DON’T BLOW A TRANNY! Always make sure your WHITE 4-180 LUBE pressure circuit is working 

[@dougpeterson5257]

Another thing fixed! 😊

[@Dan-qy1rg]

It's nice to see you get those lights on and working correctly. I think you did the right thing putting the second light on and having the front separate from the back to tell which one is not working. Thanks for the video Ross, have a good week!

[@pagrainfarmer]

You're blowing my mind with all this wiring stuff. Definitely my weakest area of farm mechanics. Good job, buddy!

[@stephenheyes4324]

Great improvement with the two warning lights Ross

[@DonWelter]

Custom by farmer engineering at its finest!!!

[@banditfarmer1900]

You know it makes you wonder why they didnt do this at the factory to start with ? This is one of those times its begs the question why were you not thinking engineers ? Great Idea Ross ! Bandit

[@johnziegler3695]

That was good idea with the lights

[@alanmize5627]

Ross those tower switches were usually adj by pulling out the plug on top, I have one in my hands.

[@larryklostermann5779]

Nice video Ross

[@richardschaffling9882]

Looks like a good way to fix it

[@bobtuckosh9870]

Hey Ross I wish you could see how super tuned my little 10 month old grandson is while we're watching your videos. Glad that worked out for you, great video.

[@mikei2141]

Hell yeah!!

[@michaelsheeder148]

Ross, having the two lights makes a lot of sense 👍 thanks Michael

[@Ron-m9p]

great video you would think they may have caught the problem at the factory but I'm sure it's better now

[@John-o5t7u]

yep

[@anthonyhengst2908]

2 lights definitely make sense. Following this series im definitely learning something. Do you think when White was taking over Oliver the engineering went downhill??

[@CurtMcElvain]

Nice work! Thanks for taking us along.

[@hacc220able]

Thanks for sharing.

[@rosstheoliverman]

Thanks for watching!

[@Mal-u-Envy]

Use a step bit for things like that would be a lot easier... Or in your case, go up a drill bit size until you get to the size you need... simple stuff

[@curtbrewster8635]

The birds sounded more like sandhill cranes? We have Canada Geese here in Fort Collins Colorado all in part because in the late 1950's Father Goose Gurney Crawford started a small flock and now we have thousands that stay here year around.

[@jimtrewartha2594]

Hey Ross, you should try step drills for projects like that. They work great in sheet metal, are short, and drill a truely round hole. Keep the videos coming!

[@oldasdirt1909]

I think those were sand hills not geese but big birds for sure 😅. And it working correctly 😊

[@kenarrigo]

Thanks for ur time and effort good job

[@jaholl97]

👍👍👍👍👍

[@clarencetrice4442]

😊😊 HI ROSS I would put more diesel fuel in the tractor 🚜 😊 and bleed the fuel system and see if there's any air in it U may also need 2 move the tractor 🚜 😊 where it is level and flat U might have 2 use a 12 volt fuel pump 2 push the diesel fuel 2 the injector pump then try 😊😊 OMG 12 15 2O24

[@oldcars5547720]

When you started this project I thought it was a bit OCD but I guess transmissions are very expensive (if you can find one) to replace or repair. The second warning light was a good idea with very little effort required since you were replacing both sensors and had the wire. Does the 4-150 have two sensors? It should not be too difficult to do the same thing to the other one.

[@LynnKorte-ve4qf]

Does the plye stereo work?

[@garykoerth8563]

Definitely sandhills......the ribeye in the sky

[@dennisspiehs4593]

Those are Sandhill cranes

[@MagicCat-el6mn]

Did you delete a comment of mine yesterday about hunting on your grandpas land some 40 years ago?

[@rosstheoliverman]

@@MagicCat-el6mn no? KZbin does stuff like that sometimes I’ll have to look and see if it flagged the comment for some reason.

[@ThomasKlipping-yd1gt]

I believe that was a good idea should've been that way from the factory 😊

[@MagicCat-el6mn]

@@rosstheoliverman Yeah I mentioned what gun I used ..Damn UTUBE! SMH.. No biggie.

[@markhicks9545]

Top job done there if only you could fix stupid 😅