Got some holes to drill but this video starts outside on a morning walk with Sullivan the shop dog.
Пікірлер: 54
@CK-mf6du
Lol fun fact, I said oh my gosh a split second before you when that piece dropped lol. Great minds think alike 😂. And thank you for the information BTW! I'm researching this for a stockish/mild built 400. Not a fan of the 1.72" intake valves stock, planning on different heads.
@wheels21992 жыл бұрын
I just found your channel and I’m glad I did. Your shop is awesome and very well equipped, and the most important thing in the shop is the dog. You have exactly what I am in the process of building, a fully equipped shop. I want to be able to handle anything that comes through the door, that is my goal. Now add the puppy into it and it doesn’t get any better than that. Great video and give that little guy a belly rub from me!! Eddie wheels 😬🧑🏻🦽👍 From NJ.
@bcbloc022 жыл бұрын
I am suspicious that isn't the first time that level has been in the floor! lol Glad your shop supervisor is feeling better! Old Baily feeling rough after a head over heels trip down the stairs the other day. Poor old feller.
@kooldoozer2 жыл бұрын
I dig that air float table. Never seen that before. Now I want one LOL ! ! !
@josephfine33942 жыл бұрын
Never knew the one row was angled. Nice tutorial, good clean job. Best part of the video is Sully! What a good boy!!
@dgc9402 жыл бұрын
So Ive ran them here in Extremely HOT Texas with and without drilling them with zero issues? The new dart 400 block also dont have them and its Siamese cylinder's too? Thats on iron heads. Looks like the aluminum heads would work better anyway at getting rid of the heat?
@otisbailey5455 Жыл бұрын
Thanks for the tutorial.
@tkovac4912 Жыл бұрын
I've wondered why the top row is necessary. The bottom makes sense since the bores are siamesed and air can definitely get trapped under there as the water jacket is filled. But wouldn't the top side fill normally to the top of the block deck just like any other sbc without issue?
@carltauber29392 жыл бұрын
Great to see Sully back in the water, sad to see him riding in the canoe instead of swimming along side. Do those holes in the heads communicate with matching holes into the water jacket of the block?
@TrPrecisionMachining2 жыл бұрын
very good job
@scotts4392 жыл бұрын
Beautiful dog! Hey how are you anchoring the head down at an angle like that? I am trying to figure out some new clamping methods for my S&G machine. could you show the bottom piece?
@bobwilson758
Hand drilled my cyl. Heads 3/16 “. Tits - Never a bit of trouble . 1.94 intake valve
@clemzahrobsky2137
GM racing said if not operated under 3000 RPMS no need for the steam holes
@prevost86862 жыл бұрын
Why are the steam holes on the intake side drilled at angle?
@rayhuggart5214 Жыл бұрын
Good to keep your dog away from metal chips and shavings. A friend of mine lost a dog because it ate a bunch of stell filings. The cutting oil they used had animal fat in it and the dog couldn't resist. Poor thing.
@matsandersen6119 Жыл бұрын
sbc 400" heads already have the holes
@hilltopmachineworks21312 жыл бұрын
My Shepherd and chow like water. My Husky Shepherd mix doesn't. No water source close by so we just fill up a plastic kidde pool.