They make great how to videos on their YT but seeing this will make me think twice if I ever needed to order parts from them
@wendwllhickey6426 Жыл бұрын
That's what happens when you use no name o2 sensor
@tomoakhill8825 Жыл бұрын
I about died laughing. This just hit me at the right moment. Comes "pre-rusted" from the factory. That way you do not have to wait for winter road salt. In this case the manifold will match the other parts in the car.
@chrisfreemesser Жыл бұрын
That manifold was atrocious...apparently the word "dessicant" doesn't exist in Nissan's vocabulary
@clintshiplett8548 Жыл бұрын
I work in the metal finishing industry and you'd be mortified to know how many automotive parts come through our plant because they sat on the shelf too long and were deemed too rusty to install. And they rusted NASTY. So they send them to people like us to clean up the rust so they can be used. How many rusty parts got put on your car because it "wasn't TOO bad..."
@kingofl337 Жыл бұрын
I wish he would have hit it with high temp paint. But being a Nissan it probably only has a few years left.
@OcRefrig Жыл бұрын
That “ NEW “ Exhaust manifold looked awful ! I would of returned it , But maybe no more are available for weeks. Who knows. Might of had to use it. Might have been nice to hit it with a Glass bead blaster real quick & Throw some High heat paint on it. Cars probably a beater though , just needs to get back on the road. Maybe a Wire wheel & a little high heat paint real quick. Life’s not perfect ive found. Sometimes u just gotta do what u gotta do.
@kenk8072 Жыл бұрын
I used to work with a guy who would always say "cross threads are better than no threads". This video makes me think more than one person has that same thought.
@gillgetter3004 Жыл бұрын
I saw where four bolts with nuts were cross threaded on a bridge column!! There were eight bolts on the one column end. Stopped the job and took all ten columns out and replaced all bolts and nuts!!! Engineer was appalled that happened!!! Nobody owned up to it , took a week to fix. He stopped the job for a month and inspected every tie on bridge
@markh.6687 Жыл бұрын
Or same lack of thought. Especially if they never had to fix their laziness.
@DARTHFEAR0N Жыл бұрын
Cross theading is better than lock tight 🤣🤣
@theDunn05 Жыл бұрын
Cross threaded or torqued to spec - tight is tight. 😂😂
@stevenrice47 Жыл бұрын
I would kick him in nuts. Then yell "Crushed balls better than no balls!"
@Panellll Жыл бұрын
"i'm perfectly honest most of the time especially when I'm not telling a lie" subscribed
@NikMitchell Жыл бұрын
No worries on the missed welding opportunity - gotta take wins when you can get ‘em!
@ColtRacersGarage Жыл бұрын
You're absolutely right. Bought cheap O2 sensors a while ago which died 6 months later. Got them replaced under warranty, the replacements lasted another 6 months. I then bought Denso, problem solved, money light never came back.
@matthewpeck4016 Жыл бұрын
I am endlessly impressed with your drive for best-possible outcomes. It's not about some predetermind process or policy, you're just trying to get the best outcome available in the circumstances. You're the rarest, and my favorite, kind of person.
@guyconnell2250 Жыл бұрын
"Don't put it in sideways." That advice actually applies fairly universally....
@cecilkorik Жыл бұрын
BMW Engineer: "I wonder if we can make it so they have to put it in sideways..."
@jasonkarov2 ай бұрын
@@cecilkorik BMW engineer #2 "Let's also put it on the firewall side of the block, below 2 other parts, make it inaccessiable completely, and then put it in sideways
@markm00005 күн бұрын
@@jasonkarov BMW engineer #3 now let’s make it entirely out of plastic and one time use connectors.
@gordonliddy9418 Жыл бұрын
Thanks for fixing this customers bunghole.
@markm00005 күн бұрын
Hahaha 😆
@privateer0561 Жыл бұрын
Ripped the bag on the assembly line, left the shipping container door open on the way over from Japan, dropped in in a puddle upon arrival at the dealership, and put it on the parts shelf next to an open window until today...
@wildbill23c Жыл бұрын
Its pre-rusted to match the pile of crap car its going into...nice of Nissan to make their new parts look like the 14 year old part that was just removed....that or Nissan just sent someone to the pick a part yard for the part, bagged and tagged the new old part as OEM new and called it a day, and charged new price HAHA!!!
@markh.6687 Жыл бұрын
Sounds like a transmission supplier whose 'out of the country' factories left sub-assemblies outside in rain and high humidity for a few months, then shipped the rusted assemblies back to the US factory as 'defective parts'. I understand the meeting blaming the US employees almost got out of hand, and the later meeting apologizing to them once the truth came out was...interesting.
@davetaylor4741 Жыл бұрын
Living in the salt belt you are used to rust. I also lived in a road salt area. And on top of that near the sea. Quite close to where the car transport ships came in. Along that section of coast. Right on the waterfront. Miles of compounds of new cars. At best lashed with salt spray. At worst in bad weather. Sitting in salt water. I would watch the trucks skull drag these new cars up onto the bed. Wheels frozen up or brakes locked on. Or both. Exhausts red rust. Bottom of the car red rust. And a few days later the proud new owner could be driving out of the dealer with a cosmetic time bomb. And we are talking thousands of cars like this. I bought one new car back in the early nineties. Within weeks things were showing rust. Sold it after 18 months for a song. Total rust bucket. Where I live now. I don't miss the rust.
@tomoakhill8825 Жыл бұрын
I love this video. The cross-threading is world champion quality. Never seen anything that bad.
@jeffryblackmon4846 Жыл бұрын
Keep looking, you'll find one or more. Great comment!
@MrLangobard Жыл бұрын
''They freak out when brake cleaner gets into catalytic convertor but will douse 14 cans of fuel treatment and 6 cans of SeaFoam''. I almost took that personally :D :D :D . Great video!
@goodcitizen64 Жыл бұрын
My wife took her Toyota Highlander XLE V6 to the dealership where we purchased it for the same similar problem plus a few additional issues, it was a few months old and still under warranty and apparently because she's a women they didn't fix any of the problems. The so-called technician just cleared the codes. It was running even worse by the end of the day! I ended up filing complaints about the situation with my wife's Toyota service, which resulted in his firing. I still had to take the vehicle to another dealership that was over 100 miles away from our rural West Texas home! It was well worth the extra drive because the dealership was so much better and taking care of the customers! I'm a disabled veteran and haven't been able to wrench since 2001. It's such a hard thing not to be able to work on our vehicles as I once had!
@eworks9828 Жыл бұрын
Thanks to your advice I have done a couple things lately. First I purchased my own new catalytics from magnaflow and the O2 sensors were OEM purchase. 2nd, I found a new small town garage that will work with customer supplied parts. My old garage said they will not service vehicles that use parts supplied by the customer. My vehicle has almost 1/2 million miles on it and I HAVE to use a mixture of junk yard and other creative supplied parts to keep her going and I am NOT putting dorman parts on it period. I have learned a lot just from watching your videos, not always understanding everything going on but learning some lingo and knowing what to avoid is invaluable, thanks for the content!
@Bellboy40 Жыл бұрын
And today you learned not to get your auto parts at Dollar General. 😂
@zzschulzz Жыл бұрын
Definitely not a stupid video. It really helps to see what happens in a real shop.
@lvsqcsl Жыл бұрын
I changed out all 4 oxygen sensors on the Marquis and bought a thread chaser just in case. At 450,000 miles they were pretty well used up. You would have been proud, Eric. They were OEM. Great video!
@mikereilly5930 Жыл бұрын
They should be good for another 450,000 miles. It's not a wagon is it?
@Paul1958R Жыл бұрын
What year/engine Marquis?
@Amerikanskis Жыл бұрын
@@Paul1958R almost certainly a grand marquis which is a crown victoria
@lvsqcsl Жыл бұрын
@@mikereilly5930 No. It is a 1996 Grand Marquis LS. I think the last year for the wagon was 1991. I have an aunt that owns one of those. (1991 Mercury Colony Park station wagon.) It's a very smooth riding car!
@lvsqcsl Жыл бұрын
@@Paul1958R It is a 1996 Grand Marquis LS with the Handling and Performance package. It has twin exhausts good for 210 horsepower. It was a demonstrator and I bought it for about $3,000.00 off sticker. (Which was about $26,000 at that time.) It is no stormer, but it does get the job done.
@318ishonk Жыл бұрын
Thanks for taking the time and putting the parts all on that table for us easy to see. Very nice of you Mr. O.
@annyer262 Жыл бұрын
I agree about not using parts from the dollar general. However I have used plastic bottles from the beverage section in an Australian supermarket. The 1 litre orange juice bottle makes a good coolant recovery bottle for a 1969 Rover 2000. Drink the orange juice, give it a rinse out and you are good to go!
@mikeheintz6861 Жыл бұрын
Life hack for never cross threading anything: spin the bolt backwards. The very first thread will make an audible click when it passes over the very first thread of it's female counterpart. Then reverse direction. Doesn't matter whether it's iron pipe, an O2 sensor, pvc, or whatever else. Anything male and female threaded, because it all works the same.
@bertgrau3934 Жыл бұрын
One thing I like about RockAuto, you can get the cheap stuff, or most times they offer the factory stuff as well, so you can take your pick and usually get a fairly decent price
@EverydayMan83 Жыл бұрын
Great video. Your commentary keeps me coming back 😂😂😂. It’s been said that “quality pays not costs”. For this customer he had to pay twice. Great video from a true professional.
@jeffryblackmon4846 Жыл бұрын
Dollar General as a part store- wouldn't surprise me if they take your thought and start selling auto parts. Make certain to get a commission! Thanks for another interesting video, Eric!
@Manofcube Жыл бұрын
The used to sell engine oil that didn't have any additives in it and it blew some people's engines up. In the end the jury didn't think the "Not for vehicles 1930 or newer" on the back of the bottle was really a sufficient warning lol.
@jayjudd6518 Жыл бұрын
Great job solving the thread problems.
@Cronin149 Жыл бұрын
In some ways I feel I learn more from these videos than your detailed ones. It is hard to teach what not to do and what to look for. Great job!
@Latarian_HoodRat Жыл бұрын
LOVE IT!!!! Even a short video is better than none. Thanks!
@keithfork8663 Жыл бұрын
Lots of good information in a nice short video. I prefer short as time is limited.
@slagmaker6780 Жыл бұрын
You are the most honest ding dong I know.... aways find your content the best! Keep up the good work!
@mikeberry304 Жыл бұрын
TRQ , stands for try and run quick , why do people try and do our job and do it crap , I will tell you why, coz they ain't got a clue , nice job Eric , another special tool made 🤣🤣💪💪💪👍👍👍
@tomtheplummer7322 Жыл бұрын
Almost an honorable mention on Just Rolled In. 😆
@jdtractorman7445 Жыл бұрын
You just got to love the new rusty manifold. It's surprising they don't put something on those to protect the metal like they do on brake rotors.
@thomask4836 Жыл бұрын
Eric! You sounded pretty feisty today! Good for You! ! ! ! ! !
@michelswerissen6544 Жыл бұрын
Nice to see an honest mechanic fixing a dishonest hack mechanics work, video approved, click.
@JimmyDean404 Жыл бұрын
he's ahead of some people. At least he has a catalytic converter!
@michaelslee4336 Жыл бұрын
Well at least the housing, who knows if it had the good bits inside.
@WilliamMulligan Жыл бұрын
I haven't watched it yet but I already like it.
@darylmorgan9887 Жыл бұрын
No matter what Eric always a pleasure to watch what you do.
@geoffrundlett1697 Жыл бұрын
I loved it Eric; thanks for sharing!
@illreportbackinabit.8514 Жыл бұрын
It takes all kinds of effort to crossthread coarse threads, give that shop some credit, what they did is very very difficult.
@ericbrenner690 Жыл бұрын
I tend to cross thread every bolt I run across, course or fine thread.
@crazyman8472 Жыл бұрын
3:18 “And you know me, I’m perfectly honest, most of the time…especially when I’m not telling a lie.” 😜
@JBreeze4598 Жыл бұрын
And stacking could affect the stream geting to the sensor
@goodcitizen64 Жыл бұрын
Great video, brother. Well done and educational experience everytime!
@iamnoone. Жыл бұрын
When I was young living in Michigan my dad used to buy his parts at a pharmacy. It was strange because you picked up your prescription and a starter or water pump at the same time
@robertdonaghy8780 Жыл бұрын
Love you videos and your personality ! Great techniques and how to run a honest shop
@dennisharvey4499 Жыл бұрын
Certainly worth posting: seeing the special tool and the thread tapper encouraged me to buy a thread tapper.
@johnhufnagel Жыл бұрын
advice I always (try) to follow: use the right spark plugs use the right coils use the right sensors like you said, if you don't want to pay OEM prices, at least get OE. It's generally not hard to find out who the OE is/was.
@ocdaddvids Жыл бұрын
I've been super lucky getting those sensors out by running the vehicle until its real hot and they are usually easy to remove as long as you don't have to reach around that hot exhaust.
@markh.6687 Жыл бұрын
So, you're saying no hot reach-arounds for you. Take notes, people! :)
@samholdsworth420 Жыл бұрын
I usually just take a wrench and untighten them because I live in Southern California and they're never rusted
@cheesecurd100s Жыл бұрын
I hit every single one with a torch first, but I also live in the armpit of the rust belt
@ocdaddvids Жыл бұрын
@@markh.6687 awesome. Funny shit right there!
@Dstreet370 Жыл бұрын
@Sam Holdsworth I was gonna say you're lucky, but then I remember california sucks 😂
@flynlr Жыл бұрын
funny I ordered aftermarket Bosch 02 sensors for my Nissan. New OE NTK parts were in the boxes
@karlgoebeler1500 Жыл бұрын
Caught the message Taking care of MOM at the moment. Thanks for the offer. (Shes 88 heading for 89)
@phprofYT Жыл бұрын
"When I"m not lying, I'm honest. Honest." Famous words of a 5th grader.
@fredsimmons2793 Жыл бұрын
Salute Eric and Mrs. O .That split socket to accept that harness to tighten sensors is rightous.I always end most of the time using a monkey wrench with a length of hollow pipe over the handle for leverage to breaker the sensor loose
@Waccoon Жыл бұрын
A friend of mine took her Subaru Forester to a body shop after a collision. When she got her SUV back, the left bolt holding the rear hatch was not only stripped, cross-threaded, and sticking out about a half inch... it was more sideways than a Japanese drift car! I couldn't believe what I was seeing. Sometimes, you wonder more HOW they manage to do these things at all, let alone how their standards can be so low.
@Graham_Langley Жыл бұрын
Got a car back from the insurer-nominated coachworks after a not-my-fault collision with, along with a broken door speaker, scratched glass and lots of other issues, the passenger upper seat belt fixing bolt stripped. I was not at all happy...
@bellcobra4 Жыл бұрын
wow love all the vids thank you for sharing and not dragging out time and showing only what really needs to be done. I have learned a lot watching your videos .... i grew up in the sixties where you could remove and replace a engine in a couple hours under a texas shade tree with friends helping and lots of beer " Haha."
@kevinbyrne4538 Жыл бұрын
1:42 --- TRQ -- TRQ Auto Parts' headquarters are located in Pepperell, Massachusetts. Their major production plants are located in Guangzhou and Shanghai, but they also have production facilities in India, Mexico, and the United States.
@wadepederson8457 Жыл бұрын
Did someone forget the copper antiseize ? down the road a few years someone is not going to be happy ( if) they ever have to replace them, oh sorry I didn't mention anyone's name,getter done, rock on ! If you can do it I could hurt myself, I just have to stay away from the BFH those tend to hurt, great videos keep um coming !
@alskjflaksjdflakjdf Жыл бұрын
I put non-OEM o2 and afr sensors in my Prius. Even though my OBD2 scanner showed they were responding, the fuel trims were way off and the car ran like crap and would eventually throw a check engine light. Someone on the prius forums suggested using OEM sensors which I didn't have money for at the time. I ended up getting some OEM sensors at the junkyard and they worked perfectly for the rest of the time I had the car. The non-OEM sensors work just well enough to make you think the part works, but you end up having to do the job twice :(.
@MikeBrown-ii3pt Жыл бұрын
Hey Dr. O! TRQ is an "economy" brand sold by many online auto parts places. I don't have any personal experience with them but, many friends of mine do. I haven't heard anything good from them so, I'm guessing that the quality is on par with Dorman and B(roke) W(hen) D(elivered)...2 of your personal favorites lol!
@edmarvin220 Жыл бұрын
That certainly is an aftermarket cat assembly. Looks to be a Magnaflow. I've had nothing but issues with their O2 bungs being screwed up from the factory and major fitment issues. They belong on the return shelf next to Dorman.
@wingman8447 Жыл бұрын
Amazing what’s out there. Another good fix. Thank you
@Cohiba2 Жыл бұрын
thread chasers are life savers wish i had more..
@suzylarry1 Жыл бұрын
02 Sensor instal socket is a special tool that supersedes to original design after you take paint off and polish to a given diameter to fit the application not to say it already has wire trough cut in it .
@jontaylor7450 Жыл бұрын
Hi, Would you not use anti sieze compound on them both?...They couldn't be fitted to anywhere hotter...
@codymarszalek9581 Жыл бұрын
I tried TRQ parts 02 sensor on 98 tahoe vin r 5.7 Two words garbage. Literally three chances & all sensors went dud. High resistance o.l & no heated circuit. Oem as best u can got that right ! Keep digging boss From Hoosier vill state IN Lowell
@gnohn9366 Жыл бұрын
Another good video. Although you missed out on another welding lesson from the keyboard certified welders.
@genefogarty5395 Жыл бұрын
The customization of the 02 sensor socket hit home with me, after 20 years I have well over 40 variations. Some Frankensteined out of necessity, but I've used each and every one, sometimes for things other than 02 sensors, lol.
@steveharleyfan Жыл бұрын
"Comes with rust from the factory" !!! I LOL'led at that...
@ReclusiveMountainMan Жыл бұрын
OEM is the way to go. Love the video. Keep em coming.
@jonminer9891 Жыл бұрын
I guess the economy is forcing a lot of handymen to try their hand at auto repair. Thank God there are real mechanics that can do the job right, every time, all the time. Do you know anybody like that? ;-D Thanks for sharing! Stay healthy!
@user-tb7rn1il3q Жыл бұрын
There are more jobs than people. The problem is no one wants to work on cars because there are easier jobs available that pay more.
@jrrose7153 Жыл бұрын
Trusted, reliable quality. TRQ Is our part around the south Tennessee. J.R from Tennessee
@scottnusser6232 Жыл бұрын
I have a couple of snap on 18 mm taps for straightening out jacked up O2 sensor threads. They work well but must go very slow with alot of wd40. As you know those bungs are super hard that's why thread chaser's often don't work too well. It's a shame that theives still work on cars, they give us all a bad name! You're a good man Eric. Keep up the good work and videos. Also customer's often create their own rip-off by being cheep guys!
@fishhuntadventure Жыл бұрын
WD40?! That’s not a tapping lubricant. It’s not much of anything but a solvent maybe, and a short term bare metal protective film
@dwaynemadsen964 Жыл бұрын
Thank you for sharing and stay safe.
@donaldhuffman8080 Жыл бұрын
Hey Mr.O TRQ parts are sold by A1 auto not bad prices either got my drilled and slotted rotors from them. I got a complete set pads rotors and clips for just over 100 dollars if I remember correctly. It was about same time you put on Mrs O’s new drilled and slotted rotors have a wonderful day 👍
@ljerry8440 Жыл бұрын
Appreciate even this Eric. Thank you.
@louisharris6398 Жыл бұрын
Owning my own shop I see this stuff alot. What I love about your videos is your diag ability, which is like mine, and how you call people ding dongs. I used to call my employees other words but since watching enough of your videos I started calling them ding dongs. It's probably a good thing. Love your videos, keep it up Mr O .
@Sojourning_ Жыл бұрын
good job boss.......i As for cross threading: I'm referring back to 1975: I went from up sate NY, cat dealer to a field job in La Grange Texas, back then you couldn't find it on the map, a pencil dot at best; but not now; in short; the company employed a few local country boys, framers, often they would hammer the sheet metal covers bolts back in to the weld nuts, old school, on the up side, it kept me busying replacing what they destroyed. those where the days: but by the sounds of it, those guys are still about, hammering the bolts in.
@markenloe1265 Жыл бұрын
Really enjoy your videos! 😎
@WayneWerner Жыл бұрын
The Other Shop must've figured that since O2 sensors are hard to get out they've gotta be hard to put in, too.
@davidkettell5726 Жыл бұрын
I used to make those o2 sensor sockets when i worked at G.M. They were too cheap to buy them so i had to cut two sockets apart ,weld them back together and machine the slot ,which i am sure cost more than buying the correct tool.
@PK15306 Жыл бұрын
Don't think you could make a bad video. Thank you.
@Llamathellegend Жыл бұрын
"Well, this videos kinda stupid......" 😆 🤣
@mph5896 Жыл бұрын
Looks like a DIY job in which parts were sourced from 1aauto. Non carb compliant cat 😉 They prob saved a small fortune (if they had + execution the first time). Bummer they can't screw a sensor in straight🙄
@fredwalker839 Жыл бұрын
Hubba Bubba Baby ! Good advice,,,,, No Do Dat ! Have a great weekend !
@mjb12141963 Жыл бұрын
I bought a truck that the engine had been replaced. Of course my luck, 5 months into this thing, the trans goes out. Long story short, two of the O2 sensors were cross threaded. I was able to chase them clean. By a shop. I don't know who installs Jasper engines. For some of us, OE parts are too expensive. "The Dollar Store" can be too expensive sometimes as well. Bailing wire sometimes is all you can afford, and that depends on if you know somebody has any bailing wire. Doing it right, is just not an option.
@kevinoscarson2941 Жыл бұрын
All mechanics have cross threaded a bolt a time or two. However I can honestly say I have never done it to an oxygen sensor. Gotta say Im curious to how they did that!
@jaeko2223 Жыл бұрын
my guess is because the clearance was tight and mechanic was sloppy ofcourse
@thomasdevaul911 Жыл бұрын
By being momos
@SuperHandyMan Жыл бұрын
Put the socket on the impact, put the sensor in the socket, aim, close your eyes and pull the trigger. Gotta be fast don't ya know.
@dr.shorty8765 Жыл бұрын
thanks for the video Eric, I did not know there is an up stream and down stream to those
@fzz188 Жыл бұрын
TRQ is online retailer of aftermarket parts, they also have a youtube channel
@rmay.1583 Жыл бұрын
TRQ is 1A auto brand, I believe he had an American standard thread and ran it down on a metric thread pattern
@Paul1958R Жыл бұрын
Eric, Great video and repair - thank you! What is your opinion on using a wee bit of anti-seize on the O2 sensor threads? Paul (in MA)
@chevyguy6961 Жыл бұрын
Paul, new O2's usually come with anti-sieze applied right out of the box. I alway's apply some to the threads if they don't. Doesn't take much.
@RJon2006 Жыл бұрын
I saw the title and thought you were talking to Joe Biden….good video, as always! Keep up the good work! 🇺🇸🇺🇸🇺🇸🇺🇸
@jacksmith2315 Жыл бұрын
TRQ is i believe 1A auto's manufactured parts. Ive used 1A quite a few times and recommended them to people a few times and have always had good luck with them.
@digitalwoodshop Жыл бұрын
Another great Video. Learned a bunch.
@gcrauwels941 Жыл бұрын
The good thing was I was expecting that you would weld a new sensor bung to the pipe when you thought the threads were cheesed, the bad thing was I didn't get to see you do it. 😆
@jeffryblackmon4846 Жыл бұрын
It will probably happen.... stay tuned.
@PedroReyes-pr5er Жыл бұрын
I would of retreat it and use new sensors !!!...?.
@shaneharrison4775 Жыл бұрын
Been that route bought a used truck with all new parts on it I wondered how many would pass the go no-go tests. Turns out most passed only one Ebay part was crap transmission shift sensor. Went to Napa and got a good one.
@v1-vr-rotatev2-vy_vx31 Жыл бұрын
Always had really good luck with O2 thread chasers
@mikecalvin1402 Жыл бұрын
Very honest job 👏 👍 👌 🙌 😀
@brianbanks3044 Жыл бұрын
"Nothing tighter than a cross thread"
@wildbill23c Жыл бұрын
Saves on the loc-tite I guess LOL.
@markh.6687 Жыл бұрын
"And one time, at band camp, I cross-threaded my flute!"
@wildbill23c Жыл бұрын
@@markh.6687 Are you sure you didn't put it in the trombone the wrong way by accident?
@NY411Info Жыл бұрын
Yep, I've used Bosch aftermarket that only lasted 30ish days. Went to Motorcraft 5 years still working. Figured the Bosch would hold up, but nope.
@annyer262 Жыл бұрын
aftermarket O2 sensors are good for removing and replacing O2 sensors. I have installed 5 and had one work. I have learnt my lesson. OEM oxygen sensors only for me!
@tpanther9567 Жыл бұрын
I have had some success with heating up the O2 bung with a torch to get a tap or thread chaser to clean them up. I also like to put anti seize on them when I install them so it makes it easier for either myself or the next guy.