Are spacers worth it? www.customwheeloffset.com #customoffsets #trucks #liftedtrucks
Пікірлер: 510
@mmix2242 жыл бұрын
Spacers seem like a great way to blow out wheel bearings more frequently. Something about moving the load further away from the bearing seems like it would add significant additional stress to the bearing. Now I'm not a mechanic or an engineer, but I play one on YT
@rfvc600r2 жыл бұрын
Don't buy cheap bearings next time
@staples1382 жыл бұрын
@@rfvc600r just don't put spacers on at all. bone stock is literally better in every way except esthetic.
@rfvc600r2 жыл бұрын
@@staples138 aesthetics are for pussies
@tannerbrinkman67902 жыл бұрын
Same thing applies to greater negative offset wheels. Negative offset and wheel spacers are definitely gonna wear out parts faster. There's a price to pay for that stanced look, but if you're like me I think it's worth it for that look.
@mouaxiong86182 жыл бұрын
Put them on straight axles. If you put them on a vehicles with arms you're pretty screwed.
@gtzgreatride2 жыл бұрын
What they don't tell you about these wheel spacers: it's much harder on the bearing. Sources: SKF and timken.
@mitchellbrown70222 жыл бұрын
I have over 100k on hub centric spacers. Both my 4runners that run them have 225k+ on them with factory bearings. It may speed up wear a little but I'd be more concerned about the heavy wheeling ive done on both of them. They are also Japanese so American trucks probably fail sooner, but I'd suspect that would be the case regardless of spacers.
@moctezumaaleg20082 жыл бұрын
@@mitchellbrown7022 Nice to Know I bought a 2002 Tacoma from a older guy its clean and stock except for the spacer I think is like 1inch and second gen wheels on it. It has 195k miles.
@ineedapharmists2 жыл бұрын
@@mitchellbrown7022 bro, it's a yota. Chevy ain't going last 6 months with spacers on factory bearings
@Dat-plati Жыл бұрын
@@mitchellbrown7022 I’m sayin man, my truck has had 26x16’s on it since 500 miles and now it’s 52k miles, same hub bearings since day one and they are extremely tight still like new
@junkyarddog82772 жыл бұрын
Thanks for your dedication to making the ugliest trucks on the road.
@Maxllerrelic2 жыл бұрын
Lmao you probably feel Intimidated
@johnmosesbrowningsrightnut86422 жыл бұрын
@@Maxllerrelic I know I'm not. My stock 1984 K30 flatbed is about 100x better looking, and 100x more useful than this pavement prancing grocery getter.
@junkyarddog82772 жыл бұрын
@@johnmosesbrowningsrightnut8642 these 100k trucks doing absolutely nothing besides hauling their boyfriend's to the vape store is hilarious
@johnmosesbrowningsrightnut86422 жыл бұрын
@@junkyarddog8277 exactly. I have trucks I bought for 2000 dollars that can outwork these shit boxes any day of the week and it makes me insanely happy
@reidthompson89792 жыл бұрын
@@johnmosesbrowningsrightnut8642 your K30 🤝 our 1969 Jeep gladiator, being great looking work trucks!
@blank-re8qv2 жыл бұрын
just buy the right damn wheel specs lmao
@blank-re8qv2 жыл бұрын
@Maudi Yuni 🇵🇭🇵🇭🇵🇭
@SpeeeedyG2 жыл бұрын
Even if you did on chevys the front wheels will stick out farther than the rear wheels. I don’t run spacers I just deal with not having the “even” look. I’d rather be safe towing 15,000 pounds than have a spacer fail and lose my truck with the load.
@HitLeftistsWithHammers2 жыл бұрын
spacers are for people that are way too stupid to understand simple wheel specifications.
@mikeslife59412 жыл бұрын
I gotta say this look for trucks is ugly I’ll keep it original
@ezduzit33482 жыл бұрын
i did and it ate thru my upper control arms lol i need them
@Adam-eu5rn2 жыл бұрын
Pavement prancer
@chortie89272 жыл бұрын
Okay Adam
@johnmosesbrowningsrightnut86422 жыл бұрын
@@chortie8927 he's right, he took a perfectly good truck and made it useless.
@ratpatrol63562 жыл бұрын
@@johnmosesbrowningsrightnut8642 you can haul a lawnmower still 🤷♂️
@johnmosesbrowningsrightnut86422 жыл бұрын
@@ratpatrol6356 or a box of dildos. So I guess it still has some use
@rodrigocruz41572 жыл бұрын
@@johnmosesbrowningsrightnut8642 good thing it’s not yours
@abingham37472 жыл бұрын
Let's talk about trucks that serve the same purpose as a Honda Accord.
@abingham37472 жыл бұрын
@@notsevenfeettall solid point.
@S_A_L_A_Z_A_R3005 ай бұрын
If you're broke. just say that.
@Dunno5132 жыл бұрын
But I want to look like a looser driving down the road….
@quirinonavarro18572 жыл бұрын
Instead of keep adding extra parts, just buy wheels whit the correct backspacing… saludos!
@calvins18372 жыл бұрын
Sure but how could you make it look stupid doing that? Well I guess squat it 😆
@allrimmedout Жыл бұрын
very good term to teach would be the word "scrub radius", which gets worse and worse the more you offset your wheels. your turn radius actually shrinks as you go further out from center after a certain point.
@chemicalwarfare13882 жыл бұрын
You shouldn't even be running spacers. It's considered a modern hack job. Drops the reliability of the truck. More for show than anything else
@CustomOffsetsTV2 жыл бұрын
Makes sense, we are a show truck company...
@1986subway2 жыл бұрын
He said a show truck company 😂😂👍. Somebody get this guy, some fingernail polish and some hair dye
@MichaelPonton2 жыл бұрын
And always torque those spacers to spec, with torque wrench 🔧🔧🔧
@CustomOffsetsTV2 жыл бұрын
Big facts!
@403outdoors42 жыл бұрын
And remove the wheels after 100km and re torque them.
@NateForTree2 жыл бұрын
@@403outdoors4 yessir always after the first 500miles of installation
@chrisnigro82202 жыл бұрын
I just say click out loud when I can’t get anymore out of 1/4in socket
@connorhammac11472 жыл бұрын
I just use my snap on impact. They don’t move after that 😂
@michaellittle76462 жыл бұрын
That's a nice pavement princess 🤣🤣. I want to see it off road.
@chortie89272 жыл бұрын
It’s a show truck
@ineedapharmists2 жыл бұрын
@@chortie8927 that's the point. It's a show truck. Useless on Anything other than newly paved roads. Anything else it gets stuck or crack your rims
@thetrutha21772 жыл бұрын
@@chortie8927 yes it shows how gay he is.
@emiliademarcus9235 Жыл бұрын
@@ineedapharmists but why does every truck need to be a dedicated off-roader? People have different opinions about cars
@DoubleOhSilver Жыл бұрын
@@emiliademarcus9235it's a truck. It would actually make sense if it were a car
@rustybritches67472 жыл бұрын
#DONTUSESPACERS!
@milodillio62582 жыл бұрын
"Let me teach how to make your vehicle look like a clown car".
@jeffbryner5355 Жыл бұрын
Lmao!! I can show you how! There called donks lol these are just as bad lol
@ConnorDonahoe27122 жыл бұрын
If anyone has ever watched the older whistlindiesel videos you'll know these things don't break as long as they are made from quality material and are hub centric. I run 1.5" adapters on my Ranger just to fit the TRD Pro rims and they've worked great on and off road. Haven't backed out or loosened on me. Before that I had 2" spacers on my other truck and those loosened up after about a year, but you're supposed to check them sooner then that anyway, so that was my bad. Luckily no harm was done. But these guys are just a middle man for Motorsports Tech that actually makes the spacers, you can order directly from them which I did the second time around after these guys dropped shipped it to me direct from manufacturer and charged me $30 extra for their trouble.
@72gunslinger2 жыл бұрын
Worrying about spacers when you need a solid axle swap,cv joints🤣🤣🤣
@MichaelBacon2122 жыл бұрын
Another amazing WISCONSIN COMPANY!!!!! @Custom Offsets you guys are awesome!!!!!
@CustomOffsetsTV2 жыл бұрын
🤟😎 Appreciate ya!
@jessedeering51212 жыл бұрын
Look at those low profiles on a truck, oxymoronic to the max.
@Ryan_Toppi2 жыл бұрын
Run bora spacers, order longer than studs or cut off stud, tight to spec and you will have zero issues. Anyone saying different either didn’t use bora or didn’t do the others correct.
@dutch41178 ай бұрын
I’m not a fan of that setup but I am so jealous of how clean everything is… lol
@tsaa59022 жыл бұрын
Those trucks lmao. Its like taking a corvette and putting a 4in lift and AT tires.. nvm that would be dope. You guys should start that trend.
@CustomOffsetsTV2 жыл бұрын
🧐
@Familyiseverything97210 ай бұрын
I love that red and black wheel on the wall
@rodriguezdelbydr2 жыл бұрын
If you install spacers junk the vehicle 2 seconds later. All you would gain from installing these junks is suspension parts failing prematurely
@georgejung30832 жыл бұрын
Dana : he makes me the most money for his shinanaggins I mean shenanigans 😂
@yahweh1x5432 жыл бұрын
Spacers only hurt you. Change my mind.
@chortie89272 жыл бұрын
Better looks
@yahweh1x5432 жыл бұрын
@@chortie8927 Maybe if you have no idea what you're looking at. ¯\_(ツ)_/¯
@ifyourmarriedyourasimpanda74402 жыл бұрын
@@yahweh1x543 or no idea what the point of a truck is.....
@chortie89272 жыл бұрын
Works on a show truck
@yahweh1x5432 жыл бұрын
@@chortie8927 What are they showing? That they don't how to build a truck properly? I'd laugh if someone was proud of that shotty work.
@amaterasu88292 жыл бұрын
I just run spacers on my 370z to have better looking fitment, until I get new wheels for it. For me spacers are temporary.
@SJNFAB Жыл бұрын
YOU EVER GO DOWN A MUD OR GRAVEL ROAD WITH WHEELS STICKING OUT PAST THE BODY.. IT SCRATCHES THE FUXK OUT OF YOUR PAINT. 😬
@war2thegrave Жыл бұрын
That thing isn't going down any mud or gravel roads. driving down anything other than the most pristine newly paved roads would cause those rims to shatter.
@MannyGunzz2 жыл бұрын
Don't use spacers... Just buy the right wheel it's gonna cost u more in wear n tear in long run ....
@HILLBILLY_HARD2 жыл бұрын
Spacers are never a good idea on anything you want to actually use!
@fordxbgtfalcon Жыл бұрын
I can’t believe people actually do this to their truck and think it looks good….
@loganthesaint2 жыл бұрын
Me with my non hub centric 3” wheel spacers at 80mph.... Yeehaw
@315Stain2 жыл бұрын
No worries, im not putting goofy ah wheels on my truck, because I dont have one.
@cjbarlow61Ай бұрын
Spacers are for looks only. Dont run them for offroading or towing. But on that truck, everything is just for looks.
@ivanbravo6986 Жыл бұрын
Thanks for adding to the thousands of videos already on YT that explain spacers much better than this video.
@chuckcraig4380 Жыл бұрын
Hub centric!!!!! KEY term to getting good parts!!! Listen to the man
@heathkill4821 Жыл бұрын
Read the package they come in Number 1: not for roadway or highway use Number 2: offroad use only and even then they break studs or come loose and fall off
@dadgarage7966 Жыл бұрын
Right. Spacers. That's the trick.
@UncleScoob2 жыл бұрын
I have 2 1/2" hub centric 6061 t6 billet spacers on my 08 silverado (4 1/2" lift on 33x12.50r20's on factory 20's) and I haven't had 1 single issue with ball joints, wheel bearings, tie rods, anything. I always recommend hub centric spacers for every lift I install if the customer doesn't want wheels at that particular moment in time.
@BlackopsML102 жыл бұрын
Only have spacers on the rear to have same width, but I’ve heard so many people having wheels fall off, torqued mine twice in a few hundred miles and check anytime wheels are off.
@seymourbutz69512 жыл бұрын
If your a silverado guy, try shaving down your calipers . Better than runnin spacers. Gave me enough clearence.
@sjfk13062 жыл бұрын
Or, just get wheels that fit correct from the beginning….
@Dr.Mcstaby Жыл бұрын
I just need a 1in spacer on the front of my ranger so i san put 18in mustang rims on the truck without hitting the control arms, cause then i could us my mustangs rims on my truck when its tires get a flat. Also cause i can find mustang rims everywhere.
@L34dF4rm3r2 жыл бұрын
not taking advice from someone with a rough country lift would be a good start too
@ineedapharmists2 жыл бұрын
Ooooooo.
@thetrutha21772 жыл бұрын
Rough country is okay for the price, there are much worse companies out there. If anything this e gay ass wheels should be a red flag
@msnapp1692 жыл бұрын
Never touch a vehicle again 😑
@chortie89272 жыл бұрын
Why
@ifyourmarriedyourasimpanda74402 жыл бұрын
Fax
@RichardRecupero Жыл бұрын
Raise your hand if you are stock. ✋🏼✋🏼✋🏼✋🏼✋🏼✋🏼✋🏼✋🏼✋🏼
@off-roadingexplained8417 Жыл бұрын
Yep ! That's why I have spacers... Rubbing the control arm with larger tires. Not any more ! Fixed !
@futzsavant73812 жыл бұрын
I thought u could only put spacers on early 90s Civics when u throw on 26” rims.
@CustomOffsetsTV2 жыл бұрын
So you thought
@TeamWinnieRacing2 жыл бұрын
@@CustomOffsetsTV doesn't happen often. Enjoy it.
@cazador954 Жыл бұрын
Great Job everyone get wheel spacers and save al you can to be prepared to be changing wheel bearings
@chrisallen38392 жыл бұрын
I got 15s from yall for my 03 silverado, they too small for the brakes, but I cant return them, had to rebalance them since the weights fell off they scuffed them, would a spacer help its 0mm offset
@anthonyhales4192 Жыл бұрын
Been running spacers for 5 years now not a single issue no alignment issues nothing
@ashtonmariefranklin725 Жыл бұрын
Many states D.O.T. deems spacers illegal for road use.
@Pork-Chopper Жыл бұрын
Totally spaced out! Like the owner... 🤔
@AmericanFry Жыл бұрын
I ain’t gonna listen to a guy that lifts a truck like this, I put spacers on my jeep to have clearance for 37”s to turn all the way
@Dumbass_mechanic2 жыл бұрын
Spacers aren't bad. Make sure you use a hub centric spacer, make sure you torque the spacer on just as you would a wheel, make sure the studs of the vehicle don't stick out so far that the wheel won't seat properly, and you'll be ok. Maybe someone could do a video about the difference between a hub centric spacer and a.... whatever cheap spacer. Hub centric is very important on a truck especially if you intend to use it as a truck.
@jeepwk6.5L Жыл бұрын
You mean to tell me it’s not designed to make me look like a douche? Dang, almost had me sold.
@IDAHOJAKE13 күн бұрын
Please truck guys stop doing this with lifted trucks with super wide spacers and low pro tires. It looks ridiculous.
@GabesLifeStory Жыл бұрын
Say it with meee ✨pavement princess✨
@timothybalzano93552 жыл бұрын
Adding those automatically puts negligence in your corner. Wheelbase is "engineered". If you want to underduty your truck , throw em on. Get weaker rims and stretch those c-/d-rated tires. There's a reason tires/rims have load/speed ratings. If you want convert to 19.5's
@thomasridgdill21652 жыл бұрын
Apparently they are only for the front of a vehicle. 🤔 If you can't afford new offset rims and just need a little space on your solid axle rear end to avoid the occasional rub on the interior side of the fender why not?
@joetroutt74252 жыл бұрын
If you see a vehicle with the wheels sticking a foot out from the fender for sale then don't buy it. I'm sure it's got a lot of issues.
@charliemiller5350 Жыл бұрын
“Hey! Let me teach you how to look like a complete fool!”
@carsacrossmissouri32505 ай бұрын
Looks like my truck but mine is better. I got 6 inch fabtech with fuel maverick 24x14 chrome.
@anthonyz9632 жыл бұрын
So you get just wider tires and rims to make it stick out?
@carlcullen934 Жыл бұрын
I don't want spacers and I like a more stock looking rim but fancy (black or anything but chrome) anyone with tips thanks 👍 much love
@keithmason2854 Жыл бұрын
If you have the money for big tires and rims buy the correct wheel to match your build don't put that garbage on you truck. You will be replacing hubs and ball joints unless you enjoy working on your truck monthly.
@someone46018 Жыл бұрын
That's the easiest way to mess up the steering, balance, and make your ride dangerous.
@timkis64 Жыл бұрын
spacers are just wheel bearing killers.there are more than just looks designed into wheel offsets & backspacing.
@pantiesgonewild3582 жыл бұрын
make sure u get the good hubcentric spacers minimum around $500, dont cheap out spacers less than $500
@Gowieee2 жыл бұрын
Spacers are bad news. Don’t be cheap, do it properly and get offset wheels.
@jimmyh65792 жыл бұрын
I can't wait for this stupid trend to stop on trucks (squatted, jacked idc) A truck is for work. Raising the bed so i have to lift tools and materials higher is dumb asf.
@CustomOffsetsTV2 жыл бұрын
All depends on who the owner is, not everyone has the same reasoning for getting a truck, that's the joys of the truck enthusiasts out there, there is a variety and everyone has their own tastes
@toyotabrony2 жыл бұрын
Hey it is what it is man. It’s not always just working tool truck. Modified trucks for looks, style, daily driven, racing trucks, off-road trucks can be used in many way. Not just work. So get over it
@toyotabrony2 жыл бұрын
@@CustomOffsetsTV amen to that
@toyotabrony2 жыл бұрын
@Jeremiah Schultz we all have different taste. It’s basically a u hate or love it. So sorry, I can’t get over it. I’d still say it’s a very clean truck. We all have our own different taste of what type of trucks we can transform them into. So sit down.
@jimmyh65792 жыл бұрын
@@toyotabrony its a very pretty truck if it makes you feel better. Regardless if it goes against what a truck is meant for.
@senorpepper34052 жыл бұрын
I identify as an oem stud
@apg00142 жыл бұрын
I honestly stopped watching custom offsets since this cat was gone. Don't know his name but I like the guy and he's knowledgeable about his shit
@CustomOffsetsTV2 жыл бұрын
He is still here though....
@danny.98972 жыл бұрын
Some people think that having vehicles like that make them look more masculine but in reality it looks like you're driving around a giant toy truck
@chortie89272 жыл бұрын
You think this comment makes you look more mature but in reality it makes you look stupid commenting this on a custom offsets video, do you now know what custom offsets is?
@simion332 жыл бұрын
You sure showed them by making this comment lol
@ifyourmarriedyourasimpanda74402 жыл бұрын
Eh , it's stupid but I don't really care what other people do with their money 🤷
@spikypikachu1162 Жыл бұрын
Looks more like that they have a problem mentally and possibly physically too
@lilcourtny08 Жыл бұрын
Maybe they don't give a damn what other people think
@FallWarrior-si5eu Жыл бұрын
And not to mention that spacers can stress out the axle
@BabyMandingo7 ай бұрын
I have to use them on the front of my mustang. I hated how ford did two different offsets for the front and rear on the 15’s. I got a square aftermarket setup so I needed the fronts to even them out… and not hit the new brembos 😂
@patrickcoyne12922 жыл бұрын
how about don’t make the truck look like this period
@CustomOffsetsTV2 жыл бұрын
Everyone has their own preferences
@toyotabrony2 жыл бұрын
How about let everyone make their own truck look like that, their money, their business. Period.
@Espankyz452 жыл бұрын
Don't run spacer ( shake, tires can wear uneven,more stress parts ) and don't cut your studs if the lug nut don't turn 5 times
@danielbrealey2924 Жыл бұрын
These are hinge are illegal on street cars in my country- both hub- centric and non hub- centric and illegal. Just buy the correct offset wheels to begin with
@backyardbuilttrucks12 жыл бұрын
Buy the right backspace wheels to start with.
@hanzgrueber145 Жыл бұрын
So guys If you don’t want to replace your wheel bearings every 20-30k miles, don’t buy spacers get proper fitting wheels and tires. Worked on a 2019 Wrangler with some massive 35” tires on it and at 40k miles front left bearing was screaming for mercy lol
@absoluteqw2 жыл бұрын
Had them price four spacers and they quoted me over $1000.00 I had a custom machine shop fabricate them for less than half their price.
@CustomOffsetsTV2 жыл бұрын
Thats odd, even the most expensive spacers we have on our website, doesn't even come close to $1000 for a set of 4
@absoluteqw2 жыл бұрын
@@CustomOffsetsTV quoted me $460 per axle. I really like the products, but the price was too much for me to justify.
@TheRealLemongrab Жыл бұрын
I drive a widebodied 8th gen civic sedan, it’s hellaflush so it’s low as hell, no air ride just static, I get stuck on dips in the road. I’m not one of those guys who is all show no go, my little civic has 468hp and the car weighs around 1800lbs so it gets up and boogies🤣
@wakeupamerica46102 жыл бұрын
Spacers are not a good idea,they change the weight dynamics on wheel bearings , spindles hubs etc.
@elitegamer17252 жыл бұрын
Just be careful when you space your tires out. Cuz you can only space it out 1 1/2 or 2 treads out or else it becomes Illegal
@CustomOffsetsTV2 жыл бұрын
varies on your state but definitely something to look out for
@MR.Kat-zVideoChannel Жыл бұрын
I do not recommend wheel spacers at all farther you put the will out from the hub of the wheel more pressure will be put on the wheel studs so I do not recommend.
@labourlawact7826 Жыл бұрын
Using wheel spacers is a really bad idea. Ps: I'm a mechanic
@nicholastoutant93784 ай бұрын
Spacers are just bad in general. You will be flying through wheel bearings
@chuckdameron5626 Жыл бұрын
Do not use spacers blow out wheel bearings or you will snap the tie rods and you can not go off road because you will tear up your truck
@billythekid6509 Жыл бұрын
I'm curious of why everyone is wanting to push the wheels out like that I mean maybe some big tires where they just stick out a little on there own but not extending them out like that. Well to each is own I geuss
@SlimTheGoat2 жыл бұрын
Talking about spacers like anyone has an extra 6k-10k to blow on wheels 🤦♂️
@nonameisthename1382 жыл бұрын
You gotta pay to play....that's why there's more spectators than participants 🤷♂️
@thetrutha21772 жыл бұрын
@@nonameisthename138 I'm sure all the dudes want to play with him at the gay bar
@JankyDubz19 Жыл бұрын
Imagine just driving the truck for what it is. A truck
@sschevmale24 Жыл бұрын
Dude I've always seen cars f'd up coming into tire shop with spacers. To each their own
@Enju232 жыл бұрын
This'll be good to know if I ever decide to get a wide body kit for my Charger.. too bad I'll probably forget by the time I can get them
@ramboslamboo65712 жыл бұрын
That’s true
@anthonyreddy28342 жыл бұрын
That wheel and tire combo is already going to shorten your wheel bearings.
@ImpHalla662 жыл бұрын
Spacers are always a bad idea.
@brianobrian9334 Жыл бұрын
Can we just have trucks where the wheels don't look like a stepped on hot wheel.
@simion332 жыл бұрын
Spacers got me addicted to drugs. #saynotospacers
@apaulotroughtzmantz29142 жыл бұрын
The biggest fans of these spacers are wheel bearing manufacturers
@jamesfernandez652111 ай бұрын
Or just find an aftermarket wheel that hub centric to your vehicle.