HOW TO REGLAZE A BATHTUB #5 | Removing Paint from a Tub that has been Refinished before | DP Tubs

A full and in depth STEP-BY-STEP process of Bathtub Reglazing a cast iron bathtub. This bathtub has been painted or reglazed before and I take you step by step throughout the entire process of refinishing this bathtub. A full bathtub reglaze that includes stripping or removing the existing paint, acid wash and deep clean, Masking paper, and final spraying of the bathtub reglazing top coat with the Capspray HVLP Spray gun.
Spray Equipment used: Titan Capsrpay 75 and Maxim II spray gun
Tub Refinishing material: Krylon Tub and Tile 2 part 1:1 ratio
Stripping or Paint Remover: Jasco Paint and Epoxy Remover: amzn.to/3xniGik
Acid wash: NAPCO Ltd Pirhana Etch and Cleaner combo
Comment down below if you have any questions about the Bathtub Reglazing process!
Don't forget to SUBSCRIBE, LIKE, and COMMENT DOWN BELOW!!!
Products Used in Videos on this Channel:
Material Used:
Bondo Fiberglass Resin: amzn.to/3rneluX
Bondo Fiberglass Mat: amzn.to/3cLCiDp
Bondo Glass Short Strand: amzn.to/3xlYuh0
Ryobi Corded Drill: amzn.to/3xkf3K6
HDX Mixing Cup 32oz: amzn.to/3p0JD7L
2" Paint Brush 24pk: amzn.to/3nLdZMd
120 To 3000 Assorted Grit Sandpaper for Wood Furniture Finishing, Metal Sanding and Automotive Polishing, Dry or Wet Sanding, 9 x 3.6 Inch, 36-Sheet: amzn.to/312NYzi
Bondo Spreader Pack: amzn.to/3HNIEAJ
Bondo All-Purpose Putty: amzn.to/3CPE29p
Zinsser 1-2-3 Primer: amzn.to/3oXAmO2
Krylon Alternative: Rustoleum Tub and Tile White: amzn.to/3FFTcQi
Caulking DAP Stretch: amzn.to/30YsZhe
Napco Extra Strong Acid Etch: www.napcoltd.c...
Jasco Paint and Epoxy Remover: amzn.to/3xniGik
Loctite Foam Gap Filler: amzn.to/3xkgTuu
Capspray Titan Compressor 75 / 95:
Titan 0524041 or 524041 Capspray Maxum II HVLP Spray Gun with Free Check Valve Kit 0297051: amzn.to/3CUJo38
3M Half Mask Reusable: amzn.to/3DSmomO
3M N95 Respirator Filter 10pk: amzn.to/3cNv9CI
3M Cartridge Replacement Pack: amzn.to/2ZpjhUq
Fume Exhauster 8" Duct Tubing: amzn.to/3cKe64v
Portable Ventilation Exhaust Fan here: amzn.to/3k5Gz5W

[@msreen269]

NIIICE!!! A “10” rating from 1-10. Great how to video. Very detailed and nothing left to chance. The finished product looked like it was a newly purchased/installed bathtub. Excellent. 👍🏽

[@DPTubs]

I appreciate that!

[@wazup3333]

​​@@DPTubs why didn't you sand after the acid wash?

[@bastianthibodeaux]

I've watched every bathtub reglazing video that i've been able to find on YT. This video is easily the most helpful, thorough, and informative video on tub reglazing that i've ever seen. I just wanna say thank you so much!

[@tonylopez7069]

After starting wrong kinda wrong I decided to watch videos (seems like 30 of them). This (and your other tub-strip vid) is the absolute BEST right down to the Jasco because my research says it's best but the product says not on tubs - Thanks for your input there, now I will usue it. Unfortunately, it's an RV tub and I grinded it down to (nevermind) before I learned just to sand. Thanks so much! I still might need to hire someone but I'll have that experience of knowledge in advance, if I do. Thanks again

[@milcamaximo5619]

Congratulations on the work! Very professional, neat, and satisfying.

[@minervatavarez2972]

Thank you for showing how to glaze a bath tub step by step!

[@lovesupreme6154]

Thank you. Thank you. Thank you! Great video. I transformed a claw foot tub. The key is the Jasco. There was only one can on the shelf - I got 90% done with that can in a hour. The next day it took 2 cans of goof off, 5 hours additional hours and much more elbow grease to finish the remaining 10% - man I wish there would have been a 2nd can of Jasco available. I would say the 2nd most important key is plenty of fresh scraper blades - they get dull pretty quickly - I went through about 10 of them, remember to flip them over and use both sides. Once I was like 98% done I used an electric sander with 80 grit and that got all the little remaining stuff fast and easy. Thanks again, without this video the not for tubs warning on the Jasco would have scared me away from it.

[@Ladyluvjazz]

We

[@waterfall836]

Thank you for allowing me to watch you as you work and explain in details. Great job. I enjoyed the video. The music was A +

[@TheJennayyyyy]

I had to come back and comment here because this video saved me. I spent a long first day super discouraged. Followed this exactly and it helped me remove the finish straight away. Wanted to help anyone else possibly doing the same. I'm so glad I didn't convince myself I couldn't do this. 🥲 If you're refinishing your own tub, do yourself a favor and get a paint sprayer. It can be done with the roller but it's challenging. Also, consider that this might take you at least a couple days. I spent a whole long weekend doing this. Thanks for posting this and helping me, OP!!

[@isabelladavis1363]

It’s nice to see someone take pride in their work!

[@lisablackman2168]

This was so cool to see . I was stuck on the screen in amaze. I dont know why but this was really satisfying to watch something ugly turn so beautiful. Thanks for sharing awesome job Danny.

[@nunkap8874]

Omg I couldn't of said it better! That's exactly what I was feeling

[@kelleybrown840]

Mesmerizing transformation! That is a lot of work, but such a dramatic difference.

[@ashleylauren000]

Yess this video is so good !! my tub has about four layers of paint on it and it peels when I’m in the shower so I got tired of it and decided to start stripping the paint off and didn’t realize How big of a job this is but this video definitely helped and I love how you broke down the products!

[@dirtyvet5404]

Wow, to see it step by step I know the questions to ask my contractor to verify he will be thorough. Thank you.

[@DPTubs]

Glad it was helpful!

[@Palmettomets]

thank you so much for including the equipment you used!

[@carmenr5618]

What an amazing transformation thank you for sharing it's way better looking than what it was.

[@ramonozornio4099]

one of the best jobs I've seen, congratulations, one question: what type of primer do you use?

[@ajjalt2276]

great job!!!! sanding and cleaning are all. these dirty works you must follow. its the most time consuming part. nice step by step video

[@grdsga]

Thought i could DIY this until i saw the paint sprayer LOL I’ll hire someone

[@paulkalaiwaa6825]

Great video! How many paint coats you applied? How much time in between coats? Can a roller be used instead? Pros and Cons? Thanks

[@kevinlightbourne1625]

Well Sir.. how many and how long in between. There's no responses to these questions in comment

[@artcityparties]

Great videos! I was wondering if I use Jasco on my tub could I not reglaze with it if I liked the original tub. Thx

[@anthonyohare2268]

I like the spray better! I've used from Napco the brush on gel type stripper and they tell you to make "x's' on the paint with a utility knife before applying. So messy and I'm looking forward to trying your way next strip

[@4420srt]

Your video gave me the confidence to attempt to diy it. Thanks for these gems. Shit I'd hire you to come do it.... chances you live in central FL are slim. I'll have to get my supplies tomorrow

[@DPTubs]

Do it! Let me know if you have any questions!

[@rachellehmann5044]

Nice work Danny

[@datgurlvp]

You did a wonderful job start to finish! Would you be able to tell me where I can locate the napco ltd piranha etch and cleaner combo?

[@McHellenIsaboke]

Amazing! Totally love your work. I am planning on painting my kid's tub, its an old ugly green, can this remover do the job?

[@jillgasson7355]

What a good Job, looks like new 👏 ❤ love it

[@michaelbaskinmichael9862]

Nice job I can see your a pro hope I can even get close

[@KailahMillen]

Does removing reglazing from a steel bathtub damage it so it has to be reglazed again or can you just leave it off?

[@michaelgordon2860]

Great videos and I'm trying to refinish my tub. Do you have a video where you don't not use a spray device? Something with a roller maybe?

[@dennisjenkins4987]

I have the same question

[@DPTubs]

@@dennisjenkins4987 I don’t show a roller because I would never use one. Messy, inconsistent finish, IMO! There are definitely some DIYers who would use it and that’s totally fine because the spray gun could get pricey. You could use a spray can Homax and they have an attachment that will allow you to spray the can like a gun. Check out my latest video as yiu could see me use it when I spray the primer around the perimeter of the tub.

[@wendybohm8646]

What a transformation! Awesome!

[@DPTubs]

Yeah I like the white better than the Almond color!

[@helentalia9923]

Great video 📹 very informative 👏 needed lighting 💡

[@jen2804]

Will the sanding and spraying the stuff on work if I just want to remove the cheap paint the old sellers painted our tub with? They put some sort of smooth coating on in some areas but abrasive paint in others. I just want to recover the tub underneath, that's all, no repainting.

[@petragrami7143]

Wow!! love your instructions. Looks fabulous and hope I get the same result.

[@tahitinui2010]

Do the cleaning products affect the grout or metal like the drain for example ? To prorect and maintain the shine of the new coating, what cleaning products are best to use on it and what not to use at all?

[@bathtubrenew]

Nice work! Super clean.

[@Izzywizzy74]

Looks lovely, I just ordered the Jaso Paint and Epoxy remover. I can't find NAPCO Ltd Pirhana Etch and cleaner combo? any other suggestions to acid wash and dull the surface?

[@MarcoTrillion]

One thing I didnt hear you mention is what kind of paint you used. Is it an enamel base?. Thanks.

[@DPTubs]

Resurface Solutions out of Texas

[@bennelly4308]

good video. hope you can help me with a question? had tub resurfaced a couple years ago. i used an ardex silicone caulk and within a couple month turned yellow. have been putting the project off because i am scared to remove the caulk, not knowing how careful i have to be to not mess up the resurfaced tub? they gave instructions on cleaning it and a list of approved cleaners. i know i can't use a caulk remover on it because that stuff is harsh, any ideas? thanks.

[@joerut7585]

great work ! what do you use to reetch the non slip etching to the floor of the tub

[@DPTubs]

If the customer wants they have an option for a non skid coating application. I use shark grip

[@jasminemejias1829]

Thanks to your step by step video, I feel so confident with fixing our bathtub now! Thank you! Previous tenant also painted over the white subway bathroom wall tiles. How do you suggest I strip the paint without damaging the tile glaze? Thanks 🙏🏼

[@DPTubs]

The same way

[@tomoleary1367]

Hi. great video. how do you scrape the four inside corners in the tub? they're too concave for blade. Thanks.

[@gcoffey223]

Can you use an orbital sander? What paper woukd you recvomend?

[@Shanegla]

Oh yeah buddy it's a lot of effort how much can you possibly get for a tub?

[@conservativeamber1216]

Great detailed Video

[@brothatay3902]

How to find the scrapper you used? Did you do just one coat of spray,

[@waltervazquez8933]

What exactly brand and type of paint you using, please let me know I'm just waiting to mine but I'm not sure what kind of paint I need

[@smann7761]

Dig the video. I was thinking of reglazing my tub a bisque color. Do u think that will make my place harder to sell later on. ;)

[@DPTubs]

Yes I do! White is most common especially for homes requested by real estate agents

[@chassityc1629]

When he says re-glaze, does he mean it will be as if it were a new tub like the porcelain feeling in stead of the ruff paint feeling. When you re-glaze will it peel ?

[@amyk8488]

If paint remover gets on grout will it ruin it? I have a tub sink and wall to do. The wall is old tile with the grout

[@barbrakilgore7095]

My bath tub is one of those kits and when i first moved in i sprayed it with rustoleim paint to cover scuffed spots it doesn’t allow my shower mats to stick. Do you have a video or instructions on reglazing those bathroom kit bathtubs

[@user-lf7en6rf8m]

Hi can you tell me what product you use to glaze and what setup as far as tools go when spraying

[@mica8506]

Very nice job

[@musaddiquechowdhuryjumel9437]

Which HVLP do you use make a review

[@BambiCole]

Just beautiful. Thanks for sharing. I will be looking forward to your next video until then I am keeping you and your's in my thoughts and prayers please stay safe, take care and God bless!

[@cynthianarine5625]

Hi where do i purchase the brown solution you used for the bathtub? Thanks

[@DPTubs]

you can get from Home depot / BAthworks or shurbond acid etch. If you are a professional you can try Napco

[@qalas7327]

What are you spraying ? Enamel paint...

[@minaking9400]

Awesome work

[@josenca90]

Hey bro!! After you scratched it all with the etchin, did you washed it with water? Or you just wiped it up with paper towels?

[@DPTubs]

Completely rinse with cold water then dry

[@Izzywizzy74]

Can I use just the spray can of Krylon Tub and Tile - I don't have a machine... I also know that there is one with a wider spray top but I cant find that so I just got regular can.

[@shoop4040]

Wow this is great- I am a complete Novice and want to fix my kids Tub. It looks like I may have to rent a few tools like that glaze spray or can I just paint it on ?

[@alejandronavarretevera4629]

Boss quick question. Do you use a primer before go to epoxy and spray the tub?

[@stroys7061]

Excellent video. Thanks! Do you ever get to Michigan? 😃

[@DPTubs]

Maybe one day!

[@jabixl]

Nice!what is the product you use ?

[@kellyhawthorne3629]

Is this actual paint that is being removed or a refinishing coating? We rent a house and our landlord insisted on her handyman refinishing the tub. I dropped my razor about a week later and a chunk came off, it's a couple years later and it's like a third gone. I tried to take an actual bath once and came out with bits of it stuck all over me! lol I want to take it off.

[@mreightytwenty8709]

Great job mate...What did you charge for this job. Thanks from NZ

[@ChateraJohnsonWIRealtor]

Great work! Any advice on how to remove your stains from an old cast iron tub?

[@DPTubs]

Try water and 800 grit wet dry sand paper...if that doesn’t work try a little lacquer thinner and sand paper to see if that works.

[@ChateraJohnsonWIRealtor]

@@DPTubs i will try that, thank you!

[@stevenocchionero5262]

great veidos however normal homeowners can not buy the napco products what can we use to etch cast iron/ thank you porcelain

[@DPTubs]

Normal homeowners can look at Home Depot and order Bathworks etching solution

[@Godscreatures1983]

What paint to use for bath tubs

[@nunocorvelo1875]

what type of paint you use to paint the tub?i have a tub that seems have been painted before should apply something before the paint or is ok to just use the paint?i just dont know what type of paint to you

[@DPTubs]

Krylon Tub and Tile...however..follow the steps I show in the video and strip off the old coating first.

[@adilsonbatista9450]

Awesome job man👍🏾 what tip size did you use on your Maxum II gun?

[@DPTubs]

3

[@shaoyancheng8024]

I have some scratches on my new tub after remodeling. How can I get them off? Thank you 😊

[@brittanyjanowski]

Hello! What paint are you using?

[@weslymontague590]

Great video! I have two questions. There is a terrible coat of the rustoleum tub two part refinish on a fiberglass tub and surround. Will the Jasco spray work on this? And or what would you recommend. The existing location is still slightly soft.

[@DPTubs]

I recommend 120 grit sand paper with and orbital sander to remove and loose areas and feather edges. Patch with bondo where needed and then spray a primer coat.

[@weslymontague590]

Thx, I think you talk abt recommended primer but would you mind refreshing my memory. Also, are you still using the krylon kit?

[@DPTubs]

I am using the Resurface Solutions. Krylon is great but they have limited supply and is not always available. It can yellow a bit over time I have noticed when used with hot water within a week after application.

[@sammaden1053]

I am a DIY guy. I do not have access to all the acid which you guy have. I am thinking of buying muriatic acid for acid wash my bathtub. My tub was reglazed 6yrs back and I have removed the old paint. Should I buy muriatic acid? Or are there other product (Zep, etc.) which are equally effective?

[@DPTubs]

If yiu use jurisdiction acid you have to be very careful with ventilation, hand and eye protection and make sure to dilute it with water as well

[@sammaden1053]

@@DPTubs Thank you sir for the reply. Yes, I have bought industrial level gloves, masks and eyewear. Plus, my bathroom has big window. Hopefully I get etching with muriatic acid for the paint to stick. I am gonna prime it with 2 coats (zinsser 123) like what you suggest. And then top coat RustOleum Gloss Enamel.

[@p3patel]

Just want to clarify - what you put in the Capspray is the Kyrlon Tub and tile 2, right? Thanks so much for the products and the video. Amazing transformation

[@DPTubs]

Yes for DIY users I would recommend Krylon Tub and Tile...for professional Resurface Solutions

[@dkm1883]

@@DPTubs where to purchase the professional resurface solutions?

[@kristenreckert3704]

Do you use a tac cloth to prevent dust particles from getting in the finish?

[@MrBlackrican26]

What cleaning supplies and brusg would you recommend to prevent this from happening again??

[@BAT-man...]

Great video! What kind of primer and epoxy paint did you use, for someone that has a paintgun? Also how long did you wait between coats?

[@DPTubs]

I wait 10 minutes between first and second. 12 minutes between second and third

[@にもこ]

Thank you, DP. It is a professional job. Question, When do you remove the protective tape from the drain hall? After completely dry, or right after spraying finished? And how?

[@DPTubs]

I donut right after but you could also remove it after it dries to be safe not to touch anything when wet. Poke a hole in the middle and then peel off from the center out.

[@Izzywizzy74]

@@DPTubs So you do remove it right after ?? or you wait until it is dry??

[@yongshi2278]

Hello DP, I am wondering what product you sprayed as the finish. Thx.

[@newlooktubrestoration4431]

Definitely loving the series!

[@DPTubs]

Thanks man...I have some fun video ideas coming up.

[@debrapearse5116]

WOW! Beautiful Job 👍🏽🇨🇦

[@elivial5525]

Is there a top coat to use to make it so shiny

[@alejandronavarretevera4629]

Hey man great work!!! Quick question. If the tub has been refinished before is it always necessary to use the paint and epoxy remover and scratch everything off?

[@DPTubs]

It’s recommended because you don’t know how they prepped the surface. If you can test it and feel comfortable with how it’s adhered to the original surface then that’s up to you. If there is no chipping, flaking, or peeling...then you can sand slightly with 400 grit and spray a primer sealer over the old coating and then spray your top coat.

[@micahandjoflo86]

How much do you charge for the stripping of paint? Then how much for the whole job?

[@corydinell8327]

Hey DP, what filter are you using in the half-mask your wearing? Do you ever use an assisted air machine when spraying or just the 3M filter mask? Thanks for putting out these great videos!

[@DPTubs]

Cory Dinell I have an 8” diameter fume extractor and hose that I use. I will show a video of it. Helps with overspray, VOCs, and primer dry times / moisture

[@jameltaylor6110]

Love your Videos! Can you tell me what size tip you are using with your gun (Capsrpay HVLP Maxum II)? Is it the stock tip that comes with the gun?

[@DPTubs]

Yes a #3

[@aluramcelvain2658]

Unfortunately you have to have a certified refinishing business to order Napco etching compound from the company. Unless you know another way to get it?

[@DPTubs]

@@aluramcelvain2658 you can get Bathworks Etch through Home Depot

[@seywhat226]

My landlord did this to my tub How long does it last? What products should I use to clean it? Is it safe for a child to take a bath in a refinished tub? Great work!

[@DPTubs]

Yes if the proper material is used

[@amyk8488]

Can you do video how to clean your paint sprayer. Please?

[@DPTubs]

I will very soon

[@ThePreciouseleby]

Great Job

[@eastcoastgaming8652]

Looks really good

[@amywestbeld9968]

Enjoyed watching this!

[@drooskeedoo3388]

We have a lot of rust around the drain. I can chip little pieces out. Is there anyway to fix that issue or is the tub gone? I was told by a realtor that it would just need refinishing. This looks like it might be more involved or is it no big deal? Thanks

[@DPTubs]

You can fix it

[@karmen624]

Love this video. Amaze job Danny.

[@ryanheff4761]

Looks amazing, what's the model of the sprayer that you're using if you don't mind me asking?

[@DPTubs]

Capspray Maxim II and Titan 75 Compressor

[@MsAri89]

I’m about to do my tub after watching this but what spray to do I use for the glaze you did at the end? Is there another way to apply it?

[@creativemario101]

Roll it😂

[@jenncooper8467]

Do you have advice if the bathtub was like a plastic material I don't know what you would call it. And has had a hole developed in the bottom of the tub it's been fiberglassed but now the fiberglass has come off? Can't afford a new one.

[@DPTubs]

Yes I have a couple videos on fiberglass crack repairs just search “fiberglass repair DP tubs”

[@kingsleykwon4572]

Well done

[@ereed442]

Wow amazing work

[@DPTubs]

Thank you!

[@martinherrera3172]

Nice❤ How much did you charge for that Job?