How to Build & Install Pull Out Shelves - DIY Guide

[@JoeyRam.]

I wonder where in America or internet, I can find good sliders like those you are using. Are they specify by weight resistant?

[@DPShopTalk]

+Joey Cymbals I always use 100 lb weight rated slides for drawers and pull outs. I'll put a couple of links below for slides that I've used and recommend. Accuride makes a high quality slide. They are a bit more expensive but are less greasy and work very well. amzn.to/2y8D3Di The Pro Series slides are much more economical and still work very well. I find they do have a bit more grease on them so I usually wear a glove when handling them like I did in this video. That avoids getting grease on the finished project. I've used these slides on a lot of different projects from pull outs to kitchen drawers. amzn.to/2xqKYrM

[@eh_bailey]

Same. I've used 100lb and seen others do the same. It seems to be a good rule of thumb.

[@JoeyRam.]

The links are backwards but I get the point. I have them both in my Amazon's wish list. Thanks for bother in looking the links for me. That's very kind, have a great winter!!

[@Fernanderas2011]

U.S. INDUSTRIAL TEMPE, AZ Lost of stuff hardware for cabinet makers

[@jennyblair331]

Dan Pattison P

[@thehonestman26]

I really don't understand people giving this a thumb's down. Most people click on the video, because they have an interest in learning how to build shelves. If this is you, and you gave it a thumbs down, do you know how much free information you just got? If you got this info in a college course you paid for, you would be thrilled. You just got that for free from the comfort of watching it on your screen wherever you are in only a few minutes. Whether you agree with everything he did or not, the amount of information that can be absorbed is pretty amazing. Think about that.

[@DPShopTalk]

Thanks for your comment Robert, I appreciate it. I've never really understood the thumbs down either. Even if I don't really like a video all that much I'll just move on and not give it a thumbs up. Like you said it's free information that someone has taken their own time and resources to create. In my opinion, unless a video is very offensive, a thumbs down is just rude.

[@gwendolyncollins9109]

OMG Robert! I 100% agree about the wonderful free information that Dan is giving. My husband and I know absolutely nothing about carpentry but are trying to learn if we can find a very simple but effective way to retrofit my very small, (appx 5’x13 in double door pantry), with shelves into our 1925 bungalow. I just came home from having a double mastectomy and cannot lift heavy objects anymore. Dan’s is gifted and I truly appreciate his videos. Dan you get 2 👍🏿👍🏿👍🏿👍🏿 from us. Stay 😷

[@michele2161]

He's a pretty impressive dude.

[@ScepticPJ]

@@DPShopTalk Dan, you said it all in that last sentence. Unfortunately that is how our world is going lately. Very sad.

[@danielcarroll1445]

I often see these thumbs down replies and don't understand them either. I think some people click thumbs down to every video they watch. Very negative and unnecessary.

[@organize1979]

I always thought I was the only one who would write something like 23 1/4 (-1/32) on my cut list. But you’re right, it’s faster and easier that way. I like the style of your video. It’s concise and easy to understand!!

[@uhN0id]

Easily the best video on this topic. So many videos skip the important details for measuring the width of the drawer which for me is the hardest part to get right with my project (doing the same thing of adding pull out shelves in my island). Thank you!

[@ldwithrow08]

I like to make the rails across the back a little higher to keep things from falling off the back of the shelf.

[@photojournalist1194]

Good idea.

[@howardbecdove9780]

I reckon this is the most comprehensive tutorial I've seen on making and retrofitting kitchen drawers. I'm saving this one for future reference. Brilliant idea, on how not to get confused in the final figure, by deducting the 32nd afterwards. However, had to lol - unnecessary and far simpler in metric. Yes, to further tutorials.

[@DPShopTalk]

+howard dove Yeah for things like this metric would be simpler. I use metric for some hardware installs but still build most things in imperial.

[@NorthWalesCampers]

What a great tip. I'll surprise the wife with these. She'll love them. Saves her struggling to reach at the back of the cabinet.👍🏻👍🏻

[@mybabybookpage]

What a great husband!!

[@LaPauly]

@@mybabybookpage my thoughts! So sweet!

[@LadyPurple911]

My husband said, hey, I would love to build those pull out drawers for you but I am not sure how. I said you know me, the research queen. I will figure it out. And then you came along. I just love your presentation. I may not have all of the tools you have but we have some of them. Great job and thank you!

[@jthornberry2]

Wow... Just, WOW! Your thoroughness and attention to detail nearly brought a tear to my eye. I'm really looking forward to watching your other videos!

[@chaplainand1]

Thank you. I appreciate your skill as a crafts-person, problem solver, teacher, and videographer.

[@scottdoremus4735]

Dan, You have the best shop productions around. I don't know how you do it but, they are just the best. Best teaching personality, detailed and professional production. Keep up the good work and don't change your style.

[@DPShopTalk]

+Scott Doremus thanks very much for the feedback and kind words, very much appreciated!

[@GordonBaird]

Thanks for the detailed and thoughtful video, Dan. Using your steps I was able to retrofit a poorly laid-out cupboard to instead be much more useful thanks to pull-out shelves. While mine were rather significantly more 'aesthetically challenged' than yours (thanks to inexperience and a more limited tool set), this video was the key to helping me complete my project. Appreciate it!

[@armedmariner]

I’ve watched several example videos for pull out shelves. This one is the most comprehensive and best tutorial. Much thanks.

[@dhblan8591]

Great and detailed video. Doing measurement calculations using metric is so much easier. No dealing with 1/32 or 1/8. Simpler to use cm and mm and all the same. Thank you.

[@hatemdamra9536]

U sir are a breath of fresh air. Thank you soooooooo much

[@jk082707933]

Thank you, your videos​ are concise, your work is clean and accurate. I really enjoy watching your videos.

[@billflyyeung3954]

Sir. Your work shop is cleaner than my living room. Your dress up above my church going wear Thanks for the top notch video

[@davidabineri908]

Yes, Let's see more how-to explanations and demonstrations, you videos are very well done and also complete in their detail.

[@johngrannan]

Great video again Dan. Width formula obvious when you think about it, but seeing it explicitly shown like this just adds to your confidence when doing jobs like this. Thanks!

[@fernandomedeiros871]

I always enjoy watching your videos . You're a real pro. Very informative and educational. Well Done !

[@madaboutlife7592]

This is a job I need to do and feel much better tackling it now that I've seen your video. Clear, concise, you speak well, and dish out pertinent facts without waffling through the topic. A very big thumbs up from me.

[@DPShopTalk]

Thanks very much! Glad to hear that you found the video helpful.

[@Calipso0007]

This was the best tutorial video I've seen on You Tube. Very professionally done. Thank you, just the encouragement,t with a fantastic tutorial, that I need to start my project.

[@Chatillgbt]

loved it! You've explained the whole process so well that it left me feeling super confident!

[@sringer62]

One of the best, clearest, and detailed tutorials I have seen on-line. Thanks!

[@DPShopTalk]

+sringer62 thanks, glad you found it helpful!

[@amberswartz3876]

Thank you for also posting a link to the sliders you used! This video is very helpful! Thank you for walking us through the process! My husband and I have an old house with a 1960s kitchen. Our Cabinets are outdated, but still rock solid. This will help us to add some updated storage!

[@mikes6844]

Hi Dan, thank you for this insight into making and installing these pullouts. Very informative and for me these subjects are pretty spot on. I have installed pre purchased pull outs but yours look more part of the unit. Regards Mike

[@grannywarrior]

Excellent. You start with the basics and point out the things diy people might not think about, like the cabinet facing. An outstanding tutorial.

[@billedis5482]

When I build base cabinets I use only drawers with full or overextension guides. Eliminates the need to open and close doors to retrieve items from the shelves. Of course I realize this is an after install situation. Thanks for your informative videos. Bill

[@DPShopTalk]

+Bill Edis drawers are definitely nice to avoid having to open doors first.

[@susanpeterson9558]

I have been putting off this part of my kitchen remodeling. This was the BEST video. Love the width formula. This is really going to help me finally finish my cabinets. ❤😊

[@markwatkins2963]

Thanks babe, now I’m officially a pull out king! Still working on the full extension

[@venderitso1929]

Very nice and fluent voice I'm glad that you share this type of setting of drawers i love that...

[@stephaniepankiewicz645]

This is an excellent video- I especially appreciated the help with measuring correct lengths for the drawer itself. I would love more how to videos- Keep them coming!

[@DPShopTalk]

+Stephanie Pankiewicz thanks! Glad you found it helpful.

[@FreakyFraser1]

Video saved and the planning begins. I finally know how to organize my disaster of a pantry. Thank you.

[@lkenady52]

Best instructions I have seen. Thank you so much as I need to build this in my cabinets. I will have your instructions playing as I construct!

[@shopart1488]

I use solid wood on each rail piece and rabbit a 1/4” slot for a floating 1/4” plywood bottom the latest job I did was 14 pullouts all maple with 2 coats of sprayed clear finish. This makes for extremely strong shelves which will never be susceptible to kitchen moisture. I like to use KV slides. As for the set up for install you are spot on. Nice easy to understand video!!

[@kensfixing7583]

Dan, amazing video and job on the pull out shelves. Thanks for the tips and short cuts to my next project.

[@kiranrai2785]

Excellent presentation, I have been wanting to do this for a long time, you have made my task so much simpler! Thank you!

[@brentjohnson6654]

New subscriber here. This was very useful for my project in my kitchen. I am retired and am a hobby carpenter more familiar with framing and not cabinet making. I have a couple of lower shelves in my cabinets that need some love. Also am considering asking a DIY hidden corner with slide out. Thanks again for your video. All the best in 2024!

[@paytonjohnson660]

Thanks for the step by step video. My wife’s been asking me to do this in her (our) kitchen.

[@karencurtis2697]

KZbin recommended it always makes great choices just when I'm thinking how to try a new project, going to try a small cupboard first for my pan lids and smaller pans . Subscribed and looking forward to binge watching more. Stay safe stay well

[@jeffreyblichtman409]

The best video on this topic that I have seen.

[@ronstar8857]

Great video! It makes a complex project seem very simple. Thanks for sharing your skills!

[@shopart1488]

To save some screws and holes I use solid maple rails with 1/4” dado to accept shelf bottom which is also 1/4” maple plywood. I do not glue bottom to rails I leave it floating. I have shelves filled with over 35# of can goods and still holding strong. For finish I use a commercial sealer and spray finish as we have a commercial wood working shop.

[@BasBleu02]

This video is exceptionally helpful! I'd love to see more how-to videos like this. Thanks so much!

[@santoni58]

Whoever gives thumbs down is a person that does not appreciate or see the difference between paying for this free education or not having this present resource. I am 65 years old, I which we had this information in this format in the 60’s, I would have become a genius 😂. For the haters, my daddy always said, if you ain’t saying something nice keep your opinions to yourself.

[@AlainFaubert-ut9rx]

Best instructional video I've watched in a long time. Thank you for that.

[@DesandSam]

Nice video, Dan. Well presented and very informative. Keep up the great work.

[@asignman3889]

thank you ! I just subscribed to your channel. Because of your clear presentation at every level. Thank you again. Have a nice day.

[@Checkthefineprint]

Goodness you make that look so easy. Nicely done and great results. I may have just gained the confidence I need to undertake this project. Just one Rollout for a laundry hamper setup.

[@spicyhot1695]

Excellent video! Dan you are an awesome teacher. Your explanation is crystal clear making it easy for anyone to understand. Thanks for sharing

[@pat9166]

Loved your video, very well organized and meticulous, bring us more

[@beauxtx1959]

I'd like to see more how-to videos. Thanks.

[@jeremyhull]

Excellent, clear and well organized video, thanks. I will be adapting the instructions to install shelving for a set of five stereo components (amp, turntable, tuner, cassette player, and cd player) into an existing closed-in cabinet space. My main problem is how to manage the various cords and cables required for the various units. Possibly there is other useful information online that will help me with this. Otherwise you might consider creating a how-to video for something like that.

[@DPShopTalk]

I would say installing cable grommets and conduits would be a practical way to keep everything organized.

[@nofearinlove]

Pullouts are great I have one cabinet with them but I wish they all did!

[@vickimason2905]

great detailed video, I enjoyed the details, I'm going to make these for a messy pots and pans cabnet.

[@perrytownsend1378]

Thanks for sharing your expertise. I have to do something similar to this for a friend of my wife. You are going to make me look like a Pro, thanks again for sharing.

[@KebriteSolutions]

thank for the great video. I've been meaning to do this for a long tome and you technique is a great reference tool.

[@IMOO1896]

Just what I’m looking for, retrofit drawers!

[@toddray275]

I would definitely love more tutorial videos like this one! Great tool for beginners like myself.

[@JamesEberhardt]

Thanks for the very detailed video. I've been looking at adding these to my bottom cupboards, and thanks to this video, I've got all the information I need to complete this project!

[@josephKEOarthur]

I do like the fastcap screw covers.. well shown. (Now im going to 3d print my own) - thanks.

[@ronaldkirchoff938]

Great video Dan! I vote for more.

[@doubleexposurephotographer]

This video really helped me complete my project faster and easier. Thank you very much!

[@Beyondrandom]

as always, great video! as soon as I get a notification of a new video I have to watch it immediately. This is something I've been wanting to do in the kitchen for a while but never found any good instructions on the process but you did great!

[@mmlips]

Thanks Dan, got a linen closet that's gonna get some!

[@dennykrynicki6]

I enjoyed your descriptive style. Very clear and easy to understand. Look forward to viewing more of your tutorials.

[@DPShopTalk]

Thank you!

[@josephsemper4356]

Great video. I have been looking for something like this for a long time. Thank you!

[@ortizle1]

You made it look so easy. Thanks for sharing.

[@DJE-motion]

Loved it! You gave a great explanation of "how to." Looks easy enough for me to tackle. Thanks!

[@nylabone8782]

I have been following your channel for a while, and it never disappoints - another great video. thanks buddy.

[@macgarth]

Thank you for the detailed video!

[@sandrapinkney]

Wow, you are so organized. Great explanations.

[@irenecase1933]

very nice video. makes me want to finally get to my kitchen cabinets.

[@karinecarde1254]

Great organizational demonstration!!! Thank you for sharing your craftsmanship & knowledge 😊

[@davamarriott3693]

Thank you! You are a good teacher!

[@AG-cu9or]

Great tutorial. This will equal a lot less trial and error (aka wasted materials)

[@dgarvin57]

Really like your cut list at 12:52. I hope you don't mind but I made one similar to yours. Very helpful. Thanks.

[@roschellerumley3566]

Great job and good instructions.

[@Robe999]

Hi Dan , just found your Channel , Thanks so much for taking the Time to share this , Finally someone doing as easy way to make a draw , Great Explanation

[@francishetherton1837]

Great helpful video plus a fine argument for metric system

[@oppsss8904]

Well done. It’s very well detailed. I guess I m all clear now. Thanks.

[@400080vikkash]

Great explanation video!

[@lesliesotomuniz125]

Excellent explanations. Thank you. Dan

[@janesfavsvideos]

Love that you included the math

[@robd7703]

Dan, This has been very helpful. You have a good way of explaining the process. Keep up the videos.

[@bholston208]

Great video, I need to build some for my cabinets

[@jeffreyfields2231]

I really enjoyed this video and look forward to more like it.

[@aaronalquiza9680]

You. You deserve more subscribers.

[@mildredi5408]

Good video. Very helpful 👍

[@edaloychannel7879]

loved the way you teach.thank you for this video. its very helpful

[@AndyMcMenemy1952]

Excellent... have just added this to my list of projects!

[@ramonleano1673]

Excellent work. Thank you for the video.

[@bobramos1604]

Thanks,very clear, I’d like to see more

[@ugbodumelucky6533]

good and nice process

[@wildomar1987]

Thank you for the great informative video!

[@scottjohnson3226]

Thank you for the quality instructional! much appreciated.

[@ChristopherClaudioSkierka]

great, the idea for spacing inside the carcass was useful :))

[@MrMarkpeggy]

Thank you for your excellent video.

[@TranTheClever]

OMG - this is so great. I've been looking for a clear and concise way to create some for my bathroom. You Rock! 3:55

[@69A12SuperBee]

AWESOME VIDEO!