19 and 17 to avoid jams. It is indeed not a bug nut a feature. Also, this thing feeds beautifully from the Buzbee 30-darts drum.
@faolan73 Жыл бұрын
The dart foam is different between the XSHOT and Max darts, to the worker darts. The worker ones have much thicker foam and a tighter ID, and are generally more durable, as well as heavier.
@ojrmk1 Жыл бұрын
I just got mine and the notoriously fragile plunger tube was cracked on delivery. But it's so cheap, and I love the form factor so much I've ordered an aftermarket tube and if I can switch it out without too much hassle I think this may be my very first mod project.
@jaemez3247 Жыл бұрын
The scar works even without the friction you re talking about because the dart is moving against the edge at any given time. While not slowing it down with too much friction.
@TheRealLemongrab Жыл бұрын
I have discovered that a Max dictator spring fits in nicely and will bruise people, shot my friend with it and he said it hurt, rolled up his pant leg to find a bruise already formed from the impact😂
@2003frontier4x4 Жыл бұрын
Getting into foam about two weeks ago caused me to get back into Borderlands 3. Playing Borderlands 3, makes me want to go shoot foam. Love the Borderlands analogy 😊
@sillyputtyable5 күн бұрын
The Sam’s club version comes with two extra mags and 400 darts for less than the normal one.
@TheUndeadslayer221 Жыл бұрын
This is one of few dart guns in which it is not needed to pull back the priming handle to insert the mag (safely, without damaging the mag lips). Also, those sights can theoretically be fixed in place with some bolts and nuts.
@edgardopereles9966 Жыл бұрын
Lord Drac great review. Thanks for returning to your classic review formula. About the Xshot Longshot. It is a great weapon for anyone starting to discover the half length darts and the one you share with everybody. The colors are amazing.
@fbssminis6997 Жыл бұрын
11:25 Dart Zone Half Length mags have Katana notches on them, and are still widely used :)
@wrxloonie Жыл бұрын
Perhaps with air pressure the foam may expand a tiny bit and fit the scar barrel better? Just guessing
@wildmangeorgesrcchannel69169 ай бұрын
i just ordered one. im new to foam blasters as an adult. i had a few nerfs as a kid in the 90s tho. this long shot will be my first primary
@arzael6666 Жыл бұрын
nice review! anyone else saw the ant crawling near his mic a 4:56 to 5:00 min?!
@OCNerf Жыл бұрын
Same foam across the hobby reminds me of pink foam stefans once upon a time
@user-tl6qg6cz5e10 ай бұрын
best springer ever made. change my mind. Ergonomics 10/10. Chrono 140 avg which is insane for a springer. Accuracy 10/10. Fun 10/10, Appearance 10/10
@TheyDontFwKzuki10 ай бұрын
Do u know the name of the gun?
@raedien7 ай бұрын
@Actionfigurecollet he showed the box at the beginning...it's the XShot Longshot.
@kerry848 Жыл бұрын
TLDW: yes Cheaper blasters means more potential to attract talent to the hobby
@RetroAlex1258 ай бұрын
Because of how cheap it is, you can spare money for after market parts
@dtbjason Жыл бұрын
I havent found a need to put a ton of 3d printed stuff on mine as opposed to my Nexus, its good as is for what it is for sure!
@drackgoon1375 Жыл бұрын
If you make a Halo DMR kit I will buy it
@jonahdesu Жыл бұрын
You forgot about the slam-fire feature.
@RetroAlex1258 ай бұрын
Underrated feature honestly
@dovahkendov2816 Жыл бұрын
4:55 How the heck can you just keep on going with an ant crawling around on your skin?! That would freak me out so much! 😱
@milosmods Жыл бұрын
Most of those plunger tubes were already broken as is as in right out of the box that's first there are all-metal parts for there are brand-new plunger tubes out you could get them from front-line like where I got mine or you could get them from silver Fox or other places It's not a bad Blaster I actually have one and I can enjoy it but I can also tell you I got 300 FPS out of my blaster It's not a direct copy of a lynx either so get that out of your mind That ratcheting prime is caused by the prime lock up top if you remove that lock you will not have that ratcheting prime it'll be a nice smooth prime like I said I run mine at 300 FPS
@Black_Francis Жыл бұрын
No, it's not a direct copy of a Lynx; it's a direct copy of a Taurus (the predecessor of the Lynx).
@AllinWhenPlaying Жыл бұрын
And by "entrance" as the gesture suggested, we mean "fisting" that Zuru is currently delivering to Nerf. For UK market this the only Dart Zone equivalent we can get without paying over $100 to get things imported. After playing with mods it really shows that it is inconsistent due to the plunger o-ring being very bad (classic Teflon tape helps a lot) and, especially after tefloning, the barrel length is insufficient.
@RetroAlex1258 ай бұрын
Considering i also live in the uk, this is a very good first primary, i picked mines up today and i definitely know i am going to have a blast!
@TeflonDave Жыл бұрын
Respect for committing to the bit for 24 seconds 😂 That's dad-level joking there.
@TheGriever2112 Жыл бұрын
Was wondering what happened to this review. But glad it made it and can’t wait to see what you come up with for it.
@brianpfouts2326 Жыл бұрын
Have one and got parts to mod it already however the spring i was gonna use is sold out so waiting for those to come back in stock. I may also be one of the 4 people that use katana mags cause before the trion came out I got 10 or 15 game face prime mags off Amazon for under 2 bucks each so 20 ish bucks for 10 mags ill run em all day long. I also like how he put a lynx right up against it and just is like I won't say it but......... budget lynx ? Lol
@adamaglionby7438 Жыл бұрын
Its a flip out jam door on the left side, not just a window.
@Danielsworlds Жыл бұрын
Orion has Said they were not consulted in the blasters design. And while that's probably true whoever did design it clearly has a hand in the hobby space as this Blaster has a lot of quality of life things that only make sense if you intend for the community to mod it.
@allencarey7336 Жыл бұрын
Was EndWar in Charlotte??? I live a frikin hour from there!!!
@splabooshkey3343 Жыл бұрын
The best thing about this blaster imo is just the fact that it's a pro blaster you can buy on shelves outside of north america for the first time in YEARS
@nicholasmazzarella2720 Жыл бұрын
Lord Drac. Awesome review. Thanks for the honest and face filled review.
@28unfinishedprojects30 Жыл бұрын
Dan had no part in designing this, but it functions differently. I don't think it uses the lynx turnaround. Also dart zone pro mags are katana geometry.
@dancarthen3634 Жыл бұрын
K25 40cm barrel Metal plunger tube Rachet delete
@Mandolorian1001 Жыл бұрын
I was hoping you would do a longshot bit, and man it didnt’t disappoint 😂
@SakiRGR10 ай бұрын
I can't this blaster to be available in Quebec, I even heard that it's not available yet in any Canadian tires, they're at the back appearently.
@SivaExperiment Жыл бұрын
for the darts. while it is likely that the darts come from the same factory its also likely that the factories these companies uses get their foam from the same supplier.
@ZoomJ74 Жыл бұрын
the half length mag has made mine jam quite severely through the darts struggling to feed from darts stacking strangely, often to the fact that i simply dont use the mag anymore
@anarki471710 ай бұрын
I picked one up in Smythes Toys here in the UK, my first blaster that uses half darts
@blaster-time Жыл бұрын
Is this the fabled "Sniper in Drac colors" you could (almost) get for $10 and a Maverick? 🙂
@shadowl3gion6419 ай бұрын
Question is x-shot and dartzon any Good 🤘🏻🤘🏻?? 7:41
@joelchen-q6y19 күн бұрын
do you recommend this or the aeon pro x
@a.9.u.fnoobgamer484 Жыл бұрын
Unfold the carboard and unscrew the plastic screws by hand instead of tearing them you monster
@chaplainjinx Жыл бұрын
Red or dead, sir. That's why. 🤣
@Midnight890 Жыл бұрын
I believe on Reddit the designer of the lynx said that he did not assist in making it.
@mhebert350 Жыл бұрын
of course he did not, those are 2 entirely different mechanisms
@FlyingKechup8 ай бұрын
dude you gotta try using that normal mag to shart length mag attachment on some different nerf blasters
@borq_345 Жыл бұрын
I want a pro line blaster that’s a shotgun. Maybe it could just take shells, or it could have 3 internal dart magazines where priming it chambers 3 darts at a time.
@turnersawman Жыл бұрын
Bro look into the fire fly from monkey mods. exactly what you are looking for. Out of stock for the moment keep eye out it comes around.
@gosshawk Жыл бұрын
I am just getting back into nerf, should I get one of these or a Nexus pro ? Edit: important to mention whete i live a longshots costs minimum 45$ and a nexus pro is minimum 75$v
@TheSybermedic Жыл бұрын
Thanks for the review, I was wondering when you were going to comment on this blaster. I picked up two, one I am keeping stock the other I have modded by adding a TC-K25 and a 40mm Kuryaka Barrel. The modded blaster is hitting around 205fps. I am concerned about the plunger tube and will preemptively replace both of mine with a metal one when they become available.
@richbuilds_com Жыл бұрын
Its a 42mm OD, 40mm ID plunger tube for reference :)
@Haplessstompy Жыл бұрын
I’d like to see a jolt rebarreled to shoot demolisher rockets
@MaroonCardinal23 Жыл бұрын
Actually didn’t know the stock could be adjusted, that’s pretty cool.
@robertfreeman6082 Жыл бұрын
You very quickly touched on mag compatibility in the outdoor segment but didn’t really say if this blaster will take existing standard Nerf full size dart mags
@moejitz Жыл бұрын
It does take most full-sized mags to include drums.
@ROTSTarge Жыл бұрын
I'm holding off for a blue one honestly
@EnderMaster707 Жыл бұрын
Pleeeeaaaase make a new plunger tube on foam pro shop for when we get it so it don't break
@BradMoore-uh7ez6 ай бұрын
When is Australia getting any of these half dart blasters n decent FPS
@paullassahn4641 Жыл бұрын
Doesn't the gameface prime have a katan mag, it's basically a ceda. It was released not so long ago
@notnuffnerf Жыл бұрын
Why yes, yes it is. 😉
@NightFury-jd8ce Жыл бұрын
Hopefully at Target here soon.
@dennisbyers1784 Жыл бұрын
You started young. Your color choice is very popular among the target audience. Strong correlation but not causation maybe
@RufusTheRed Жыл бұрын
stock with a real scar it's not powerful enough , even my modded one has darts get stuck in the scar here and there
@SaintTank Жыл бұрын
Which worker scar barrel fits this blaster?
@rmfberry261 Жыл бұрын
im one of the 4 lol. in all seriousness. i live in a small town with no wars and i haven't seen any reason in spending the money for talons. i haven't seen a talon in person and dont see why they are the favorite.
@ayu5tails Жыл бұрын
in the Philippines, this sells for about 60usd.
@JacobHGamez Жыл бұрын
Cool
@avj_mod5104 Жыл бұрын
You should compare it to the Taurus not the Lynx. :D
@MalSint Жыл бұрын
4:57 anyone else notice the bug crawling across Dracs chest?
@willco5431 Жыл бұрын
Drac you don’t known the colour red 😂
@DesertFox0420 Жыл бұрын
Ya don’t have to worry about blue anymore 😅
@rcjoe40611 ай бұрын
Do tell kind Sir what was the high end red blaster you held up to compare?
@raedien7 ай бұрын
That's his personal Lynx. It's a fantastic blaster designed by Orion industries. Drac's shop sold two batches with some of his own parts. If you want one, and I do recommend them, SilverFox sells them as well as Out of Darts.
@rcjoe4067 ай бұрын
@@raedien Kool thanks I'll check it out
@stevegeary8018 Жыл бұрын
So this explains the absolutely bizarre Nerf commercial I got advertising the “cs-9 longshot” as a legacy blaster.
@japyoo22485 ай бұрын
This or nexus pro?
@xr8dmoose135 Жыл бұрын
What is the black and red blaster on the wall behind drac?
@raedien7 ай бұрын
That's a Hummingird. Drac's team designed and sold it for a bit but it has been discontinued for quite some time.
@jolemaire6629 Жыл бұрын
Has some great new features that will now be available to mass retail, but qualitywise it's not that great. Having the lowest price is not always the best option.
@another39973 ай бұрын
And having something people can afford is often better than having nothing at all. 😉
@RabW70 Жыл бұрын
Mod guide on route??
@DR-gy2lv4 ай бұрын
Bro pulled a coop727 with it comparison with the worker gun
@MrFreefonix420 Жыл бұрын
They got the heads up from the guy to use orion
@Capro108 ай бұрын
Link?
@eliasaittola6678 Жыл бұрын
It has slam fire
@bagusnugraha27878 ай бұрын
In Indonesia, this sells for about 100USD no cap
@misellus3931 Жыл бұрын
literally EVERYONE EXCEPT HASBRO is stepping into the pro scene they are actively losing to the competition intentionally at this point
@zephusdarkside3652 Жыл бұрын
The pusher in mine shattered within 3 days of me opening the box.
@saltytroopa6578 Жыл бұрын
It's the QBZ95 of the hobby
@Jay_M_See Жыл бұрын
HA HA HA! "I'm not gonna say it"...
@R_L_Joker Жыл бұрын
got mine and added a few things
@mattorama Жыл бұрын
Why is full length magazine and Katana compatibility still a thing? I asked the same thing three years when the Nexus Pro came out. I've never looked at my Worker Harrier and thought "But if only it could accept full length darts!!" It's legacy tech, time to bury it. Target doesn't even sell full length darts to use in these things!