Driving your virtual robot!

[@semiuadebayo9626]

One of the best series I ever spent time on on the internet; not just on KZbin. Dont really have the right word to appreciate the effort you've put into this. ...Thank you.

[@physikatom8300]

I've never watched such a great video. Thank you for your effort!

[@upulba]

Loving your videos and I'm eagerly, waiting for the next video in the series

[@ArticulatedRobotics]

Thanks! :D

[@arash.jafari]

I really appreciate you because of such amazing straight forward tutorials. I hope to see some more videos using Cobots like UR5 and adding extra sensors and a camera

[@osamaali4113]

Thank you for your effort. Much appreciated.

[@adarshkaran6611]

you are a legend sir! huge respect!!

[@jsov_uao]

Hi, your lectures are amazing and a great inspiration for me. So, thanks a lot for your work. Please, keep going.

[@ArticulatedRobotics]

Thanks!

[@josha.7364]

I've been following along and everything is working. However, I am running into an issue at 17:50 when you set the fixed frame to odom. The only options popping up for me are "base_link", "caster_wheel", and "chassis". Any help?

[@josha.7364]

Got it working. All I did was run rviz2 first and then launch gazebo after

[@ItsOnly2OfUs]

@@josha.7364 worked for me too, now it doesn't matter which I run first, odom shows up, weird...

[@ArticulatedRobotics]

Hey guys, glad you got that sorted. Yeah I've found that RViz is sometimes a bit strange with that kind of thing. As long as the code broadcasting the odom-base_link transform is running (in this case the differential drive plugin), RViz SHOULD show it in the list. If it doesn't you can try: - Clicking reset in the bottom left hand corner - Just typing it in manually But sometimes it just gets a bit confused. It can also be helpful in these situations to run rqt_tf_tree to verify that the transforms are actually being published (you may need to install that).

[@huyquang5855]

@@josha.7364 I also faced the same problem. Have you solved it yet?

[@chebbiiyeed8548]

Hey my friend im new here , the solution is : Try to include the gazebo_control.xacro inside the the robot model file robot.urdf.xacro

[@deepakramani05]

For a moment I wonder whether two weeks has passed. What a pleasant surprise. Thank you very much for going in detail explaining the whole process. When you cover adding sensors to Gazebo, can you include a short description on how to take any sensor module software available and integrate with Gazebo and interact with it, please?

[@ArticulatedRobotics]

Haha I'm glad to surprise you - don't expect them all to be so fast though! Re the sensors, I'll do what I can but this series will be mostly focusing on what is needed to achieve this particular project, with some extra notes on small things that can be customised or done alternatively. If there are things you feel are missing at the end of it all, let me know and maybe they could be the subject of future videos! :D

[@ThomasBurns]

Thanks so much for making these tutorials! I've been stuck for days on a problem I can't seem to move past: my robot in Gazebo will not move in response to teleop keyboard commands (but will change speed). Instead the robot moves very slowly backwards and to one side (teleop starts with speed 0.5 and turn 1.0). I see in the video that your robot is also drifting slowly-why is this? I've checked and triple checked my code for errors. Running ROS2 Galactic. Any ideas on what I might be missing here?

[@debanjanbarman8335]

I also got the same problem.. anyone please help ? BTW I am using ROS2 Humble

[@saiphanichandrachittaluri1910]

I am also facing same situation

[@saiphanichandrachittaluri1910]

Hi @ThomasBurns, Now I figured the solution. I am currently using ros2 humble for solving this issue I installed the package called sudo apt-get install ros-humble-gazebo-ros2-control it is working for me

[@williamt1083]

@@debanjanbarman8335 Mine didn't work either, but that was because I had forgotten to add the tag for the wheels

[@ManishKumar-mc1so]

hey were u able to resolve the error??

[@iurireis8024]

Really great video, I managed to get it working and having my robot on the simulation, thanks

[@matheusdantas8255]

I really like your videos man! Every time I learn something new. Keep it going!

[@ArticulatedRobotics]

Thanks so much!

[@bofigueiredo]

That is amazing! I really appreciated how did you explain it, so I subscribed right now. Please bring more ROS content like that. About how to simulate a robot in the virtual world before starting to make it. Thanks‼

[@gaegammi]

Your lectures are really helpful to me! I'm soooooooooo appreciated !!:)

[@ArticulatedRobotics]

Thanks so much!

[@nemmjazz]

Thanks for this video. I would love to see more videos on how ros2 work with the real robot in future video. Thanks so much for this. All information need were explained in this video. Thanks

[@ArticulatedRobotics]

Thanks! Yep we will definitely be getting into the real robot in the coming videos. The next couple of videos will be about getting the electronics set up, and after that we will get into motors, lidar, and camera.

[@toniaguilar6992]

Very good job. Thanks

[@ArticulatedRobotics]

Thanks!

[@ruisilva20]

i can't select the fixed frame "odom" in rviz2.... doen'st appear the option

[@messedmushroom]

Hey Josh, awesome video! Where does the "libgazebo_ros_diff_drive.so" come from? Like when we add this to our xacro file, where is it getting the source for this plugin from? Thanks again for a great vid!

[@RamanarayananB]

Hello, I really appreciate the way you presented your video, the concept was absolutely clear. I am actually referring your video for my university project, I followed each and every step carefully. I have an issue with my rviz2 i.e. the /odom topic won't publish at all at the global fixed frame topic. Using the command "ros2 topic list" , the terminal states that /odom is publishing but in the rviz2, It isn't publishing at all. Can you kindly help me with this? Thanks!

[@aeew]

Hmm, the joy node from the joy package? You have my attention...

[@mbulucay]

great tutorial explanation :D

[@ArticulatedRobotics]

Thanks!

[@vesto6864]

Nice Tutorial

[@jameshphelan]

How about an update for Ignition Gazebo Fortress. The commands for Gazebo Classic don't work and I've not been able to find working alternatives (including ChatGPT-4). Thanks! Great tutorial!

[@jonathanr4242]

Thanks for the lessons. It's very helpful. My simulated robot keeps flipping upside down.

[@curtisnewton895]

dude, thank you so much

[@ArticulatedRobotics]

Thanks!

[@antoniomaldonado3155]

Anylne could help me. I've been stuck in this portion of the series for a while. When I run the robo5 in Gazebo, it starts oscillating in, what it looks like the z axis of the caster wheel. I have checked the code multiple times and change parameters for the torque and speed and it is still doing that. Besides that the series is being amazing so far. Thanks for all your work!!

[@adheeshasenanayake7105]

Hello! I am not getting odom as a drop down menu option for fixed frame in Rviz. The terminal running launch shows - .........Publishing odom transforms between [odom] and [base_link] , also - .........[diff_drive]: Publishing wheel transforms between [base_link], [left_wheel_joint] and [right_wheel_joint]. Please help me :( Your tutorials are excellent!!!

[@HarshSomvanshi-x1f]

in this video you are using which gazebo simulation is it Gazebo Garden

[@TesterTester-qq2db]

Is there an adaption for ROS2 Jazzy with Gazebo (maybe GZ Harmonic)?

[@cyka_delik9537]

Gazebo Harmonic is recommended for Ubuntu 24.04/Jazzy....which is where I'm at, too....stuck EDIT: Yah. Launch command is gz sim -v 4 after installing Gazebo Harmonic on Jazzy

[@manigoyal4872]

amazing lectures, started from first and was going well but i have one issue in fixed frame i don't get odom , i am only getting base, caster_wheel, chassis earlier also i had the same issue, but whenever i added the GUI for joint GUI of wheels, all the frames appear, since now i don' have GUI enabled for this i don't have a way to get frames also there is an error on rviz cmd terminal left_wheel passed to cantransform source frame does not exist

[@gyanjyotibrahma7478]

in the URDF file the motors are not defined . So how is the robot able to move in the gazebo? or is it because of the inertia and collision that are added?

[@JEBobrow]

Thank you for creating these videos! I started following your videos along with my hardware, but I thought I would install the latest ROS jazzy along with Gazebo harmonic. Jazzy works fine with your code but Harmonic is completely different. I am not able to make it work even after reading all the Gazebo to ROS tutorials. I am just curious if you have any pointers for me. Should I downgrade to the older Gazebo?

[@annamcfarlane9563]

great video

[@ArticulatedRobotics]

Thanks!

[@GianlucaLeotta]

Excellent quality and very useful video as always. I will appreciate a video dedicated to ros2_control plugin setup.

[@ArticulatedRobotics]

Thanks! I have just finished the first ros2_control video and made it available to patrons yesterday, it will be released some time this week :)

[@flavianonzambi6878]

Thank you

[@____blank____]

I love your videos and watched a bunch of them. I use Mac m1 but Gazebo doesn't support newer macOS versions; plus using Docker on Mac has a very weird network setting which I don't want to spend too much time grunting. Which Ubuntu/Linux machine would you recommend buying as a new dev machine, which has enough RAM to do complex renderings?

[@masdikaaliman6425]

Is that all package used for this video available for ROS Noetic?

[@saiphanichandrachittaluri1910]

I've been stuck for days on a problem I can't seem to move past: my robot in Gazebo will not move in response to teleop keyboard commands (but will change speed). Instead the robot moves very slowly backwards and to one side (teleop starts with speed 0.5 and turn 1.0). I see in the video that your robot is also drifting slowly-why is this? I've checked and triple checked my code for errors. Running ROS2 Humble. Any ideas on what I might be missing here?

[@connor2729]

Where can I find good documentation about plugins because I’m trying with Ackermann robot but all the wheels go to 0 0 0 when the plugin in gazebo starts

[@hasanilterisdincer]

Hello, I really liked your project. Can a project be made to steer towards a color detected through the camera on a car using the foundations of ROS 2 Foxy that you use?

[@lion87563]

I was trying to record ground truth poses of robot in gazebo environment for my work. But in gazebo we cannot have ground truth we can ONLY get odom poses (which has drift). Is this correct?

[@Teremius]

Is there much difference between py and c++? I'm doing a course where c++ is mandatory but your videos are so detailed :(

[@nickamato3021]

I've got no issue running the diff drive in gazebo, but does anyone have advice for a four wheel vehicle? I've been trying to use the skid drive plugin but can't seem to get that to work

[@athulkrishna3606]

robot is moving too slowly when controlling through keyboard ,any solution

[@tv4y785]

Amazing! I love your series. I am trying to use your guild with a similar project. The difference is using an available model (file .STL) When I launch on Rviz2 (command: ros2 launch agv rsp.launch.py), it works well But, when I launch on Gazebo (command: ros2 launch agv launch_sim.launch.py). It also run without errors or warnings. However, the model didn't appear on world. After some test, I find out that problem is about .STL file. Can you help me?

[@vihaanravishankar5189]

my gazebo world doesnt wanna save. the world file exists, as soon as i open it its just blank with the bot. I'm following the exact same steps

[@mehmetalisahin3263]

missing element description [wheel_separation] why am i take this error ? can you help me doctor

[@zeyadtareq4913]

can I use this controller in my robot that has four wheels? and what should I do to update this controller

[@simonjeppesen9484]

Your tutorials are excellent, the production quality is outstanding! Do you have a Patreon or the likes where one can follow you? Thanks.

[@ArticulatedRobotics]

Hi Simon, thanks so much! I do have plans to start a Patreon and possibly a linked Discord (I was thinking about doing it once I got to 1k subs as a personal milestone of "hey, some people actually like this stuff") but nothing is up at the moment. There is also a Facebook and Twitter page, but at the moment I'm just sharing each video there when I post it, nothing too interesting :) Thanks for your interest though, keep your eyes peeled for more content!

[@simonjeppesen9484]

@@ArticulatedRobotics That sounds good. A Discord would be great I would love to join. We are building a quadruped for our master thesis, and are building a simple Gazebo simulation to test our dynamics, your videos have been very helpful. I'll be sure to follow along for any future updates. :)

[@SAMETELMACI]

on my robot just say waiting for service /spawn_entity in 3:!8 can you help me

[@justal787]

Mine too, it happened after I tried to delete the bot in Gazebo and then save it. The system crashed and now it won't spawn in the new entity.

[@SAMETELMACI]

@@justal787 ı think solved the problem is kill gzserver and gzclient on system monitor

[@geekboy6655]

Hi. You've probably heard about the problem with missing odom in Rviz2. In my case it also appeared, but only after the second time I ran the program, the first time it worked properly. I've tried resetting Rviz, I even changed distro to 22.04/Humble and all the time is the same - no odom. Do you have any solution to this?

[@RileyEllis888]

Has anyone solved the problem of the odom frame not existing in rviz? In addition to that i don't have transforms from wheels to my base_footprint (in his example i think this would be base_link)

[@RileyEllis888]

I've got answers (sort of). For my issue with transforms, I restructured my urdf to match the example with the same names and that seemed to do the trick (i must have at it set up incorrectly). As for why these transforms now show up correctly without also running join_state_publisher, i do not know. For the issue with the odom frame, we need to add two extra lines to the plugin in the gazebo_control.xacro. Those are: /cmd_vel /odom. After this addition, you should see the odom frame. Hope this helps somebody!

[@ТанКуонгХюинь]

Hi, love your video. My question is how do we write a program for our robot to move autonomously? Can you make a video about this question?

[@ArticulatedRobotics]

Thanks! And yep, this video is part of a larger playlist kzbin.info/aero/PLunhqkrRNRhYAffV8JDiFOatQXuU-NnxT The project isn't finished yet so you'll have to wait a little while for each one to get released, but eventually it will be navigating autonomously, in simuation and on a real robot.

[@manigoyal4872]

I checked out and found out there is a change of front slash in tf2 but still i can't understand much about it

[@theoldboar6853]

Great vid again! I was able to control the robot using the teleop line but when I tried running rviz2, I couldn't see the odom as a fixed frame option. do you have any suggestions?

[@ArticulatedRobotics]

Thanks! If the Gazebo plugin is running correctly it should be an option. A few things to check: - Rviz sometimes just glitches up and doen't show it so you can try just typing it in - Install and run rqt_tf_tree to check which transforms are being broadcast - Check the output of the Gazebo window for anythin that looks like a plugin failing to start/run

[@theoldboar6853]

@@ArticulatedRobotics . Thanks for the response. So i tried the rqt_tf_tree but it only shows the base_link, chassis, and caster_wheel. I also swapped out my launch files and robot description files for yours but nothing changed. The only way I can even see the wheel frames on rviz is if I use the joint_state_publisher_gui which I think is wrong for this stage Also, when I run the launch file, i get the info line that says publishing transforms for odom and the wheels so it seems like it's getting published but its not being received

[@theoldboar6853]

@@ArticulatedRobotics it’s working now. I’m not sure what changed tho!

[@Adroitbit]

I'm trying to add camera to your gazebo robot. I don't know how It ended up tilting over.

[@ArticulatedRobotics]

Hey! Camera tutorial is coming soon - I've been away the last few weeks and haven't been able to record it. Was hoping for this week but it may be next. The likely problem is that you need to have two links for your camera - camera_link and camera_link_optical. These should be at the same location but with different orientations, the first uses the ROS/Gazebo X-forward convention and the second uses the computer vision Z-forward convention. Example github.com/ros-simulation/gazebo_ros_demos/blob/foxy/rrbot_description/urdf/rrbot.xacro#L162-L197 Then, you should have a tag associated with camera_link that has a camera tag inside it. Inside that will be your tag for it to talk to ROS, and inside THAT should be camera_link_optical so that the correct frame is reported for RViz etc. Hope that helps. Another reference: answers.ros.org/question/232534/gazebo-camera-frame-is-inconsistent-with-rviz-opencv-convention/

[@jeffreyjene]

I have no trouble running Gazebo and the state publisher on their own, but using the launch file never works (RuntimeError Signal event received before subprocess transport available). I've tried everything to fix, including wiping out my workspace and starting over. I've also upgraded, still no go. Anyone have any idea what this issue is? There doesn't seem to be any online fixes that I've found.

[@jeffreyjene]

Ugh, never mind, I copied the wrong version file! Cheers!

[@sebrihamza3775]

thank you for such video it's really help full.But i got only one problem i hope that you can help me to solve it the problem is when i launch the rviz2 i don't get the "tool bar " "file panels help" and i save the first configuration i made and it's the one that appears every time i want to launch the rviz

[@ArticulatedRobotics]

Thanks for watching! To fix the default configuration being saved (which is easy to accidentally do) you can type "rm ~/.rviz2/default.rviz" into a terminal, this deletes the file inside the hidden rviz2 directory in your home directory. As for the tool bar missing, I've had this before but I forget how I fixed it! Some things to check: - Are you running rviz2? Is ROS sourced correctly? - In the "Panels" menu, can you enable tool bar etc or are the options just not there? - Make sure rviz is fully installed (sudo apt install ros-foxy-rviz-common I think) I hope that helps!

[@muhammadinamulhaq5786]

gazebo is not responding to keys i press in teleo_twist_keyboard

[@sathappanpr1271]

did the error is solved ??

[@muhammadinamulhaq5786]

It got solved. I kind of had to force it to connect ros2 run teleop_twist_keyboard teleop_twist_keyboard cmd_vel=bot_vel

[@sjoerdvgerwen]

@@sathappanpr1271 did you fix it ?

[@sathappanpr1271]

@@sjoerdvgerwen Yes bro

[@sjoerdvgerwen]

@@sathappanpr1271 Can you tell me how you fixed it?

[@雷晨光-t7o]

How can I solve this problem? ModuleNotFoundError: No module named 'rclpy._rclpy'

[@雷晨光-t7o]

already solved,thanks!

[@ArticulatedRobotics]

Sorry I didn't get back to you, glad you solved it :)

[@neo564]

Can you recommend some books for us to read about rso2?

[@ArticulatedRobotics]

Unfortunately not! Last time I looked there wasn't much material at all on ROS 2 (which is partly why I started the channel). I'm sure there has been some stuff written since, but I'm not familiar with any of it to make a recommendation, sorry!

[@neo564]

@@ArticulatedRobotics your channel helps me a lot. Thank you so much for that.

[@KevenBrime-xf7rk]

Include lego robot ev3

[@JensOverby]

It seems like this gazebo-thing is just another game engine. Why not just use a standard game engine that is much more capable of graphics. You can make an object have a ROS interface in Unreal (C++), godot and even directly in Blender3d using upbge running Python. I don't get the hype, when it's just a kind of low-end game engine, sorry.

[@ArticulatedRobotics]

That's a great question that I have asked myself! The discussion thread linked below has some really helpful points to answer it, but some of my own: - At my workplace, we use Unity as we were already using it before were aware of ROS and Gazebo - Those game engines are much more flexible and are great IF you already know how to program and use them. If you know nothing and just want to start with robots, the learning curve is steeper - The tooling, physics sims, ROS integration, etc. are all oriented towards robotics. - You say it's a "low-end" game engine, but that's because the things it is missing (e.g. nice graphics) are generally not relevant to simulation robotics interactions discourse.ros.org/t/why-do-we-use-gazebo-instead-of-unreal-or-unity/25890

[@cyka_delik9537]

my controller won't subscribe to /cmd_vel idk what's up

[@Foolsimsimulate]

Why doesn't run the joint_state_publisher_gui joint_state_publisher_gui ? when we run Rviz2 and run ros2 launch articubot_one launch_sim.launch.py ?

[@mahamaneirochapiou4388]

hello, i realy appreciate your help, i still have some issues. when I run Rviz2, i can't see "Odom", "right_wheel" and "left_wheel" in the fixed frame. even tough i write exactly the same code of gazebo_control.xacro, include it in robot_urdf.xacro and did colcon build