Don’t Hire a Damp Expert - Watch This DIY Chimney Damp Proofing Guide!

[@derekwells7882]

Thanks for this mate, well done.

[@leedsguyuk]

WOW Well done mate, beyond my capabilities though as a 64 year old DIYer 🤣🤣🤣🤣🤣 Liked & subscribed 👍👍👍👍👍👍👍👍

[@omarfarooq593]

Did you leave a gap at the bottom so not touching floor where the membrane fits and the same for plasterboard?

[@pilotstefan1322]

Tip - you can get a drill attachment for mixing the plaster (but also works for mixing paint and cement) for about 15quid but for 35quid from amazon you can get a standalone mixer paddle which works even better (ive had one for several months and works great)

[@gavpatterson1943]

I have this same issue. Damp at the sides of the chimney and the opposite side of the room. . I’m thinking it’s due to the concrete floor that was installed before I bought this house. Pretty sure there’s no dpc under the floor. Moisture trapped under the floor is working its way to the edges and up the walls.

[@petrolhead0387]

I have exactly the same issue, it's on an adjoining wall as well, however it is also happening on the second floor. I think it's a combination of issues for me, no dpc, neighbors roof leaking and also my neighbors pebbledash goes right to the floor, which makes me think moisture is building up between the pebbledash and the house, slowly making its way into the side of my house.

[@OMAR-rv6hi]

As always great content, well done 👍.

[@new2property]

Thank you, I`m glad that you enjoyed it.

[@jcorchards]

Great video, lots of info, I have a similar problem with what I think are hygroscopic salts in my attic bedroom chimney breast, house is 100 years old, I've had all the usual outside chimney jobs done, and still get a problem, comes and goes with weather, I think my problem is I have a chimney cowl allowing the chimney to bteathe but will be allowing the moist air outside into the top of the chimney only, my question is, could I put the membrane over the top of my existing plaster and then create a new surface in front say like a nice panelles wall or brick slips, to prevent having to hack all the older plaster off, what's your thoughts. 🤔

[@bilpat5123]

Great video. Does the damp still sweat behind the plastics liner, would it not cause any issues in the future? Does the damp moistire only climb so far up the wall?

[@jimh4072]

As an owner I would be happy if it lasts for 10 years or thereabouts. Even if it has to be redone later getting 10 years or so trouble free it will be worth it. 😊

[@johnadams1976]

Doing all that work, you've definitely got the skills to be able to plaster that small area. You can do it. Save more cash. Great effort

[@davidellis5964]

What about the mastic to fill the plug holes before inserting the plug? I use the membrane quiet often in my work it has many advantages over sand and cement or slurry cementitious coatings. The only disadvantages the brickwork can sweat behind it. Also make sure any electrical sockets are surface mounted and any fixtures like skirting-boards etc have silicone mastic applied to the raw plug hole before fitting the plug, this stops the membrane from being punctuated and prevents any moisture from escaping.

[@BlueVelvetBear]

£600 instead of six grand, you did very well 👏 👌 👍 😀 😊 terrific video thanks

[@new2property]

Thank you 😁

[@farzinfereidouni2714]

high value video, really enjoyed it thankyou

[@new2property]

Thanks so much for watching and for taking the time to drop a comment

[@yasirnoori4848]

Very useful video Dan. I'm dealing with a similar damp issue now, so it's been really timely.

[@new2property]

Glad the video came at the right time for you! Damp issues can be tricky, but getting ahead of them early on can really save you time and money in the long run. Good luck with everything!

[@chrishall6938]

Excellent video, Dan. Super useful.

[@new2property]

Thanks for watching Chris, I`m glad that you found the video useful.

[@johnadams1976]

Would it be worth removing the chimney breasts completely? Save you having to have that vent and constant draw of air?? Or is it for feature/aesthetics now?

[@kevinwooldridge2127]

As always Dan a really useful video, thank you

[@new2property]

You are very welcome Kevin, thanks for watching and for dropping a comment

[@DavidJarrold-e7j]

A great example of why you should get a damp expert in.

You say that, but damp proofer's must have the worst reputation of all tradesman next to roofers.

[@DavidJarrold-e7j]

Finding any trade that actually knows what they’re doing is a challenge to many ‘experts’ that have done one day courses.

[@kamaldahal4672]

Hi your videos are top notch, I’m planning to go into properties ladder so would you be able to guide me to learn about it plz , I’m based in plymouth southwest

[@new2property]

Thanks for your comment! I'm really glad to hear you’re looking to get into property investment! I have a course called The Buy to Let Blueprint which covers everything from the basics to more advanced strategies. It's packed with over 65 lessons to help you build confidence and avoid common pitfalls. I also run a free workshop and offer one-on-one consultations if you’d like more personalized guidance. Feel free to check it out and let me know if you have any questions - I’d love to help you get started!

[@StephenOverthrow]

I'm on expert but, I get that the membrane will prevent the danp from penetrating through to your new plaster and ultimately into the room. What I don't get is, the damp from the hydroscopic salts in the brickwork behind the membrane is still occurring and will ultimately damage the structure behind all of the membrane.

[@new2property]

Hi Stephen, Thanks for the insightful question! The main cause of the issue is typically high moisture content in the room air itself, which reacts when it contacts the hygroscopic salts in the wall. By installing a constant trickle fan in both the bathroom and kitchen, the overall moisture levels in the room will be lowered, helping to prevent this reaction. With the damp-proof membrane acting as a barrier between the hygroscopic salts and the room’s air, they won’t come into direct contact, which effectively minimises is issue. This approach tackles the root issue by reducing room humidity and isolating the salts, keeping the interior dry and protected. Hope this helps clarify, and thanks for watching!

[@drsureshuk]

could i have the lonk and details of the damp course you did and also their contact details please

[@new2property]

Sure, thanks for watching. Telephone Number: 01942 887920 Email: [e-mail] Website: pamties.co.uk/ Educational Damp Course: pamties.co.uk/product/condensation-ventilation-mould-masterclass-manchester/

[@coolmonkey619]

Is the damp not from rain on the outside wall? How can a little bit of water inside the house cause that much damage

[@nabazhamad5988]

❤

[@karlmabe1649]

Tenants don't vent open windows or heat property and fill it full of stuff