Doing A Make Over/Maintenance On My Suzuki Gsxr

Follow me on:
/ spunky_boyy
Suzuki Gsxr 600 Make over/maintenance day..In this video I am giving my Suzuki Gsxr 600 a touch up that includes replacing the side carbon fiber panel piece that was cracked and is now fixed. I also repaint my M4 Exhaust and show the process of sanding, priming, and painting! Towards the end of the video I lube the chain and also give the motorcycle a good cleaning and give the paint a good wax. I also put tire shine on the tires of the motorcycle(I don't recommend doing this) I accidentally get tire shine on the wrong part of the tire and I have quick solution to resolve that by doing a burnout at the end of the video!
Links:
MID PIPE: amzn.to/3avadmy
M4 Slip On Exhaust: amzn.to/3PmqVmJ
K&N Air Filter: amzn.to/3Iv3Dc6
Gloves: amzn.to/3asvHk1
Camera(GoPro): amzn.to/3o1K2qo
Moto Vlog Mic: amzn.to/3IxSO95
Wireless Mic:amzn.to/3C1nTkh
0:00 Intro
0:49 Side Panel Replacement
2:14 Removing Exhaust
2:27 Exhaust Paint Prep
3:39 Painting Exhaust
6:38 Lubing Chain
6:57 Cleaning Motorcycle
9:01 Burn Out
QuadLock Cases/Phone Mounts➡️SpunkyBoyy10
(10% Off Any Purchase)
Song:
www.epidemicso...

[@jonpeters5194]

Spunky Tip - apply chain lube to the inside of the chain and the centrifugal force will carry it to the outside - that's the theory any way - On the other hand the rotation of the chain will move the lubricant around the o rings if applied to the outside so just get some lube on the cleaned chain - good job.

[@SpunkyBoyy]

Thanks for the tips! I’ve heard of a lot of different ways to do it. The main thing is like u mentioned just make sure it gets on the chain thoroughly. Thanks for watching and dropping some info! I appreciate that

[@TheWWWDEATH]

Each video gets incrementally better, keep it up Brent. You’ll be at 100k before you know it, just watch

[@SpunkyBoyy]

Thank you very much! Glad you’re enjoying them and haha maybe one day.

[@WhatsReal401]

Gsxr is so clean and sounds nice 🔥🔥🔥🔥🔥💪🏾💪🏾💪🏾

[@pinoy413]

Hoping to pick up a k5 750 this weekend. Thanks for all the good content. Id be lyin if I said I wasn't influenced by this channel a little bit lol

[@SpunkyBoyy]

Good luck with the bike! Thanks that really means a lot to me, and I’m glad you’re enjoying the vids!

[@Coremaster211]

Very nice! Exhaust looks great again and loved the burnout at the end! I got some oil/chain cleaner for my bike, so going to do some maintenance on it this weekend. Keep up the great vids!

[@SpunkyBoyy]

Thanks! That was actually the first burnout I’ve done on my Gsxr or a sport bike in general haha feel like it wasn’t too bad! Hope ur doing well and thanks for watching!

[@advancedmaterialtesting9635]

Awesome video bro!

[@SpunkyBoyy]

Thanks!

[@Bk-vz7qf]

Love the videos

[@SpunkyBoyy]

Thank you!

[@Rettungssocke]

Nice 🏍🏍✨✨

[@SpunkyBoyy]

Thanks!

[@terryissitt2118]

Always enjoy your videos Not so sure about the tyre shine though.

[@SpunkyBoyy]

Thanks! Haha I wouldn’t recommend it

[@nb6065]

I was using WD 40 just like u same bike but750-2018, until it caused the kickstand sensor buts to rattle loose , riding uphill kicking down to first gear before a curve the engine shot off Scary but never fell off so just check those two kickstand sensor bolts maybe put some Loctite 🤓

[@hurricane5677]

Be careful with clearcoat, It can yellow up from the excess heat, not sure how it looks over black tho.

[@XxhornetsxX]

i’ve heard mixed things about using wd40 on a motorcycle chain.. do you use it for cleaning or lubing ?

[@SpunkyBoyy]

I wouldn’t recommend using it..I only bought it because the day I was going to buy lube the motorcycle shop was closed. That’s not regular WD40 that’s gel lube WD40, so it works but not the best option. Whenever I clean my chain I use kerosene it works really well.

[@XxhornetsxX]

@@SpunkyBoyy oh ok cool thanks man! appreciate the helpful info as always 😁

[@danielwood5510]

are you wearing a wig?