Drill for Handles & Knobs in Seconds With This Drawer Front Drilling Machine

Self Centering Fences on this machine drills drawer fronts, drawer boxes and doors for handles and knobs in just seconds! No need for clunky jigs to drill for handles, no tools are required to accurately drill fronts and drawer boxes for handles and knobs. Dual drills accurately drill a single hole for a knob or 2 holes for a handle in seconds. Hardware spacing from 3”/ 75mm to 13.75”/ 350mm.
The SC 350 allows you to accurately drill drawer fronts, drawer boxes and doors for hardware in just seconds!
I need to adjust jigs, mark out fronts or do math to figure out handle placement.
It features a unique, self centering fence system that centers the front perfectly every time for drilling of knob or handle holes. Allows for centered placement of handles or knobs on fronts as small as 5”x5” to as large as 36” x 15”.
The drills are easily adjustable with a front mounted adjustment wheel with a digital metric indicator for center to center spacing as small as 2 1/2”/ 65mm to as big as 13 3/4” / 350mm.
Fence and stops are easily fixed for fronts that need hardware placed at fixed positions such as doors or drawer fronts with multiple handles.
Requires no tools or tape measures for regular set ups and adjustments.
No power needed! Drills are air operated and requires only a standard air hose for operation. On board air tank ensures air drills have sufficient volume of air to operate smoothly.
Air drills operate independently to allow for handle or knob placement.
Safety is ensured with 2 hand operation.
Drill button console is movable, allowing for operation of drills when drilling oversized panels.
Hold down features a removable/ replaceable backstop that reduces blowout, while protecting the operator.
Machine comes standard with base on 4” caster wheels with 2 locking wheels so it can be easily moved anywhere in shop.
Side tables for placing fronts on create a U-shaped work cell for efficient handling of parts during processing. Table fold down to save space when not in use.

[@TheMitchellShields]

Absolutely incredible 👌 and Lean

[@derrekholland5207]

Thanks

[@gustavorubiov]

you blew my mind

[@derrekholland5207]

This was the prototype. We made about 100 improvements and the production model will be amazing!

[@TheOmar1389]

thanks

[@derrekholland5207]

No problem

[@Yellowstone-cabinetman]

That’s sweet

[@derrekholland5207]

Thanks, it’s a great machine and a huge time saver

[@Advancedtechnical]

silly question, why do you need to press 2 buttons vs just one?

[@davelelonek5598]

That is a safety standard in the US. Two hand touch.

[@derrekholland5207]

1 button for each drill motor. Most of the time you use both, but for knobs you will use a single motor. The production model will be 2 handed operation for osha compliance

[@yankafir]

Can you pre-order this?

[@derrekholland5207]

Yes. Shoot me an email with your contact info and I can get you on the list

[@derrekholland5207]

[e-mail]