Don't get stressed with your INTRICATE Dies!

[@tinahiggins2965]

Trust me everyone - I followed this advice from a previous video - and bingo, it works!

[@jospi1844]

GREAT TIPS. THANK YOU. I saw a video that shows using bubble wrap envelopes. You cut the bubble wrap to the size needed. (1) Lay down the bubble wrap, bubble side up. (2) Lay the cardstock on top of the bubble wrap. ( 3) Lay the die on top of the cardstock. . Layer cutting plates how you would normally. This cuts beautifully. (Now I keep my used bubble envelopes instead of throwing them away.) It also worked beautifully.

[@kiwipommiegirl]

Do the bubbles pop as they go through the rollers?

[@zenamccalmont7637]

I’ve been die cutting for years and didn’t know about the fibres, it makes perfect sense. Thank you, proves you can teach an old dog new tricks 😉

[@Loveulott-lz5pb]

Happy New Year Lou, another tip is to wipe a solid bar of soap across the die, it helps release the die :)

[@nancyskinner5207]

Just this week I threw two nesting dies in the waste basket. Luckily I haven’t emptied it yet. You have given me hope. Excellent explanation. Thank you!

[@Karen-ch1dy]

Yes! Now I know why some cardstock does not work for die cuts! Thank you Lou for the wonderful explanation!

[@sandranorth0009]

Years ago we were encouraged to put wax paper between the die and cardstock. Possibly to make it easier to get all the bits out, I can't remember. Thank you for the comprehensive tutorial. So nice to be talked to without being patronised 😊

[@suehanks946]

I usually run mine through twice, works wonders.

[@johannagoldenberg3300]

I've been papercrafting for almost 30 yrs (😮) and thought I knew all the tricks for diecutting. And I do, but yours are next level! I will be incorporating these. Thank you, also, for the clear explanations and the science 😊

[@jackiekeen9468]

Thank you x

[@lynclifton3285]

Good tips - I always have my dies face up as this was the recommended method when I got my first Big Shot machine., I also take the dies through at their narrowest way round and often at an angle too - I still have dies that give problems. I have realised that some cardstock is more resistant than others. When a newbie at die cutting, I got waxed paper for using with dies, to help with removal - and used it all the time, but now I don't do die-cutting as much, due to only having a big shot plus in working order and it's heavy awkwardness at getting down & back up to its shelf, and have lost the habit of remembering the wax paper, for those intricate dies!

[@SF-xm7re]

Really clear and concise. Thank you. You are so skilled as a KZbin presenter...

[@michelegourd5742]

Lou, this was so very helpful!! You explain things so very well!! You are a great teacher!!! Thanks so much!!

[@erikaharris3078]

What FABULOUS tips you’ve shared. I’ve been card crafting with dies for YEARS and have never seen most of your tips. THANK YOU SOOOO much❣️I’m going to pull all those forgotten intricate dies back out and show them the love I had when I bought them!🤩❤😍

[@lauriestephens98]

Thank you for the refresher Lou. Always helps to have a reminder.

[@annabellagardner3190]

Thank you. This rocks so well !

[@evelynbrown5312]

I usually get my awkward dies to work better by having the die facing up too

[@gwendolenlever7043]

❤l thought it was because my old Big Shot was worn out but find it still happens with electronic machines so I found your explanation and demo very informative, Thank you!

[@maryt9375]

Simple - but it works. More videos like this pls

[@ginak921]

Great information , now i understand with the last demo about the card stock.

[@evelyndavis5999]

Thank goodness for this video !!!

[@davinahardy7195]

Well who’d have thought, brilliant advice.❤

[@rebeccaacquah1475]

Absolutely Brilliant thanks so much for the tips ❤

[@jillburch7691]

Very helpful tips. I’m so happy you are doing these videos.

[@donnacarraway9182]

Fabulous! I noticed that my new fold away big shot actually says to put the card on top of the die instead of the way we have been doing it. I didn’t like that at first because it meant that sometimes I needed to tape it in place and then turn it over but knowing why helps! Maybe they have watched your videos?! Thank you! 💕

[@PKaye3369]

By far 🎉 one of the most comprehensive and easy to understand and follow videos on intricate dies. Well done and thank you!!!!!!

[@sq.ytc.]

I am currently waiting for my sidekick replacement machine, but a friend shared this with me & I am saving this to try when it arrives, because I also have die issues like so. Your video has now given me an extra reason to anxiously await my machine😅 hope it works Thank you for sharing this🌻

[@JH-wd7ul]

Excellent tips!

[@lisahaasecustomsewing2106]

I often use very intricate dies (Diesire) and will hav issues with a clean cut. This was very informative and helpful

[@lorraine8037]

Thank you ! I had never heard this!

[@sueyoung3077]

Thank you for sharing your crafty knowledge with us. I knew the tip but your explanation as to why we should put blade up made it make sense. I didn’t know about the types of paper could be the reason why dies didn’t cut through.❤

[@marcireale]

This is very helpful. Thank you!

[@juliesmith3857]

I also like using the weeding tool from Sisk that rolls over the card stock to get all the nibs out

[@rosemarydanson4158]

This has been a great help, thank you. I nearly threw out a couple of intricate dies but now I can use them successfully.

[@tarabeard]

Great tips!

[@bridgetoglesby3474]

Thank you so much! I do have dies that I wanted to use so very badly but could never get clean cuts so like you said, I set them aside & just avoided using them. I can’t wait to try these tips on them & use my dies again!!

[@jillsater5121]

Thank you so much for the great information! I've had so much angst with the ghosting that I've almost entirely given up on die cutting. I'll try using textured paper and see how much love I can give to my intricate dies!

[@annewilkinson7504]

Great advice clear and precise thank you soooo much x

[@Cyrilmc222004]

Thank you so much I really really enjoyed watching you take us all through these helpful and useful tips. I’m going to put this into practice with my intricate dies. Please stay safe and well too xxxx Mags ❤❤❤❤

[@brendaleitzow8062]

Very helpful. Thank you!

[@jominter1089]

Wow, why did I not know these tips, thanks Lou.

[@kilodeltawhisky1504]

I used my dies and cutters for the furst time ladt night and the thinlits lace die would not cut... Very disappointed. I'm going to use your tips and am eager to see what happens. And I don't have to buy a $35 extra plate and wait for it to show up...😁

[@julieemmison9007]

Wow fabulous ❤

[@GewoonelsJustels]

Just fab!

[@jacquiposener7262]

Great tips Lou. I do have some dies that I not only avoid but have put into my giveaway pile. I’m going to rescue them and give these tips a trial. Thank you so much.😊

[@tammyh1010]

I changed my Christmas card for this exact reason. Thanks for the tips!

[@thecreativecountrycrafter]

Awesome tips!!

[@CraftStashcoukTV]

Glad you like them!

[@Mari-cre8s]

SO very helpful, Thank You!! There are definitely certain papers that are a near to cut! Any more tips on distinguishing different types of paper for specific uses like this would be immensely helpful! I never get past the colors enough to look at the rest of the qualities !! 🧑🏼‍🎨😀💗

[@annabellagardner3190]

Thank you. 🙏

[@melissaverboom3542]

I sometimes have trouble getting the carsstock then out of the die in one piece. Are there tips for that aswell? These tips were great, thanks Lou!

[@christoomey5877]

Great tips😍💜🧚‍♀️😘

[@Birds1953]

Great tips❤

[@littlegoldiesbooks]

Very helpful!

[@kimhull2620]

GREAT tutorial... THANKS

[@Barktholemew]

I’m really looking forward to and enjoying your videos lately, they’re so helpful and clear, thank you!

[@adriennecollett3937]

I’ve used the cardboard from cereal box for shims(s) and I’ve used cereal containers Inside the box between the diecut and the paper

[@julieellis-davies3717]

Thank you 😊🎉

[@juliesnyder7785]

Awesome video!!!!!

[@michelemalanczyn8890]

Fantastic video Lou! Really helpful, thanks for sharing.😍

[@lxy7820]

Your tips and explanations are absolutely brilliant. I have several new intricate dies, thank you for helping me use them correctly from the beginning!

[@terribarnard7549]

Thankyou for your tips. I just had a big shot for Christmas, and found your video very informative. ❤

[@junetimson884]

Great video Lou..I wasn’t aware that the paper could be the problem…other than glitter card I know is a problem sometimes. I given up on that!

[@siggybenedict-shields3883]

Thank you so much for the info!

[@caroleEvans2020]

Ty for great advice!! X

[@cathyhughes991]

Wonderful tips. Thank you so much! I have definitely had a problem with some dies and thought it was my machine or the die. Now I know what to do. ❤

[@cisvolk]

Never have I seen such a good video packed with info about all you need to know about one topic. Well done! I hope you get lots of views 🥰👍🏻

[@JC-pm6tf]

Seriously!!! You enjoy being talked to like a toddler? In that case, don't forget to be sure your under panties have the cotton lining in the inside before putting them on. This is to absorb any drips of urine you missed while wiping yourself. Now step into each leg hole from the waist hole, the waist hole is the biggest of the 3 holes.. shall I continue?

[@paulinetaylor4492]

So true, it works every time…….

[@nancyw8450]

Thank you for all these great tips !!!!! I think I can use a few !!!!!!!!!

[@candyclay01]

Brilliant!

[@pauladyer9845]

Great tips..thanks

[@MareeForman]

Great explanations. TFS 💕💕

[@LisaVornhagen]

Thank you so much for these great tips!

[@CraftStashcoukTV]

You are so welcome!

[@ritafadams]

excellent explanation and demonstration!

[@NolaSpiersMitchell-gu5iu]

Thank you for sharing Nola from Australia

[@janetfrain9330]

Thanks Lou fantastic tips and I'll certainly be trying them x

[@bethjackson8727]

Such a clear concise video. Thank you.

[@barbmennie2502]

Thanks so much! This is so helpful; it will encourage me to use my intricate die’s.

[@triciacarolkilbride2993]

Thanks so much Lou as a newbie I replaced my die cutting machine and plates to no avail. Bought the big shot plus and it was no better...now I know why! Even bought an intricate die metal plate! Can't wait to use my gorgeous intricate dies now! Happy New year hunni xx

[@orlahastings4563]

Excellent Lou, thank you very much, really helpful tips and tricks. ❤😘

[@starmerrill4691]

Wow! Graet to know now. Thanks.

[@rondabartholomew458]

Thank you soooo much. Works.

[@CraftStashcoukTV]

Glad it helped

[@maggiebrinkley4760]

Thank you, Lou, this was very instructive! And what gorgeous dies, too!

[@winifredkennedy6669]

Thanks Lou will definitely give all this a try

[@bethrogers5656]

Thank you so much for this video! So very helpful. I love those intricate dies but have struggled with getting clean cuts. Looking forward to trying out all these techniques! By the way, M2S’s desk vacuum is perfect vacuuming up those little bits of paper stuck on cutting plates when using intricate dies!

[@vickymajajas5866]

Thank you Lou. Makes so much sense.

[@rbailey3309]

Thanks for the tips!

[@ooman56]

Aaaack! This is sooo helpful, thank you! I've gotten rid of so many intricate dies because I got tired of fiddling with them, I thought it was the dies. Your tips would have helped for sure. So if I had known, (sigh...). Time to go buy a couple of intricate dies and see the magic happen! Or at least not be afraid to buy an intricate die I would like, when I see one. Any tips for using wax paper or freezer paper to release all those tiny pieces? Thank you again, so much!

[@jenniferrobertson6595]

Very helpful tips. Thank you!

[@sandrasimpey1712]

Some great tips Lou, thanks x

[@yelsyels]

Great tips! Thank you ❤❤❤

[@bernadettelawson2916]

Great tips. Thank you x

[@sophievandale5633]

Thank you❤

[@shereehoshing9827]

Very helpful

[@chrisarlington1792]

THANKYOU. I'm old school and always have dies face up never had a problem. Your education helps me realize why. I was wondering if it would be safe to put cuttung plates in the dishwasher? Also,can I share this link with others?

[@CraftStashcoukTV]

Yes, you may share the link with others :) As for the cutting plates, I'm not so sure if it's okay to put them in the dishwasher.

[@CraftyAliConfessions]

HELP, One thing though, sometimes I get fine slithers of paper around the cuts, especially when I run the die through twice? Any tips for this? I normally have a tooth brush that I use to brush these away, but they seem to be really fine? Great tip today! I’ve been doing this for a while now and you’re spot on! It’s frustrating, but when you know how it becomes more enjoyable crafting! Thanks heaps Lou xx

[@patriciaj9670]

Tape your die in place, the second pass the die is moving a tiny fraction, hence the slivers

[@nancywalker7302]

I don't always know what it is when I'm done.

[@Ninjamom4]

❤️❤️❤️

[@KKJournals]

I think it's the cheap dies, too. I bought some off amazon and they won't cut through, even with a thick shim.

[@JC-pm6tf]

I enjoy videos of easy hacks or tips, but explaining to me all about the why's and whatnot's is crazy! I'm not 6 and I don't need to you to explain everything 2-3 times as to why you are turning your paper, just tell me to turn my dies at an angle and put them with the paper side up!!

[@alwayshavestrengthjoy7450]

Really boo? Take your ADHD meds!

[@rmqld]

Thank you for these tips- brilliant!

[@MargaretSchaefer-qg2ok]

Very helpful!