Don't Miss Out: Revolutionize Your RC Car with 3D Printed Parts! - What's on the Bench Ep.92

[@woodland_rc4712]

Bit of a bummer after over 6 years of watching all the content from SBG and Harley designs that you guys have moved to a member's group. I can recall many videos where you both remarked you would never do that. I've learned a lot of things from watching these videos and it's just a shame that I'll miss out on content if I don't pay for it, but I'll continue to enjoy the content and sticker pack and I do thank you.

[@scalebuildersguild]

Not to worry, the main content will never change.

[@Sysiphos]

VS4-10 leaf sprung would be perfect for PLBTF, Josh will hate it

[@kevin_fine]

Haha that was entertaining! I'm glad you like my clipless setup for the H10! It is an over-center mechanism, which basically means you move the part past the point where it can open itself. So as the battery tries to push out it actually twists the latch tighter shut!

[@just.jose.youtube]

That's defenitly an improvement! Personally I can't understand how Vanquish came up with such a lame setup for securing those battery covers. No one's perfect right? But your simple mechanism really shows them how it's done. 😛

[@douglasperry1226]

Prefer airbrushing by far! Lol Building a rig right now tube frame and need to make panels with metal not plastic inside panels mind you. Airbrush some ghost skulls going to be sweet!✌🏼🇺🇸

[@fallencrawlerrc4587]

Very very cool this week!! Interested in the artful dodgers chassis and the pile of parts to come!!

[@erichawkins6231]

The Porsche looks so sad up there with no front axle

[@rc-ingaroundamerica8792]

Not going this year to PBTF, went the last 2 years, but I'm outta Cali soon, so most likely missing Axialfest as well, bet Josh's is is signing in great disbelief about leafs on a VS410, can't wait to see his face once it's built

[@scalebuildersguild]

Sorry you won't be at PBTF. I think Josh is going to stop talking to me 😂

[@natehill8784]

From the Rocky mountain series on I always look at your hub screws.... Waffle House had the 1 golden "nugget" to the optic with 3 and 3.... Love it!

[@scalebuildersguild]

Thank you!

[@timosimracing1227]

That poor Porsche really needs it's front axle back! Great video thanks. Optic looks awesome.

[@just.jose.youtube]

Hahaha! That's been catching my eye for a while too. Poor thing is hanged in there with its dangling guts... 😅

[@scalebuildersguild]

It does!

[@EWCRC]

Looks Awesome!! What about connecting both batteries in parallel so you would not have to stop to switch plugs?

[@scalebuildersguild]

Why didn’t I think of that! Great idea!

[@JiggsHenry]

Could you do a video about aftermarket providers? You always are getting cool stuff from places I've never heard of. I consider myself a pretty good googler (that's what she said) but a cool collected list of some (obviously not all) would be some interesting subject matter and great advertising for them

[@scalebuildersguild]

I’ll try to come up with that, great idea!

[@1734Glock]

Please do a series on painting the Knights Custom interior.

[@scalebuildersguild]

Which one, he’s got dozens!

[@1734Glock]

@@scalebuildersguild Vanquish H10 Knights customs moveable interior.

[@scalebuildersguild]

@@1734Glock but I did that one already, on this series!

[@boldrbangr9834]

Anyone tried wrapping a Lexan body? Heat too wrap too much?

[@scalebuildersguild]

Should be doable, the wrap is much thinner and lean can take some heat, just be careful to not use too much!

[@alexanderkincanon92]

I don’t see the file for the print you used on My Mini Factory. Has it been released to the peasants yet?

[@scalebuildersguild]

He’s still working out some bugs, very soon!

[@robsadler7094]

So you ruined your lexan streak for nothing?

[@scalebuildersguild]

Ha!

[@marcushaas44]

That big hole in the fender is actually very appropriate for a Chevy of that age 😂

[@kccrawler4624]

Are the interior files available yet? Don't see them

[@scalebuildersguild]

Looks like he’s working out some final kinks. Shouldn’t be long now!

[@cablety]

So keen for a leaf vs410! Especially with twisted fab co parts 😍

[@Qfrcy]

The CUCV is looking so good! 😍 when I made my inner fenders for the BRX02 I printed the first prototype in clear pla! Helped a lot to see where the issues are and where there’s need for any holes! 😊

[@scalebuildersguild]

Glad I could help!

[@coazracer]

I will be going to PLbtF. Hope to meet ya. Have you heard of any more details from Pro Line? Everything on the page is tentative….

[@scalebuildersguild]

Make sure to come up and say hi! Haven't heard any details, but I'm sure to share whatever I learn on the livestream with Josh!

[@coazracer]

@@scalebuildersguild or you be sure and come by our camp spot as well! We are from Az(sorry, not scottsdale) lol….. W.A.C.K. Western Arizona Crawler Krew!!!!!!

[@KaedensKustoms]

Can’t wait to see what you do with the twisted fab co kit, kasey makes amazing parts and funny enough I actually did all the welding for him on your kit 🤙🏻 just finished up mine with a spring under set up.

[@themadscientistofmakers339]

How small of a print bed do you think you could get away with for resin printing that interior? Im hoping to fit it on my Photon S, but its only a 3x5 print plate...

[@scalebuildersguild]

Hmm, how tall can it go?

[@themadscientistofmakers339]

@@scalebuildersguild 6.5 inches (165mm)

[@madmikescustoms]

That twisted Fab Co kit is badass Matt. Your custom wrap turned out great. I'm definitely glad that you got me to join your only fans page. If you get some time can we please see your RC Go kart video please 🙏. Thanks Matt and God bless.

[@scalebuildersguild]

Thank you! Yes, another episode of Weird RC will be out soon, and first for channel members!

[@BullmanBuiltRC]

I like that CUCV. If it ever becomes for sale give me a chance before Teleguided! 😬

[@archerash6695]

Awesome! You did a great job. The blue inside would drive me nuts. Flat black over the battery boxes and panels? 🤷‍♂️

[@Mrtmbathke]

Are you a Marlboro Man?

[@scalebuildersguild]

😂

[@cherokee1995]

I can hear Josh telling you that you can't park there! LOL

[@scalebuildersguild]

😂

[@scottmac6959]

What batteries are you using in the H10? Thanks

[@scalebuildersguild]

Using the recommended one from Gens Ace Adventure Series. Info on the website and box!

[@scottmac6959]

@@scalebuildersguild Thanks so much…I have mine on order. Wasn’t sure if there were other batteries you were using.

[@shuster1921]

Seeing all the way through your fender well from the cab, is normal in Texas🤘🤠🤘

[@TheLilhulk1111]

As long as it is not a 3d printed piece of your head or Josh

[@rcmike09]

The only thing I wish they could make is a steering wheel that moves more than 70 degrees or what ever they have. Gearing between the servo and wheel would be a good way of doing it.

[@austnsauce2543]

Would like to see Josh look at you if it’s slow, then look forward when you get up to speed as he mentioned in the livestream

[@jaredphipps3757]

3D printed parts? No way! What’s next, some kind of sticky material you can cover your car with instead of paint????

[@austinkunkle4103]

What, like a big sticker 😂

[@scalebuildersguild]

DO NOT GET ME STARTED! HA!

[@Tdawg0429]

Going to PBF for the first time.

[@scalebuildersguild]

That's great! Make sure to come up and say hi!

[@Tdawg0429]

@scalebuildersguild for sure will. Bring your 1/18 Suga. Our club, The Micro Crawler Club is doing the mini scale trail.

[@1734Glock]

Not finding the H10 Knights Custom interior on his website. Any updates.

[@scalebuildersguild]

Probably tweaking the file a bit still!

[@TheMileHighRC]

Need to get you a scale speedometer for you dash now

[@davidwatlington3737]

C'mon buddy, the back of the seat in the CUCV just can't stand up in the back window. Please, to me it screws up that really cool build.

[@scalebuildersguild]

Sorry I don't have a CUCV in my backyard to reference. ;)

[@RandallRCTherapy]

sick! I Love it Matt.💰

[@RCShepski]

What is so important at 10pm that an alarm is required? In vancouver it means “mandatory Metallica” on CFOX

[@scalebuildersguild]

It's there to remind me to either wrap up whatever I'm doing, or, GO HARD ALL NIGHT!

[@jeffnewhart491]

Try wasting a bunch of 3m vinyl trying to wrap a parma xciter body. Only to give up and paint it anyway. It's not that easy... Lol!

[@overlandrcadventure]

Hey Matt who are you going to get to drive your CUCV? Have you seen Neca’s jaws figures such as Hooper or Chief Brody? They are about the same size as your Stan Lee figure

[@scalebuildersguild]

They’re good looking drivers, if Stan isn’t up to the task, I’ll grab one of them! Thanks for the suggestion!

[@BlindGuyRc]

Awesome episode. Optic looks awesome. I think I may try that interior. Very cool Cucv coming along nice. I have the perfect truck for that leaf spring kit. May have to talk with him. By that.... I mean... buy it haha

[@scalebuildersguild]

Right on!

[@kendotek9414]

The lexan fender wells should be a pass. You just installed some fender wells, so what if they happened to be made of lexan. Whats next, stickers on a lexan body counts too?🤣🤣🤣

[@scalebuildersguild]

I did have to paint them and trim them out, so I feel it met the criteria of working with Lexan!

[@davidwatlington3737]

Sorry, didn't mean to sound harsh. You just don't see the seat in the back window of any square body Chevy. This version may be different. I've never seen one in person.

[@scalebuildersguild]

All good, I’m happy to take another look at it.

[@beardedraleigh1649]

Josh thought he was cool until Matt hits 100,000 subscribers first 😎🤙

[@scalebuildersguild]

Fingers crossed!

[@michaelmarr2066]

Throw the body clip out and flip the pin upside down, putting it in thru the top. Why doesn’t anyone else do this with the h10? It looks clean and still functions the same. I know some excess will hang out of the bottom and if that’s bad for your terrain then grind it down some.

[@scalebuildersguild]

Still not as quick or efficient as the Fine Laser Designs way!

[@daledavis8093]

Im waiting on Fine Laser Designs to get an Arrma Big Rock 3s, so I can get the clipless body mounts

[@scalebuildersguild]

Very cool!

[@VermontScaleCustoms]

The real question is whether or not a crawler is going to make it to the cottage with you. The interior details are looking amazing. You can definitely tell it's the both of you. Yes, those inner fenders are another one of those things that RC4WD does that could be done better with the slightest bit more effort.

[@scalebuildersguild]

3 boats... no crawler 😂

[@vlozity]

scan the fender walls and edit it, make a mold, ask Josh if he can make lexan fenders for you to save weight

[@scalebuildersguild]

Nah, I’m not worried about weight on the CUCV, heavy chevy is better with leafs!

[@thomasbialzik3060]

As a member, will I have access to ALL the videos filmed at the cottage?😂

[@scalebuildersguild]

Only one video was made, and it nearly resulted in the sinking of a boat...

[@SaltPondRC]

I like the livery. "Smoke 'em if you've got 'em" as they say.

[@scalebuildersguild]

But don't. 😉

[@beardedraleigh1649]

Please print a larger scale head of Josh and put a shirt but all the way up on him.

[@scalebuildersguild]

😂

[@Jeeplee_rc]

I have had a capra with purple metallic vinyl wrap. Loved it! The cool thing is if you scratch a panel up it's an easy repair! No need to repaint!

[@scalebuildersguild]

Awesome!

[@_Sphaxz_]

I might have to consider trying out a wrap. Seems like it might help hide layer lines on 3d printed bodies at least a little bit and could save on some sanding

[@scalebuildersguild]

Go for it!

[@robinarmstrong9790]

How good does the Optic look with Tanks on? Got red ones on mine.

[@scalebuildersguild]

Looks so good!

[@Yavul85]

I do love the CUCV so much, My idea of a perfect build. I'd be so proud to build one half a good

[@scalebuildersguild]

Thank you!

[@tundrasr5709]

When it gets looser, it gets tighter. The magic of cosmetic surgery. 😂

[@scalebuildersguild]

😂

[@earthcoloredeyes5043]

Full proof aka idiot proof? Hmm?

[@scalebuildersguild]

😂

[@westdesertwheeler]

PLBTF bring your Sun hats and rock lights 🤘🏼🤘🏼

[@scalebuildersguild]

👒 😂

[@blitzrc4713]

Have you tried hydro dipping yet? I have some hydro dipped in carbon look splitters etc for my new golf r (real car😂)and they look amazing!

[@scalebuildersguild]

Nice! Hydro dipping is not something I’ve tried, but the results are certainly pretty awesome!

[@blitzrc4713]

@@scalebuildersguild definitely more durable than I thought they'd be hope you give it a try soon cheers mate 🤟

[@chriscord6524]

That interior with 3 servos is next level

[@Toodles77]

How do I join membership

[@scalebuildersguild]

Link in the description!

[@NickP_830]

Love that CUCV! I hope it makes a trip to smiggins when it’s done.

[@scalebuildersguild]

Ah! Unfortunately, Rick and I will be meeting 1/2 way between Ohio and Ontario this year, so no trip to Smiggins this summer.

[@brsrc759]

You uploaded this 9 days ago. That's too many days without content from you 😢

[@scalebuildersguild]

I guess you missed the Livestream WOTB episode from Thursday then!

[@brsrc759]

@@scalebuildersguild yeah unfortunately the live streams are too long for me 😥. Your 10 - 15 minute episodes are perfect.

[@GSG-lc5zm]

So its been 1 day since "josh" messed with lexan? 😂🤣😂🤣

[@scalebuildersguild]

I'M NOT JOSH

[@GSG-lc5zm]

@@scalebuildersguild That was some funny 💩 , had me rollin 🤣

[@Mike_and_Life]

Someone looking good with that haircut... also, someone puts product in while his hair is still damp. What's "at the cottage " code for? Is that what the kids are saying these days?

[@scalebuildersguild]

Ha! The code is we went to a cottage for a couple of days! Lots of lakes and rivers in Ontario!

[@meirdeaph]

Awesome stuff ❤

[@scalebuildersguild]

Thank you!

[@verpine3534]

That interior is pretty dope. What would be amusing is if: You ordered an extra right arm piece of the driver; cut the right arm off the passenger; drilled through the passenger shoulder to make a linkage to that servo; then connected the driver right arm to the passenger right shoulder in a raised position so that the passenger appears to be waving to the adoring SBG/HD crowd as the buggy drives past. Just a thought. That leaf spring kit for the VS410 is going to make Josh groan, which is perfection.

[@MasterApeFPV]

I thought the same, just that the arm should slap Josh every time you accelerate. I don’t know why I woke up today and chose violence.

[@verpine3534]

@@MasterApeFPV

[@scalebuildersguild]

Sounds like a hilarious idea, thank you! 👏

[@brettheilman7969]

Build more steel components, it's more scale than 3d printed crap

[@scalebuildersguild]

You go ahead and build that functioning interior out of steel then. 😂

[@brettheilman7969]

@scalebuildersguild yeah actually I build it fron aluminum budd.....lmfao

[@scalebuildersguild]

@@brettheilman7969 Yeah? A two driver interior with both animated heads and arms? I'd love to see that! Got a link?

[@longtalltexanrc3358]

Great episode. I absolutely love the optic interior. Knights Customs does such good work. CUCV is looking remarkable as ever!

[@scalebuildersguild]

Thank you!

[@just.jose.youtube]

Wow! That wrapped Optic looks really amazing!!! Awesome job Matt! Looking forward to see those two half guys painted and installed. Cheers!

[@scalebuildersguild]

Thank you! Stay tuned!

[@tomjohns8498]

Best 👌 bit of my week 😊

[@scalebuildersguild]

Thank you!

[@cablety]

Josh’s head needs to turn to you when you’re not on throttle 😂 “you can’t park there” moment

[@scalebuildersguild]

😂

[@brandongeiger1684]

Hell yea to never painting again

[@P_Hamtramck]

If you were Sisyphus the CUCV would be your boulder! 🪨 (It looks super good and I enjoy seeing how it's progressing! 🙂 )

[@scalebuildersguild]

Thank you!