Dolmar 7910 on NOS - John Reilly

[@HalliGalli69]

Genau die richtige Hose für sowas. Und auch die Schuhe. Einfach top

[@Entity_BlackRed777]

INSANE!!! Love that sound!!!!

[@IndianaDoug]

I knew I’d find something worth watching on KZbin

[@THEMOWERMEDIC1]

Right?

[@thesmallwoodlot433]

And this is all it took!lol

[@carlsnyder7354]

Nuvioj

[@starkenterprises2371]

@@thesmallwoodlot433 ha!

[@mr.anderson9938]

What a waste

[@justinhiggins2210]

Did it lean out bad enough to require a second fuel line, or were you able to compensate with the carb. Either way that is a bad ass machine.

[@michaelmetz9198]

I just started using a dolmar 510 ps to keep the roads cleared when I tend my oil wells and I'm quite impressed..as soon as it starts it ready to eat wood lol

[@warrenfloyd1484]

Love a well tuned 2 stroke!!!😎

[@VinaX2R]

Ride or die, one last ride, family. Domenick Touretto would be proud. Nos!

[@FlukeTog]

Best internet I’ve seen this year. Fast & Furious Dolmar II ? When’s episode 2 ?

[@treyharlan8289]

a tip : you can watch series on KaldroStream. Been using it for watching loads of movies these days.

[@brunotaylor4872]

@Trey Harlan yea, have been using kaldroStream for years myself =)

[@leandrojason1387]

@Trey Harlan Definitely, I've been using kaldrostream for years myself :)

[@lagoonrd4173]

Fast and furious 😂🤣😂 part 25

[@starkenterprises2371]

@@treyharlan8289 wouldn't load for me.

[@PawPaws_Place]

That’s pretty kick butt. Very nice set up. 🙌

[@twostrokeandsawdust]

That is bad ass! Can you give me some detail on how the nitrous system works?

[@fearlyenrage]

You inject the NOS in the airintake. That works primitve on a ongoing gas inflow 1liter per minute or more and when you are done you close the valve to stop injecting gas. No rocketsience.

[@fearlyenrage]

He has mounted a magnetic valve to the CS trotle so when he hits the gas the NOS will be injected. He could bore a hole in the injectionchamber or deliver it over the airintake.

[@johandepari4050]

@agus robert wajib punya modif yg sperti ini biar nambah koleksi haha

[@Toxic2T]

That poor chainsaw is begging for a proper expansion chamber

[@omnomnom11122]

I'm ignorant but curious; could you elaborate?

[@Toxic2T]

@@omnomnom11122 A custom exhaust unleashes it's true and full potential. The current one is definitely clogging it.

[@joshmonroe2562]

@@Toxic2T Clogging? How about restricting.

[@Toxic2T]

@@joshmonroe2562 Both.

[@acesegura0694]

Dang, got to keep that chain on so you can do the second cut, damn that was fast

[@Pavel_Tomson]

Так сильно разогнал пилу что даже цепь слетела:))) Походу переборщил с закисью азота:)))

[@mvblitzyo]

Hot sauce ! holy crap that was Flippin awesome ..!

[@bubbaray575]

Nick Dundee, "That's not a chainsaw, now THIS, THIS is a chainsaw."

[@pejuangrupiah2277]

☝ awesome uncle not even a minute 💯👍

[@VesselofMercy100]

Something told me the extra torque would be a chain stretcher…. You can technical stretch a chair by putting to much force in the handle and not letting the saw do the work.

[@starkenterprises2371]

Thank you for the info, it didn't occur to me, from a novice cutter.

[@joshuadarden7200]

Heads in that motor are toast

[@aggrobert8490]

Oh nooo another sword is glowing 🤣 Verry impressive

[@TheJonsberg]

Awesome chain, brother what did you do to it? Blessings

[@Pappy63]

I want to see one with a supercharger or turbo

[@Bordberti]

2021, die Holzbalken sind wertvoller als diese Motorsäge.

[@spencerstone9734]

Awesome running saw but could use a good hand file sharpening I heard a square file will make that thing shoot noodles

Wtf, hell on earth this saw cheers friends from Romania.

[@sulodjohn7679]

Wow.. very good.. very nice.. 👍👍🤝🤝

[@southernlife251]

With today’s lumber prices as high as they are, I bet you are really regretting wasting that fine timber just to show off that saw. 😂

[@dancearoundtheworld5360]

Prices dont matter when you got a tree you need down

[@starkenterprises2371]

@@dancearoundtheworld5360 apparantly in about 6 seconds!

[@ambushb0y]

But nitrous chainsaw...

[@MathieusChainsawCarvings]

probably needed to be that length for something,

[@SteelCowboy]

Gotta love assumptions

[@jaimecornejo2185]

I know its a stihl bar but why is it dark gray?

[@sapipoel]

Brilliant

[@woofy548]

i need more of this

[@MatzeMaulwurf]

Nice safety trousers!

[@ryanatkins4293]

Jesus that saw is hungry just threw the chain no big deal 😂

[@dcvariousvids8082]

Dear gods and little aces!

[@drowe387]

What does the 7910 sound like

[@HOTSHOT-ls1bc]

Wonder the street value on that lumber

[@acureone987]

What size bottle for the gas? That shit was crazy fast

[@glowytheglowbug]

Amazing and good

[@Марсель.8]

На газу?

[@brettslawnandtreeservice]

Real nice 7910 you got there. Thing was so hungry it threw the chain.

[@LongBinh70]

Um, NOx, not NOS?

[@okatexoffroad1813]

Bro I only say this because I've seen a chainsaw eat a leg. Get some fucking chaps, running a high speed saw like that.

[@HollyBoni]

Nonsense JUST SEND IT!!!!!!!!!!!

[@andreasbruns429]

Safetytrousers help at smalltalk Chainsaws the big ones with higher chainspeed go throu the safetygear.

[@julianstadelmann5043]

Que pasó con la cadena?

[@legendarypillow1450]

That was damn fast

[@sgtmiklin]

Explosion imminente 🤣🔥💥

[@Redbull661]

we did that on a saw :) kzbin.info/www/bejne/g6CmgomLaJ6Hfrs

[@Brullie88]

Why stihl sword?

[@vintagemotoseattle]

Poor fellows in the midwest have to buy blocks at Home Depot to cut with their saws

[@Redbull661]

haha nah. we were in TN and I didn't see any home depots. Seen a saw mill though.

[@Sensei948]

@@Redbull661 Oil mix 1:33 ?

[@Sensei948]

@@Redbull661 Master, can you pour 33: 1 husqvarna ls + into the saw 372xp 357xp and scythe 545rx? Will the piston rings get stuck with carbon?

[@SteelCowboy]

🤔 never been to the Midwest apparently 🤣

[@diyguybz6191]

That's awesome. NOS increases the percentage of oxygen going in to cylinders, which means you turned up the fuel too right? Eats more fuel. Cool. 😎

[@BM205]

Fast saw buddy! I was kinda shocked to see ya run it without chaps and gear on. That thing would do a lil damage if it got away from ya

[@icescrew1]

I had a big Stihl attack my leg. The ONLY day I hadn't put chaps on first thing. Just barely knicked my thigh bone. Thank god it was only a 3 mile hike out thru aspen dead falls. Dumbass me. No chaps.. no big saws.

[@BM205]

@@icescrew1 sounds rough man! A friend of mine had a similar experience. He's been in the woods his whole life and decided to get a Stihl tattooed on his leg well I don't guess his saw liked it cause it eat him up and he lost a good bit of his new tattoo. He wears chaps now too! Glad ya made it outta the woods ok. Y'all stay safe and God bless

[@TELOYSTV]

Nice one 👍👍👍👍👍👍

[@I_also_like_sirens_hehe]

Now put a Dayton 2z463 on NOS!

[@B8888Y]

I hope those nice posts were cut to a size and not for the sake of a video

[@jaydee2620]

Why cant they just come like that from the factory ??

[@sandorboganyi1378]

What chainsaw is that you fall the chain?? Oata fak*

[@thedolphin5428]

But why? If any machine is made for a particular kind of fuel by manufacturers (who have spent many years designing and testing it) why mod it to destroy it quicker?

[@starkenterprises2371]

Fun.

[@SteelCowboy]

🤣😂🤣 most ridiculous thing I’ve heard

[@wayongrahamjr6120]

I'm sure it's his play saw! With all Hobby's it's about having fun and building the baddest around! Keep it Strokin' & Smokin'...!

[@MartyInTheWoods]

John has a different cutting technique than most other guys. It's like seesaw style... Why is this technique faster?

[@Chevron.Muskoka]

Its a way of keeping the saw up on the powerband if its falling off under high load. Wouldnt have to do that in a single round log

[@danowen9142]

You maximize your cutting speed by keeping more of the chain in contact with the wood during your seconds of run time.

[@brettblack7049]

@@Chevron.Muskoka are you saying the chain wasnt set up well for that saw.

[@Chevron.Muskoka]

@@brettblack7049 I have no way of making that assessment over the internet. My response was to the question asked.

[@reillystsb]

I think it's because the saw is on nitric oxide that's probly why he does that.....

[@martinrichter6392]

Holly Shit, must have

[@MrCrashsystem]

I Live My Life a Quarter trunk at a Time

[@повелительадсскогоменала]

Че так быстро

[@lanceboyett9034]

Pro Street log cutting. Who knew.🤔🤣😂💪💪

[@bobfry7543]

BOBSQUATCH GIVES 666 TREEKNOCKS!! BADASSERY!!!

[@nicola4230]

Brutale 😁🔥💥

[@richardf9137]

Cool Beans!

[@damienreisner2183]

Very practical

[@JoeDavis82]

Holy Batman!!!

[@treefiddy2470]

Too soon, junior.

[@henrydexter3043]

Now imagine if the claim was sharper

[@ТоляКуць]

Так вот он, двоюродный брат лысого с Форсажа

[@big_mike_nyc]

And I thought 2 strokes didn’t respond well to nitrous!!?

[@fabzacres-blackcat]

ANY engine responds well to nitrous IF properly set/up

[@yasarbaglan8840]

çam ağacını bulmuş talaş gibi her motor keser onu

[@SteelCowboy]

🤣 should see my buddies triple in his snowmobile

[@chrisgrayston1982]

Do it on decent timber rather than poplar

[@dzmitriyshuliak9229]

Что за балон с газом?

[@Revurr]

Закись азота.

[@HitLeftistsWithHammers]

Yes.

[@cipofly]

beati voi (usa) che avete una tale disponibilità di ottimo e prezioso legame .

[@Wanous-hv7zo]

Must be a oregon chain

[@antowijaya7482]

👍👍👍

[@hphillips7425]

Nice 👍🏻

[@animaltube2283]

That’s cool 😎 I can show you how to cut it in half

[@Andre_Thomasson]

This is my dream lol

[@ad.ascuns]

Explozie filmată în slow motion !! kzbin.infouegegq6p65w?feature=share

[@jasonorlowski1775]

Yeah Love seeing the Dolmar at work nice. Even with a stihl bar lol.

[@J-unit84]

Damn that thing's still a beast though

[@johnnymontana2536]

Imagine if it were to kick back.

[@muhtesemicatlar6467]

Nos mu yok artık 😂💪

[@xisleprez]

Wicked!!

[@111000100101001]

Saw’s got alotta pickup

[@RomuloTDI]

De lo que dure el piston y el cilindro ya mejor no hablamos, no?? jajajajajaja

[@TVHM]

Wow

[@FDEE30]

Fuck yes

[@สิริวัตรพาขุนทด]

โหด

[@dieselteen0770]

NOS The fuel makes engines on crack

[@horaciovalentinmoraleiva779]

Yo quiero una motosierra asi saludos desde coyhaique chile

[@fraud3647]

Lumps drop down hell fast....

[@michaeldougfir9807]

When you cut a couple inches off the first two cants that was performance. When you cut a few feet off the second two, that was a waste.

[@Notyourphone.]

Everybody's got shit to say. Did you ever think about the fact that he just made all four the same length 🤔 kind of common in construction 🙄

[@richwillson1631]

👍💪

[@sun9912]

Yee yee

[@tomeksroka4350]

Toś narobił jak Kot W Piach....

[@jonathonbridges9625]

Because Murica!🇺🇸

[@Tierretter58]

Mit Stihl Schwert 🙈

[@BillyP-49Chevy]

I'll try anything once with nitrous

[@stelianjuncu8261]

Ce dracu e aia? Nu se rupe ambielajul?

[@dennisgood2887]

That thing runs like a husky

[@ilan6317]

Lost ya chain bro