Drag Racing the Hellcat Challenger to shake it down. Anything could happen.

[@alexelrod242]

Rob- goes dark for 3 weeks, drops a movie, then a couple days later a 16 minute minisode

[@treewisemenllc7281]

Sometimes it be like that.

[@alexelrod242]

@treewisemenllc7281 we don't come here for robs consistency

[@williamedward3198]

That’s what focusing on creating great projects and great content vs some goonsquad type lift kit and wheels calling it built with daily uploads. Go ROB!

[@treewisemenllc7281]

Consistent.. not exactly. However, the content and endeavors he shared with us is what we're here for!

[@theephantomstranger]

If only some of yall could see the attention to detail and appreciate it, no matter how short the video. They pack alot of little details you seem to miss.

[@KHALABEEB]

Rob -I have a 12 rotor built... also Rob- hold up, gotta build my girl her dream car this week

[@Patriotic_Eagle1995]

also Rob- Here's 8 minutes of me trying to sell a house and low-key trashing my own brother and mom on KZbin

[@Casper_and_Red_Betty]

It’s the randomness for me with uploads lmao

[@jiujitsumonkey1]

That might be the closest thing to an outro I've ever seen Rob do in a video, it didn't just randomly end

[@mikeb5352]

Haha I love the random endings 😅

[@tehmorbias]

I'm not used to not being blue balled, it feels wrong

[@karlp1534]

Everyone was cleaning their car and Rob was there building a car. 😂 what a legend

[@jkaa034]

Lol exactly what I was thinking! Epic...

[@Not_Ferrari]

Isaiah deburring the intercooler pipes on the pavement is genius 😆

[@YusssoM]

First ever pass as a shake down and full sending it is crazy 😂 reminding me of 4 rotor 4 wheel burnout on hoonigan, good times.

[@EricFixalot]

Rob to get that car to launch you'll want to get rid of the squat in the rear suspension, you want the suspension to push the tire up against the track. You'll notice the rear end of most successful drag cars will actually lift into the air. Fox body guys often change their rear control arm geometry to help that, but I think based on the wheel hop you're getting that it's a shock tuning issue. QA1 talks about how it's recommended for drag racing to increase the shock compression to keep the tire from coming back towards the car and to soften the rebound to let the tire go towards the ground. A better rear sway bar is probably also needed to fix the crooked launches.

[@helplmchoking]

Also absolutely need to stiffen up that roll bar, thing leans over like a yacht at full keel lol it's all a learning process, though, takes a long time to get a drag car dialled in - especially when it's not the kind of car you're so familiar with

[@EricFixalot]

@@helplmchoking I totally agree with you. I'm just trying to point him generally in the right direction, I don't expect it to be perfect instantly.

[@helplmchoking]

@@EricFixalot oh yeah I wasn't trying to sound sarcastic, I totally agree with you. Gonna be cool to watch them figure it out for sure

[@smythiegato]

By the looks of it they could have dropped quite a bit of pressure out of those rear tyres too.

[@24kNick]

lol i bet rob thought he could just send it and that drag cars are easy to setup

[@ItsHazrD]

Been here since the 4 rotor was a dream! Love the progress! Only greatness from Daddy Dahm!

[@RadDadisRad]

You missed the 3 rotor build up.

[@madmod]

I been asking for Lincoln content since before this was a Rotary channel.

[@eriklarson9137]

I joined just before all of you guys. I am better.

[@xploration1437]

@@eriklarson9137is your boyfriend impressed? Nobody else cares

[@RadDadisRad]

@@eriklarson9137 oh yeah my KZbin account has started puberty. Yours is still in elementary school!

[@learnmyname123]

12:12 'His & Hers' goals

[@robboss1839]

Yeah, that’s such a sweet combo of cars

[@theephantomstranger]

Been watching for awhile. I love how dedicated your team is to keep manual tools around to make custom parts on the go too keep the original details of standards up to expectations. Those little details mean a lot overall. Edit... watching this shows how much more he puts into content than his personal gain. He does make it about him but only what what interests the viewer and not just him.

[@jamesexploringonline872]

Absolutely full credit to the team that made this all come together. That's one mean machine. Thanks for showing it off all through the steps.

[@streddaz]

In this episode of Rob Dham, Rob throws his brother under the bus. 😂

[@acurarl9929]

Did a rotary guy just say someone’s vehicle sounds obnoxiously loud ?😂😂😂😂😂😂😂hilarious

[@violentpwn]

Yeah but it's acceptable and proper when it s rotary....everything is is just wrong...

[@emenesu]

You can't possibly dislike the metallic sound of a rotary. And don't you dare compare it to the trashy sound of a cut v8 exhaust.

[@TheAsdffaaa]

@@emenesu ever seen blower pro modified cars live?

[@wobblysauce]

The turbo muffler

[@JakubJaworski-k9w]

Don't forget that Rob always puts muffled exhausts on his cars, the 3rotor has 3 or 4 mufflers I think

[@Clay_kn4nil]

Space that starter man. That flywheel ping is awful. Other that that it's amazing!

[@gamemeister27]

Is that the ka-ching sound when he starts it up? I kinda love it lmao

[@stefeninspringfield]

going to need many hours and test runs to tune that suspension. The rear had 0 squat and the front didn't do anything to help throw the weight on the rear tires but hey you made it.

[@guy990]

That house update was so refreshing you never broke that wall down and I've been watching since big brother days

[@RadDadisRad]

That 71 Challenger next to the 3 rotor FD is amazing.

[@jordanlee2081]

Love the bush mechanics in the car park, amazing what can be done when it needs to be done

[@jonathanallen9205]

New car. Rob seems like you have found your other half, hust saying. Congrats on the first piston build. Car looks awesome. Should have aired tge back tires down to like 12 psi for the races.

[@ogKEGGY]

This is the most inconsistent channel on KZbin lol. I love it.

[@azpaquin]

Very well done. Love the way you keep it humble and real.

[@brianchen902]

Isaiah cheesing at the camera at 12:11 makes me smile lol

[@raviolibandit8396]

The way the starter sounds like a sword scraping across rocks has been getting me ugh 😅😂

[@samuelpaquin7160]

Every chrysler i saw had a horrible starter sound lol like a signature

[@xploration1437]

It’s the flywheel

[@crisnmaryfam7344]

@@samuelpaquin7160 no dude. Ive been a mechanic for decades and worked on many a mopar, This is not signature or even common, its a bad noise from a janky interaction between the flywheel and the starter most likely. It could also possibly be an issue in the clutch, given the massive stack of clutchs they installed.

[@crisnmaryfam7344]

2:00 Definitely sounds like the starter isnt disengaging far enough before the flywheel gets spinning. Ill bet the teeth are getting mangled. PITA to have to pull the trans and engine apart again for something they overlooked in the rush.

[@ThatV12MiataBruh]

05:48 Precision engineering at its finest 😂

[@aproper323]

Last minute repairs, Gosh, I love Rob and the team.

[@AngieMeadKing]

Congratulations for still being able to launch it hard!

[@grantbuxton]

Wow that's crazy next to those barriers

[@OlofJansson755]

5.45 is why i love Rob Dahm

[@robboss1839]

That challenger and 3 rotor are such a sick pair. Modernized classic and a JDM legend of a race car

[@hahaha12345678993]

just finished watching the 90 minute video, what perfect timing for this one

[@ethanwild3301]

Wow! What makes that sword sound, the starter, the flywheel, the clutch?

[@sigvision4189]

Awesome to hear you are coming to Bowling Green for the Moparty. I live in BG and it is awesome to see all the cars come into town from all the events we have. Love this car

[@802Garage]

Car looks and sounds absolutely amazing. As for the house, bro that ain't even that bad. You should see my house in comparison. 😂

[@shaneschlievert5492]

Your boys get down like I do!! You guys finishing the car there at the track is the true spirit of racing!! At least it is to me. Either way, I love it!!

[@SloppyMechanics]

7:12 Unabomber tuner

[@SpookySpecter392]

Bro, 100% support all the way!

[@spdcrzy]

I KNEW I used to see (well, HEAR) your FC RX7 back in the day in Michigan! Big ups from someone who remembers those days like 15 years ago lol.

[@lukebrennan5780]

Parking lot car works! I haven't done that since the 70s. YOU GUYS ARE AWESOME!!!!! Erica Schrull - we need WAY more of you.

[@Angryeddie14]

Lovely build and a great team effort

[@karld34]

The car sounds good.Erica good job.

[@lns5028]

Awesome guys. Lots of fun on those slicks. Your new wrench looks like Kenny Powers

[@houndbot]

I just got done with the last video, this is a treat

[@MrMorepower71]

Great video that shows the real side of all that craziness.

[@eryczakpl2337]

Seeing you guys transfer from building the car in a garage to building it in the parking lot was hilarious, you nailed the build

[@jameshatton4211]

Rob you have 1 more thing to add to your to-do list? And you must film it so we all see it; we want to see Erica's dad's response to the car seeming he was there on day 0

[@calebmacgray4588]

Dude that thing took off like a shot holy crap hahaha well done all around team effort

[@blaze_devil]

Hay throtl guy 2:28 🔥🔥

[@WildDigger]

Rob, you and your team built an awesome car! Doing a hellcat swap to an old school challenger has always been an idea of mine. Way to go.

[@crisnmaryfam7344]

You and every Mopar fan since the hellcat was leaked.

[@theslader]

I cant wait to see more work on this beast !

[@mixolydiano8954]

This is exactly what I need to wind down.

[@robertteel4316]

Sweet! Great team, nice work. Lots to be thankful for.

[@nibbsie7875]

Awesome, we need more Erica, definately makes Rob a better person!

[@ณรงค์จันทสิทธิ์-บ9ฑ]

Thank you❤

[@kevincase2141]

Kentucky!!! Let’s go!! See you there!

[@cncdan1364]

2:24 her face when he says they other sound like shit is classic. She like babe don’t be mean

[@spencerhudzenko3734]

Love to see that blue walled garage again. Makes me feel like we should be listening about a messed up Rx7 body pane fued.

[@greengabe5]

I love the MOPAR content along with the Rotary stuff😍

[@alanmunroe8332]

Small tires out back & big power up front, needs more UP on front shocks, rotate the weight! Get it right: you gotta wheelie or a whiplash, when IT LAUNCHES.😊

[@DViper0020]

I was talking with Kevin, trying to figure out a way to make it to Roadkill to see this in action, but I unfortunately just got back from the UP and couldn't make time to get up there. I don't know how long you guys are home, but if you are still around, I'd love to come check out that beast! (This is your old employee from EAC, Doug btw.)

[@thylacine123]

Its incredible to see you guys power through this insanity of a month. From the shop to the lot those brains are working 100% to bring everything together at this pace. Take care of your boys!

[@O3WZ]

that's a mean looking machine. Congrats on the hard work... and also, lets see what the team has going on for project cars!

[@marktilley388]

starter needs shimmed

[@sberry80]

Love the challenger. What's up with the starter?

[@ryanmorgan5677]

Definitely going to need some serious suspension tuning to get that thing to hook

[@KHALABEEB]

I wish I was anywhere near Michigan. Thats such a nice home "somebody" destroyed...but all of that is easy work

[@stevenyemc]

I have never been into muscle cars in my being from the U of the K. But I have a mahoosive hole in my life now that needs something like that to fill it. Bloody good work fellas and fine lady! Love that you have gone down the supercharger route. Turbos are cool but superchargers drive so much better!

[@PinkAndOrangeAndGold]

Cool to see she is so into it

[@bmxriderforlife1234]

You sir are a legend for this. I was gonna do the same thing or go with the viper v10 for someone and the hilarity of it.

[@leavenothingstock]

Dodge is really smart for doing this- it gets so many of us, who would never watch dodge content, involved and rooting for it!

[@Xempt_One]

Wow, tried to use your ag1 link to try it out thinking id be supporting you as well as local, im from new zealand. Turns out they dont even ship to new zealand even though its made here.

[@jm71681]

I apologize for the noob question, but what's with the "ringing" sound every time they start it? It sounds like a bell when it starts 😅

[@Mikipedia]

What model is that Dodge at 1:03 ? That looks really nice.

[@snakezdewiggle6084]

Seriously ! AC in a Classic Muscle Car ! Totally Stunning Car, great job guys n' girls.

[@dongordon2754]

Thanks

[@KyanCruze]

Wheres the 12 rotor u just left us hanging

[@JimP419]

Trap house? In Frenchmans bend lol. Nice to see u back in monroe for a visit.

[@sweettee3647]

Not fair. Throttle used the same car as last year. It's been tested over and over. Good job guys !!

[@ronstoppable9547]

Its a rocket. Itll do well when finished

[@dubiousf00d]

That look back was the ultimate gesture of approval.

[@Nikkoz33]

That starter sound is beautiful

[@noob5000000]

Man, I live like 20 minutes from Pontiac and always manage to hear about Roadkill Nights after it happens. I'll set a reminder for the next one.

[@onelife2live4]

Dang what is that metal on metal sound at start up the fly wheel flexing or does the starter need to be shimmed. Awesome build but that's driving me insane

[@extec101]

i do like the classic yellow black paint theme of the car, it look used rowdy and the paint tell a storry about the cars adventure.

[@kittycitykevin]

How many houses have a pool you can bass fish in?

[@Avatar711Wizard]

Top class as usual Rob. And can I give a shout out to Camera Guy. Wow he's good. I mean wholevproduction/editing is top Notch. But Camera Guy, you rock dude.

[@ZexyContender]

Rob! There's a SUPER nice Mazda Formula for sale on marketplace in Jasper, Indiana!

[@calebyrd253]

Rob, i never knew how close i was to you, I’ve been watching for a solid 5 years and you’ve said Michigan but damn, I’m in Monroe every weekend

[@riddlemethis01]

I kinda feel like a proud papa watching rob graduate to a real piston engine, the Dorito engine is definitely a vibe but a V8 in a 71 challenger just screams good old muscle car and when Erica was driving down the street @ 12:02 and gassed it the front left of the vehicle lifted was awesome. Congratulations on an awesome build so far

[@Fa5Squad]

Good shit guys ❤

[@MrFelonystreet]

if someone told me a few years you were gonna be on roadkill someday I’d say they were smoking crack. Love to see it.

[@k1wi_steve]

Dahdy ❤

[@pgmurray76]

Kapton tape...nice!

[@inqufox1750]

Damn that driveway really be lookin like Fast and furious X3

[@pgmurray76]

This video is already badass!

[@grisbeer3354]

And the dyno?

[@jeffreytipper4909]

Nice Challenger good job //// I owned a 1971 Challenger RT big block car exact same colour and a 1972 AAR tribute CUDA and a 1969 Barracuda .Both my Dad my brother and I were into MOPARS , 4 BARRACUDAS 2 DUSTERS 1 1972 big block Charger SE , 71 Challenger 383 ,and a D stock dart clone with HEMI hood , ,My cousin bought my Grampas 1964 413 Dodge,,I MISS those days and dollar a gallon and cheap insurance///// can you show more of the house, as I may be interested,,,, thanks

[@MrProzakc]

When are you gonna put out the next 12 rotor video Rob?

[@ethanlollie]

9:23 some much torque it twisted the chassis - dom toretto

[@patrickbruhn3483]

Fire Dancer, Nice

[@maxfastest]

Should have put a narrowed rear in with 14 wide tires for some grip !