LOWERING THE C5 CORVETTE (THE BEST WAY) (4K) | DriveHub

LOWERING THE C5 CORVETTE (THE BEST WAY) (4K)
It's time to lower the C5 Corvette! & This is the best way to lower the C5 Corvette!
The C5 Corvette has had an 'altitude' problem and it was time for a change. So in today's video, my friends at Northeast Auto Imports install a VMS Racing lowering kit into the C5 Corvette. The C5 Corvette looks SO MUCH BETTER now that it is lowered!
Check out the C5 lowering kit here: amzn.to/2JAc0cB
www.vmsracing....
Check out Northeast Auto Imports: northeastautoi...
/ northeastautoimports
🗣
► Subscribe To Drive Hub!- bit.ly/33EgfK2
► Follow My Instagram!- bit.ly/3ccpaGq
►Facebook!- bit.ly/3iI8GYV
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🔥WATCH MORE OF MY C5 CORVETTE VIDEOS :
There’s a 50% Chance You Don’t Want (Or Want) This On Your Corvette: bit.ly/2G4tEU1
I Bought a C5 Corvette..Here's Why: bit.ly/3mLLyuY
Here's How Much My C5 Corvette Has Cost Me...So Far: bit.ly/3mHuM08
2019 CORVETTE TECHNOLOGY IN MY 2001 C5 CORVETTE!?: bit.ly/3iSA5Ys
By Far The MOST POWERFUL Headlights For The C5 CORVETTE!: bit.ly/35XwKU9
FINALLY DONE! C5 Corvette SLP Loudmouth Exhaust Install PART 2!: bit.ly/3kHMGOm
Did This Mod Make The Corvette OVERHEAT??: bit.ly/2RRDg6N
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🏎 MY CAR PLAYLISTS :
The Best Of Drive: • DriveHub - The Best Of
C5 Corvette: • DriveHub - C5 Corvette
Just The Noise: • DriveHub - Just The Noise
Car Reviews: • DriveHub - Car Reviews
Corvettes: • Playlist
Installs/How To’s: • Playlist
Imports: • Playlist
JDM: • Playlist
MK6 GTI: • DriveHub - MK6 GTI
Domestic: • Playlist
Supercars/Hypercars: • DriveHub - Supercars &...
Trucks: • Playlist
Camaro: • DriveHub - Camaro
Jeeps/4X4: • DriveHub - Jeep Wrangler
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
👁 NEW HERE?
Welcome to DriveHub! My channel covers anything and everything automotive. Whether that’s installing mods on my Corvettes or other sports cars, or driving rare JDM cars and other amazing vehicles around gorgeous New England.
This channel has developed so much since I created the channel, and I'd like to thank each and every one of you for your continuous support over the years! The DriveHub family is forever growing and I love creating content and fun videos for you to enjoy!
If you're new to DriveHub, expect high octane videos, funny moments, and beautiful cars and locations! We are on this crazy adventure together so don't forget to subscribe for all the latest videos!
See you guys in the next video, Happy Motoring!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Lights on my C5 Corvette; sharplightinno...
Music I use; www.epidemicso...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Corvettes
C5
C5 Corvette
C5 Corvette lowering
Lowering C5 Corvette
Corvette lowering
c5 lowering kit
c5 corvette lowering kit
VMS Racing
Northeast Auto Imports
Muscle Cars
JDM | RHD Imports
Sports Cars
Supercars
Jeeps | Off-Road
Adventure
#C5Corvette #LoweringC5Corvette #CorvetteLowering

[@YellowVette04]

Much better lowered. Glad you finally got the lowering bolts figured out and that looks like a great kit. The solution to any stuck bolt is always fire 🔥 lol

[@james5274]

Ketchup and mayo on steak and cheese is actually pretty good. It's one of those combos you think would be nasty but when you try it you're like oh damn that's pretty good

[@tylerbergeron2059]

Thank you

[@joshthorn4693]

Looks proper now. That really sets off that chin spoiler with it being dropped. Nice job. I’m curious to know how it changed the driving dynamics and if it’s scrapping a lot more.

[@jeffb243]

Wondering the same…

[@nitroceptor1]

Also interested. Looks amazing! How much worse does is scrape after the new ride height?

[@tommymorgan5250]

Hell yes awesome video vette looking amazing

[@mikem4013]

your camera work is HuRtInG bro.. Go take a class already!

[@Addimotive]

Lol having the same problem with mine. It’s definitely in “4x4” mode right now. Going to fix the look with some coilovers soon. Looking good man!

[@Zam___]

great video! just curious on how low you went i must have missed it if you said in the video i see these bolts are good for 2in drop in front and rear? did you lower it 2in on both ends or? thanks

[@Chris.Lewis1456]

Any issues with the front lip causing overheating? I want to put a lip on mine but i see mixed reviews.

[@durkybalboa]

hallo, before replacing the kit, did you have the original chassis?

[@ChadWoodNC-PiedmontSkyCams]

Looks great. Just hope you don't hit a big bump and crack a fender.

[@devonr7497]

Hey man just watched a ton of your videos on lowering the C5... Unfortunately I am in the same boat as you were with the front lowering bolts being seized.. I am trying to find out the best solution, looks like what you guys did was really good (cut off the bottom seals then weld a nut on the bolt and use a breaker bar on it), the only concern I have is the whole inside coming out like it did for you... What did you do to fix it/replace the inside part? or does everything needed come in the VMS kit? Any and all feedback would be HIGHLY appreciated as I want to get this done asap and for as little as possible

[@gregcummings2826]

Man that Vette looks wicked!!!

[@leightonjohnie3133]

Yes

[@CorvetteReport]

Very SICK! Very DOPE! Very COOL!

[@TheOldPCTech]

Personally I don’t do it, but my understanding is that the original, authentic Philly cheesesteak comes with ketchup and mustard. A sandwich shop I used to frequent in Atlanta served them this way... I always ordered mine with no “MorK” (Mustard or Ketchup), add mayo. I did try it once though, and it’s not bad.

[@markfurchtenicht2182]

If you were anything like me you would just enjoy the vette for what it is. It's a beautiful fast car.

[@huskythedoggo]

What Brand is that Front splitter man ? :) looks good

[@leonlawrencez28]

Lower??? Oh wow!! Not worried about scrape on things?

[@ecoron2721]

Great fitment!

[@philv3683]

Next time how about more lighting under the Vet

[@mg_streetkandi]

Good job!!

[@eddieschied7555]

What car was that bright red one? Sorry if i sound dumb im new to cars.

[@milehighmisfits]

Nissan 240sx S14

[@brettbradshaw3704]

Hope the engine swap thing was a joke 😂

[@reginaldsmith8197]

I like your videos I just wish she was more serious On this one

[@tiburciofelipe8680]

Finally!!

[@Gunsforfreedom]

I put ketchup and mayo on a CHEESESTEAK. I never heard of "steak and cheese sub.."

[@williamserver4332]

That's what people from new England call a cheesesteak. Explainscwhy they vote for Bernie sanders

[@Gunsforfreedom]

@@williamserver4332 LMAO

[@Elijah-zn3wk]

Let’s go

[@quentinwhitehead7623]

Ketchup that’s a negative, but mayo yes!..

[@JerryPH]

Cripes, my C5 Z06 is lowered a HALF inch all around from factory and it scrapes *everywhere*, I cannot imagine how much more it would scrape a full inch lower... and I never plan on finding out (and the ONLY reason it is a half inch lower is because the last owner did it, because I sure wouldn't)!

[@Spooky4815]

I thought you were going widebody.

[@bullitt3839]

Enjoy your content but I think you need better lighting

[@stevieanderson7281]

Ketchup and Mayo is horrible on a steak and cheese sub

[@joeg9810]

What's with the porn 'stache?

[@nextlevelmobiledetailingllc]

The camera adds like ten pounds lol 😏

[@That_Guy_Izzy]

Lol “should be easy”

[@rogermurph101]

I don’t really like the lowered look. On anything, really. I’d just keep it stock.

[@JerryPH]

It's so low already... hit a few slightly bigger bumps at speed and then listen to and feel your car pound on the stops. ;)

[@ShellShock794]

It really depends for me. I've seen lowered cars that I like and I've seen lowered cars that I hate. I personally won't lower mine just because it becomes such a pain in the ass to drive anywhere that's not a brand new highway

[@lowery8311]

Luckily for you it's not your car and luckily not everyone shares your "keep it stock" mentality. Imagine how boring car shows would be....

[@BTC_Cassidy]

Monster truck wheel gap is a no go

[@johnwilson668]

Damn son! Find a light! Lol I was cringing watching that kid using an impact gun with a regular extension to put on your wheels. Just a bad accident waiting to happen.

[@Derek2196]

Its a torque stick!

[@johnwilson668]

@@Derek2196 Well, look at that, you can learn something new everyday. I never even knew these thing existed. Lol