I bought one. The system works much better than standard auger. Thanks!!!
@brettmuster72976 жыл бұрын
hi did you uy the bailer as well?
@yousuckathomerepair73013 жыл бұрын
How deep did you go
@cinepost4 жыл бұрын
We need more videos of this
@Pavement-Prophets4 жыл бұрын
I’m all for easy, if a bright spark can make reduce the workload and give me less blisters I’m into it. Great idea guys, I’m seriously considering it 👍🏻
@drillpartner3653 жыл бұрын
Thanks!
@gavinhodge2290Ай бұрын
Got one, went 16 feet in carolina clay soil...the joints do wobble a lot, no matter how well you tigten the bolts, when that happens the auger catches at those junctions and makes it allmost impossible to pull it up without with using a back and forth motion to get it up over thise junction points, so as you use that up and down rope play, you will loose a lot of material back down in the hole....someone mentioned smoothing out thise junction points wih an angle grinder, that would probaly work....but it is a very wobbly set-up as it gets at 15 feet and beyond....migt be better off to spend the money on buildig your own system like they use in south america, with a tire as the cable/rope spool and the cutting bit made from pipe...its know as he cable tool method...less strenuous too!
@coachdnicholson8 ай бұрын
I bought one a couple years ago and I’ve yet to accomplish anything with it. Great concept, but as you add sections, the joints loosen up and no matter how much I try to tighten them without snapping bolts, it still shifts and creates a lip that the spiral catches on and it’s virtually impossible to pull up. Wish there was a better way to get a well installed. They claim 30 feet in an hour but I barely got 8-9 in about 3 hours. Going to go back to just a plain-Jane Seymour auger.
@turtleschmiechen61556 ай бұрын
I was able to deal with the 'lip' by smoothing it with a angle grinder at the joints.
@EvermontKing3 жыл бұрын
Ok so I want to be able to drill a 4 in hole in sandy Florida soil. The casing I'll be 4 inch pipe. Will this bit fit into a 4 inch casing? Please give me the proper link or model to order.
@dennisd29112 жыл бұрын
Can you attach a cable instead of a rope?
@se7ensnakes3 жыл бұрын
How do you prevent the well walls from collapsing and trapping the unit in the well?
@yousuckathomerepair73013 жыл бұрын
This is an excellent question. I bought one it's on the way. I'm going to try and be gentle and hope for the best.
@jorgeluism.v.98562 жыл бұрын
You must use a solution of water + sodic bentonite and pump in the hole. You must use a pump and do recirculation. The viscosity up and the mud out of hole with the solution, the mud is removed after that it sediment and the solution of water+ sodic bentonite is pumped new. The solution water+sodic bentonite avoid that the sand collapse too. This is the Best option when You dig in the sand ground.
@bat197 Жыл бұрын
You put in a well casing to support the walls, especially in a sand rich environment.
@southbridgeforestHOA Жыл бұрын
@@bat197 but the well housing needs to be the same size as the hole and in this case the auger would no longer fit down the hole!
@se7ensnakes Жыл бұрын
@@jorgeluism.v.9856 I tried looking to purchase Sodic-bentonite in hardware stores. No one has it.
@DelpieroBlues2 жыл бұрын
Dove posso acquistare la trivella? In Italia... Grazie
@kemalcatkkelekcioglu95974 жыл бұрын
hello, where can you buy the red hand screw drill set.i need the red drill set.
@cinepost4 жыл бұрын
These are for sale on EBay
@drillpartner3653 жыл бұрын
our webstore drill-partner.com. You can change language to German of English
@cinepost4 жыл бұрын
How would this work in sandy soil near the coast?
@drillpartner3653 жыл бұрын
yes, you should use casing pipe to prevent hole from collapsing
@se7ensnakes4 жыл бұрын
how deep can you go with this system?
@drillpartner3653 жыл бұрын
depending on lithology. Max 20-25m
@se7ensnakes3 жыл бұрын
@@drillpartner365 I was thinking of sending the casing down with the drill bit but the inside diameter would not allow me to retrieve the drill. Is there a collapsible drill bit?
@yousuckathomerepair73013 жыл бұрын
I bought this thing and I'm trying to drill in some Florida clay and it goes down easy but you will need some muscle to get it out. I've never tried any other way so I couldn't tell you how it compares but if you are using this thing in clay do not get ahead of yourself and get it so stuck you can't pull it up. Also the clay sticks to it and it's hard to clean of as you go. Bear in mind that sand will be easier but it collapses easy and you can get stuck so bad you lose your rig. I think having two different auger heads is the way to go for certain applications. I'll be making a full review.
@southbridgeforestHOA Жыл бұрын
did you ever make a review. I want to use in in red carolina claywhich is also very sticky. do you think if one mounted a 12v winch on top that would help retrieving the auger bit? how deep have you dug with it please?
@yousuckathomerepair7301 Жыл бұрын
@@southbridgeforestHOA forget it
@EvermontKing3 жыл бұрын
I ordered this I'll let y'all know how it goes
@dennisd29112 жыл бұрын
So how did it go?
@EvermontKing2 жыл бұрын
@@dennisd2911 I gave up at 9 feet lol I'm such a lazy POS hahahaha. Clay sucks with this man. I hit a patch and it's super hard to get up.
@southbridgeforestHOA Жыл бұрын
@@EvermontKing I have red carolina clay, so even with a winch it would not work? seems like a 12v winch and a harbor freight pipe threader each about $100 would easily automate this. all one needs is a 12v truck inverter to run them.
@milleniumann28 Жыл бұрын
@@southbridgeforestHOAany updates? Did you get it down?
@renedersachse29256 жыл бұрын
Hallo.Kann man zusätzlich Stangen kaufen? Ich müsste 15 m bohren.
@drillpartner3656 жыл бұрын
ja sicher. Meine E-Mail drillpartner@europe.com
@ramperkamper4 жыл бұрын
moin ich habe mir auch ein systembestellt es soll diese woche kommen bin gespannt und es gibt verschiedene längen im eby shop
@renedersachse29254 жыл бұрын
@@ramperkamper viel Erfolg ,8 Meter hab ich spielend geschafft
@amjadkarimi21742 жыл бұрын
kann in internt kaufen
@chrismylonas7646 жыл бұрын
The email address you gave me doesn't work. Is it correct?.
@drillpartner3656 жыл бұрын
yes, its correct. drillpartner@europe.com try to send message through eBay - drill_partner www.ebay.com/usr/drill_partner