Drone Helicopter Hybrid

  Рет қаралды 3,721,875

Tom Stanton

Tom Stanton

Күн бұрын

Пікірлер: 3 200
@PracticalEngineeringChannel
@PracticalEngineeringChannel 4 жыл бұрын
This is crazy. You breezed over the concept so effortlessly, I would almost believe it was easy...
@humblenoob7631
@humblenoob7631 4 жыл бұрын
Practical engineering comments but gets 16 likes? What has happened to KZbin?
@andrewxbg
@andrewxbg 4 жыл бұрын
i completely agree
@jmac1099
@jmac1099 4 жыл бұрын
I think a little more detail (on how) could be put into the build, Hopefully Tom will have a follow up with the code part too.. i can't believe this actually works..
@liamevans309
@liamevans309 4 жыл бұрын
Hey (practical engineering) I watch your channel as well maybe you guys should collaborate.
@srmofoable
@srmofoable 4 жыл бұрын
@@jmac1099 second channel linked in the description
@elijahf111
@elijahf111 4 жыл бұрын
this is honestly the most impressive thing i've seen helicopter related
@adeetard2545
@adeetard2545 4 жыл бұрын
Tareq Alsaadi flying a helicopter isn’t impressive to you?
@Snagglepuss1952
@Snagglepuss1952 4 жыл бұрын
Me too, and yes I am amazed that a helicopter flies but I understand how that works, this is electronic voodoo, and hats of to the the guys who came up with this in the first place albeit less aesthetically pleasing
@maxonmathew4557
@maxonmathew4557 2 жыл бұрын
@@adeetard2545 bro this guy literally made this by himself also stop hating and being negative
@adeetard2545
@adeetard2545 2 жыл бұрын
@@maxonmathew4557 No
@bonob0123
@bonob0123 4 жыл бұрын
this is where you realize Tom is an actual aeronautics engineer not just a kid goofing off in his yard
@die_hertz
@die_hertz 4 жыл бұрын
I think many engineers started as kids goofing in their backyard :)
@mk6315
@mk6315 3 жыл бұрын
When you realize your hobbies/projects contain enough information for a PhD
@rasaecnai
@rasaecnai 3 жыл бұрын
science is goofing off but with data and statistics.
@alexkram
@alexkram 3 жыл бұрын
I don't think the average aeronautics engineer could pull this off. Sheer talent at work here.
@fakename287
@fakename287 3 жыл бұрын
@@alexkram Huh? Why would you think that? Was Tom the absolute top of his class at one of the best universities in the world or something?
@BPSspace
@BPSspace 4 жыл бұрын
Gonna have to pick my jaw up off the floor... Incredible work as always, Tom!
@blendertestguy5728
@blendertestguy5728 4 жыл бұрын
literally was watching the spirit test flight 8 before this video. I am so glad that i have such amazing youtubers in my youtube feed !!!
@greatnate3816
@greatnate3816 4 жыл бұрын
Nice work on that sprint rocket Joe!
@garbageman3992
@garbageman3992 4 жыл бұрын
I was about to go through the comments but then I saw the bps.space logo as the top comment and I was instantly happy. It's always awesome too see an awesome KZbin channel commenting on an other awesome KZbin channel.
@rjrfletcher2355
@rjrfletcher2355 4 жыл бұрын
I so want you two do collab on a project !
@sUASNews
@sUASNews 4 жыл бұрын
Tom, Tom, Tom, Tom only last night I forgot your name on our hangout but mentioned how clever you were and then you drop this. Outstanding work.
@BlameItOnGreg
@BlameItOnGreg 4 жыл бұрын
It’s crazy that these motors can be controlled on such a small time scale with enough precision for this to work.
@IlliniRob1
@IlliniRob1 4 жыл бұрын
It's crazy that brushless motors/motor controllers themselves have enough precision to work. Each motor phase is getting pulsed many times per revolution in a trapezoidal or sinusoidal pattern. Tom "just" needed to overlay an increase and decrease throttle command each revolution phased in the direction of desired cyclic input. Crazy stuff! My first RC plane was a Graupner UHU back in the early 90's. It had basically a DC drill motor activated with an on/off relay switch and NiCad batteries. It might as well have been a brick with cardboard wings when compared with today's marvels!
@1943vermork
@1943vermork 4 жыл бұрын
Brushless motor: Fuck my life, I didn’t sign for that abuse
@TomZimmerlinkat
@TomZimmerlinkat 4 жыл бұрын
Guy builds and refines a never seen before kind of aircraft and brushes it off as a fun weekend project. What an incredible world we live in.
@geriott609
@geriott609 3 жыл бұрын
incredible *time
@adryncharn1910
@adryncharn1910 2 жыл бұрын
Its pretty amazing, but tbh, it does not seem really hard to build.
@nikkiofthevalley
@nikkiofthevalley 2 жыл бұрын
@@adryncharn1910 Hard to build, no, hard to balance and control, yes.
@Asu01
@Asu01 4 жыл бұрын
_Learn how this man eliminates the need of active actuation on his helicopter. Servo manufacturers hate him!_
@neutronenstern.
@neutronenstern. 4 жыл бұрын
but i dont think that this is a efficient way of a helicopter. But very interesting and if it was combined with a capacitor storing the energy of the rotor when its speed should be decreased, then it could be efficient, too.
@Asu01
@Asu01 4 жыл бұрын
The ESC achieved rapid slow down by applying regenerative braking, @@neutronenstern.. This means the ESC is sending power back to the source, a LiPo battery. Your concern of inefficiency is still present by the fact that there's a rapidly changing speed motor, and that wastes quite some power in form of heat on the motor because any acceleration and deceleration on electric motor waste power as some of the energy in form of magnetic flux doesn't get converted into mechanical energy, thus heat.
@fabianrudzewski9027
@fabianrudzewski9027 4 жыл бұрын
@@neutronenstern. the esc has capacitors on it, that store energy. Though they normally work on a per-commutation scale, not per revolution...the lipo battery stores some of the energy as well. The problem, why his motor gets hot is the constant acceleration deceleration. That's literally the best way, to kill your quadcopters motors...
@MrBigShotFancyPants
@MrBigShotFancyPants 4 жыл бұрын
These are interesting ideas for rc/unmanned. But if I'm in it, I'll be flying it.
@mihailazar2487
@mihailazar2487 4 жыл бұрын
@@neutronenstern. you're right, my dude. the motor having to both accelerate and decelerate means it'll roughly drawn in twice as much power than a conventional design. also, because the blades can swing up and down the helicopter becomes very unstable when making pitch or roll maneuvers because then the girosopic precession will yank the rotors with a far greater force than the aerial drag can induce, resulting in an instant total loss of control 04:31
@pmgodfrey
@pmgodfrey 4 жыл бұрын
2:33 -- That's never gonna wor..... 5:38 -- My god!
@CMDRunematti
@CMDRunematti 4 жыл бұрын
took you 3 minutes to finish the sentence?
@georgeshapiro301
@georgeshapiro301 3 жыл бұрын
This is awesome. This is easily one of the best drone projects I've seen on KZbin. It's accessible, direct, detailed, and actually explores something new. And it works!.
@JoelCreates
@JoelCreates 4 жыл бұрын
Yeah the design is cool, but I came here to see Tom wink at me in slow motion ;)
@blendertestguy5728
@blendertestguy5728 4 жыл бұрын
New video When!?
@HarryPorpise
@HarryPorpise 4 жыл бұрын
How dare Tom not reply his wink ;) also here 1:53
@JoelCreates
@JoelCreates 4 жыл бұрын
@@blendertestguy5728 not sure, juggling a few ideas!
@skully_8500
@skully_8500 4 жыл бұрын
Michael reeves wishes he was you Joel
@Jer_Schmidt
@Jer_Schmidt 4 жыл бұрын
I love this! Using software to eliminate hardware. Amazing!
@axiom1650
@axiom1650 4 жыл бұрын
Nice seeing you around Jeremy! Looking forward to your next project!
@BlackedBeast
@BlackedBeast 4 жыл бұрын
That’s a smart way to see it
@coccoborg
@coccoborg 4 жыл бұрын
pretty much as flybars were killed by 3d gyros
@superskullmaster
@superskullmaster 4 жыл бұрын
But it will never be able to do 3D.
@voornaam3191
@voornaam3191 4 жыл бұрын
@@superskullmaster You meant 8D? Typo?
@matthewkurtz5129
@matthewkurtz5129 4 жыл бұрын
You have thoroughly impressed this helicopter pilot. This is amazing.
@adam100a8
@adam100a8 4 жыл бұрын
Thank you for your service
@speedoftime_8021
@speedoftime_8021 3 жыл бұрын
ya what adam100a said
@IlliniRob1
@IlliniRob1 4 жыл бұрын
After 10 crashes: "I thiiiink I might have to make some changes to the code." Well done dude! This is awesome!
@pedram.mp4
@pedram.mp4 4 жыл бұрын
He is trying to show that he is qualified to work at Boeing
@smokingsamosa
@smokingsamosa 4 жыл бұрын
If going_to_crash == True Don't() Endif
@CaveyMoth
@CaveyMoth 4 жыл бұрын
He sounds like Elon Musk.
@redsquirrelftw
@redsquirrelftw 4 жыл бұрын
I thought that was funny too. I think we've all been there lol.
@mgraemem
@mgraemem 4 жыл бұрын
@@pedram.mp4 HA!
@rctestflight
@rctestflight 4 жыл бұрын
So good! It's great to see this kind of stuff is possible outside of a research environment
@robtomben
@robtomben 4 жыл бұрын
Keep doing what you're doing Daniel. We love watching you guys innovate and make badass stuff.
@jacobcreech4382
@jacobcreech4382 4 жыл бұрын
Two of my fav KZbin channels for sure!
@fazrulrusdi3709
@fazrulrusdi3709 4 жыл бұрын
You both are my fav.. Hehe..
@tisaconundrum
@tisaconundrum 4 жыл бұрын
Woah! 3 of my favorite KZbinrs commenting! Wow!
@voornaam3191
@voornaam3191 4 жыл бұрын
Outside?! Did you just write, he did not do any research for this project? Please call anything within reach of his hands his Personal Research Environment.
@lennymecca968
@lennymecca968 2 жыл бұрын
Helicopter pilot from Fl, USA. Well done. This is a very interesting concept. Problems with larger scale vehicles would be vibration. The tail rotor must be constantly accelerating and decelerating to compensate for a continuous changing torque output from the motor.
@ant0n-yt
@ant0n-yt 4 жыл бұрын
I don't think some people are understanding just how insane this actually is. It's like a helicopter, but not at all... I love this so much
@earth9258
@earth9258 4 жыл бұрын
Yes. I figured it was just going to be a fixed pitch helicopter not a swash plate alternative
@muchozolf
@muchozolf 3 жыл бұрын
Sometimes I really wish I haven't gone down the helicopter rabbit hole. This is not one of these times.
@alanstanton6308
@alanstanton6308 4 жыл бұрын
Stunning. You can learn something new every day - in a most enjoyable way.
@TomStantonEngineering
@TomStantonEngineering 4 жыл бұрын
Thanks Grandad!
@creanatexinkludes0007
@creanatexinkludes0007 4 жыл бұрын
That is true
@greatnate3816
@greatnate3816 4 жыл бұрын
@@TomStantonEngineering what?!?
@simeondermaats
@simeondermaats 4 жыл бұрын
@@greatnate3816 They share the same surname, so it's not a far stretch
@meyer.oppelt
@meyer.oppelt 4 жыл бұрын
@@simeondermaats .......
@Forexfox99
@Forexfox99 4 жыл бұрын
I’m here for the grass. That grass is amazing. It’s so green and perfectly mown. I love the stripes.
@Mullersemacesso
@Mullersemacesso 3 жыл бұрын
hahahaha
@epauletshark3793
@epauletshark3793 3 жыл бұрын
It is very nice grass.
@MattWeaver909
@MattWeaver909 3 жыл бұрын
I wonder what kind of grass is it
@lbjgiannisdagoat4713
@lbjgiannisdagoat4713 3 жыл бұрын
I think you just hit on your grass with yo Pipe. 🥴
@LeglessWonder
@LeglessWonder 2 жыл бұрын
Hi dad lol
@WillProwse
@WillProwse 4 жыл бұрын
Incredible! Who would have thought that was possible. Good job.
@leviahamefula3994
@leviahamefula3994 4 жыл бұрын
Will Prowse!! 🙌...my best DIY solar power KZbinr.
@Johnyknowhow
@Johnyknowhow 4 жыл бұрын
Rest assured Tom, that nearly seamless transition from wide to macro at 3:04 has not gone unappreciated. 😎
@smartwingsofficial981
@smartwingsofficial981 4 жыл бұрын
Like, vidit me please
@shmouel4747
@shmouel4747 3 жыл бұрын
amazing video! you could explore the "rigid rotor" configuration. Lockheed Martin used it on it's Cheyenne. It use a "flywheel" inertia to actuate its blades
@davenezrapappas4589
@davenezrapappas4589 4 жыл бұрын
Hey bud you just did the "impossible." A very big congratulations and cudo's from Las Vegas, NV - Aerospace Engineer
@DrGreerIsRight
@DrGreerIsRight 3 жыл бұрын
Where are the aliens
@flavortown3781
@flavortown3781 9 ай бұрын
Chances are he knows there is about 3 places in Vegas where you'd work as a AE and 3 of them have to do with that​@@DrGreerIsRight
@DeSinc
@DeSinc 4 жыл бұрын
when you explained the concept I was straight up not believing that it would ever work in practice. I'm still kinda in disbelief. it seems like this technique could be used to make RC helicopters much more mechanically simple and cheap to produce, right?
@chevycamaro-rp6tr
@chevycamaro-rp6tr 4 жыл бұрын
woah didnt expect you here
@Mireaze
@Mireaze 4 жыл бұрын
Possibly, however the cost of the ultra fast electronics would probably outweigh the savings
@Jakedasnake1066
@Jakedasnake1066 4 жыл бұрын
@@Mireaze you can pick up a microcontroller capable of this for about 5 bucks
@Mireaze
@Mireaze 4 жыл бұрын
@@Jakedasnake1066 a small toy helicopter is only 15
@Jakedasnake1066
@Jakedasnake1066 4 жыл бұрын
I was just illustrating the relatively low costs. I meant YOU could pick up a micro controller for $5, on a diy friendly breakout board like an arduino. The controller itself is likely less than a dollar, and I guarantee those $15 helicopters already contain at least one
@braveapollo5872
@braveapollo5872 3 жыл бұрын
Unbelievable, as an avid helicopter and drone builder for decades, I’m trueky amazed that you even attempted this, and that you made it work is incredible
@ELECTRONOOBS
@ELECTRONOOBS 4 жыл бұрын
I'm literally amazed!!! So good job! I've been trying this technique for a lot of time now and couldn't achieve a good sine control of the brushless motor. U use a double H bridge for control or a customized ESC? Will you share the software somewhere? Once again, so good work! :)
@TomStantonEngineering
@TomStantonEngineering 4 жыл бұрын
Thanks man! I used a t-motor F30A esc and communicated with Oneshote125. Here is a brief run through of the setup: kzbin.info/www/bejne/j2SUc5uHidSblbc
@ELECTRONOOBS
@ELECTRONOOBS 4 жыл бұрын
@@TomStantonEngineering thanks! I'll give it a good look.
@ferrumignis
@ferrumignis 4 жыл бұрын
Just thinking that adding some reduction gearing between motor and rotor could make the control easier since the acceleration/deceleration could be over several motor revolutions. Obviously the motor would have to be running faster overall though.
@ctjet99channel
@ctjet99channel 4 жыл бұрын
@@ferrumignis that could offer a bunch of other benefits too, good call. A small geared motor or belt driven could be pretty awesome and possibly make it easier to miniaturize
@PunakiviAddikti
@PunakiviAddikti 4 жыл бұрын
@@ferrumignis True, the motor would have to spin faster. But this has been used in many, many toy helicopters. It takes a bunch of load off the motor, and increasing the RPM is easy when the motor doesn't have to work as hard.
@TheBoshy
@TheBoshy 4 жыл бұрын
US Gov't: We'll take your ENTIRE STOCK
@calebsherman886
@calebsherman886 4 жыл бұрын
They already have something like this I think
@calebsherman886
@calebsherman886 4 жыл бұрын
Look up "FLIR Black hornet"
@microbuilder
@microbuilder 4 жыл бұрын
@@calebsherman886 The guy that came up with that design used to post on RCGroups, the original versions actually used a swashplate, just the smallest, most unusual looking one youve ever seen. Not sure if theyve changed to this rather amazing technique or not since then, but both are pretty freakin amazing!
@IlliniRob1
@IlliniRob1 4 жыл бұрын
@@calebsherman886 Yeah, if you find confirmation that Black hornet uses this method, I'd be curious. I've looked at images, but am not sure.
@UselessBlax
@UselessBlax 4 жыл бұрын
lol.. NO ! they will probably choose a 15k $ rc helicopter instead of a simmilarly capable normal 200 $ rc heli with an 100$ camera
@dennisbeever8495
@dennisbeever8495 2 жыл бұрын
Another staggering piece of back yard engineering from Tom. It warms my heart to see young people doing serious engineering like this. Its where the truly great innovations are born. well done Tom - another outstanding piece of work and very well presented.
@honixfpv2772
@honixfpv2772 4 жыл бұрын
I just don´t know, if the word "genius" is good enough for him.
@karthick86c
@karthick86c 4 жыл бұрын
He has spent time in properly learning the fundamentals hands on from a young age. I believe that is his secret sauce.
@mariopuzo4509
@mariopuzo4509 4 жыл бұрын
Not enough syllables
@mariopuzo4509
@mariopuzo4509 4 жыл бұрын
@@karthick86c that's secret everyone sauce.
@muralidharan1998
@muralidharan1998 4 жыл бұрын
@@karthick86c indeed🔥
@velosapien
@velosapien 4 жыл бұрын
Einstein's reincarnation perhaps?
@Aniruddh-_
@Aniruddh-_ 4 жыл бұрын
Tom is perfect example of practice makes man perfect 👍
@lembriggs1075
@lembriggs1075 4 жыл бұрын
Wow! Very nice! Very educational! Thanks for sharing your engineering, thoughts and ideas! My parents bought me a 5 in 1 water pump kit back in the late 70’s. Was probably the best gift ever for a 12 year old! It probably has much to do with why I often can understand and troubleshoot a hydraulic system so quick and accurately while others stand and give blank stares.
@walkerx1813
@walkerx1813 2 жыл бұрын
...you wouldn't happen to know where I could get that kit would you
@supergiantbubbles
@supergiantbubbles 4 жыл бұрын
Wow, that's really incredible. Your persistence is admirable.
@Huhnmonster
@Huhnmonster 4 жыл бұрын
Tom, just wanted to join in and say: Amazing work, this was truly impressive. Did not think something like this would be possible
@alishanmao
@alishanmao 4 жыл бұрын
Great job dude. now you can sell the code and get millionaire :D
@harukinoobie5966
@harukinoobie5966 4 жыл бұрын
*get a millionaire*
@adityamathur6938
@adityamathur6938 4 жыл бұрын
@@harukinoobie5966 he'll get so rich he will buy a millionaire.
@isetta4083
@isetta4083 4 жыл бұрын
Why must everything be about profit
@voornaam3191
@voornaam3191 4 жыл бұрын
@@isetta4083 King said: I have a dream. And the rich kept on dreaming of being richer. Who cares for people?!
@simonr8721
@simonr8721 4 жыл бұрын
@@isetta4083 For a person like him more money means more funds for bigger projects. Nothing wrong with that.
@arwo1143
@arwo1143 4 жыл бұрын
I fly helis, this is impressive But I think that the connection between the rotor and the rotor head is under way to much stress to be reliably After all, you are wobbling the entire rotor blade 3000 times a minute
@TechyBen
@TechyBen 4 жыл бұрын
Reliability can be tuned. No worries.
@TomStantonEngineering
@TomStantonEngineering 4 жыл бұрын
That is true with it being 3D printed, however an actual helicopter rotor head pivots every rotation too. So there's no reason an aluminium rotor head with bearings won't work well. Thanks!
@ichbrauchmehrkaffee5785
@ichbrauchmehrkaffee5785 4 жыл бұрын
Has anyone ever done any studies about dynamic strength of 3D-printed parts with various printing methods? This is something I'd be very curious about
@truepennytv
@truepennytv 4 жыл бұрын
@@ichbrauchmehrkaffee5785 There is a youtube channel called CNC Kitchen that might interest you, he has made a lot of videos about stress-testing printed parts and usually he can record hard numerical values using his testing rigs and makes very informative little graphs.
@PunakiviAddikti
@PunakiviAddikti 4 жыл бұрын
@@truepennytv I second that. CNC kitchen is the way to go.
@jasonschiff4278
@jasonschiff4278 4 жыл бұрын
When you said Drone Helicopter Hybrid I assumed it would be a drone with helicopter style props.
@pvtaitchison
@pvtaitchison 4 жыл бұрын
Me too
@xxrecoverxx
@xxrecoverxx 4 жыл бұрын
well this does exists already and has a glow version too, it's crazy, recommend checking out, it calls stingray 500
@neotock
@neotock 4 жыл бұрын
I do too, and straight thinking why would you make something simple to a more complex thing?
@PenPeng
@PenPeng 4 жыл бұрын
The worst of both worlds :D But I would totally love to see it
@OpreanMircea
@OpreanMircea 4 жыл бұрын
but that's going backwards bro
@DP-nr1hz
@DP-nr1hz 4 жыл бұрын
I am so beguiled by the huge helicopter build, all those shiny parts!
@patmcbride9853
@patmcbride9853 4 жыл бұрын
The refinement process must have earned you the nickname of "Blade Ruiner".
@HDfoodie
@HDfoodie 4 жыл бұрын
OMG!!! This ModLab paper is one of my favorites. Like you, ever since I found it I’ve wanted to replicate it. Great work Tom. I love following your projects. You are inspiring!!!
@Westwoodshadowgaming
@Westwoodshadowgaming 4 жыл бұрын
I literally said "Thats incredible" out loud when you showed the slow motion of the simple helicopter changing blade angles.
@voornaam3191
@voornaam3191 4 жыл бұрын
But he explained it first, so you knew what was coming in that slow motion footage. Lack of imagination, perhaps? How old are you? And how flexible? I'm a bit worried. No, just kidding, he must be very smart and he knows a thing or two, too. This project IS amazing.
@lewismassie
@lewismassie 4 жыл бұрын
I really love how BPS.space, Joel creates, Practical Engineering, and probably several other tech/DIY/maker channels are also here. Love this community of youtubers
@Soldier842
@Soldier842 4 жыл бұрын
6:58 Tom: ok camera, time for an outro Camera: LEAVES Tom: ...? Camera: I FOCUS LEAVES
@Orkey
@Orkey 4 жыл бұрын
This is incredible, I can't believe it's possible
@MrHuggaga
@MrHuggaga 4 жыл бұрын
what amazed me most was how the 3d-printed middle-pieces held up O.O
@WizardUli
@WizardUli 4 жыл бұрын
I had homemade electric scooter with 3D printed pulley from PETG and it lasted > 200km (and is actually still OK though I've abandoned the project for now). Tom has similar but quite bigger 3D printed pulley on his bike : kzbin.info/www/bejne/Z6HQYoWqeNp4aaM . PETG is actually very strong and when printed with 100% infill it usually break *randomly* into sharp shiny pieces similar to glass.
@aaronale5
@aaronale5 4 жыл бұрын
Nice one.. I love when you get that "AH-HA" moment from something like this..
@MrLFXproductions
@MrLFXproductions 4 жыл бұрын
The test flights reminded me of learing to fly my Honey Bee FP all those years ago. Nice video Tom!
@voornaam3191
@voornaam3191 4 жыл бұрын
Honey Bee Fap? Strange name. What is a fap? I've seen bees before, most are called drones. Do bees fap their wings? Got no glue.
@Project-Air
@Project-Air 4 жыл бұрын
Dude. Next level. I can't believe how well this worked. This is going to put the helicopters in my next video to utter shame! 😂
@TomStantonEngineering
@TomStantonEngineering 4 жыл бұрын
Looking forward to your video mate!!!
@VoltageGuy2000
@VoltageGuy2000 4 жыл бұрын
Haha same
@desyquintero8451
@desyquintero8451 4 жыл бұрын
When he said "virtual swashplate" this is when I realized skynet had become self aware.
@felixu95
@felixu95 2 жыл бұрын
I found this idea just as fascinating the first time I saw it, glad you actually went out and made it into a helicopter! Unfortunately I don't think it's very easily scalable due to the fatigue induced at the 45° hinges, but on small-scale DIY helicopters it certainly brings the theoretical cost down. Of course, off-the-shelf swashplates exist... but this is fully able to be self-fabricated, compared to the swashplates.
@thegodemperorofmankind7yea704
@thegodemperorofmankind7yea704 4 жыл бұрын
Bruh, imagine if every school graduate was this smart and enthusiastic, mankind would have transcended years ago
@ambulocetusnatans
@ambulocetusnatans 4 жыл бұрын
Kiwi Co seems like the perfect advertiser for this channel.
@Builditathome-Restoration
@Builditathome-Restoration 4 жыл бұрын
Ifound you through the suggested videos 1 year ago still enjoying your videos. your videos are also very informative. I just made a KZbin channel so I'm definitely doing my research on how to do these builds. Thanks for all your awesome videos. Please keep it up!
@VoltageGuy2000
@VoltageGuy2000 4 жыл бұрын
I just built a drone so Im also doing research.
@Builditathome-Restoration
@Builditathome-Restoration 4 жыл бұрын
@@VoltageGuy2000 sounds great keep it up😁
@VoltageGuy2000
@VoltageGuy2000 4 жыл бұрын
@@Builditathome-Restoration Thanks! You too!
@VoltageGuy2000
@VoltageGuy2000 4 жыл бұрын
@@Builditathome-Restoration I just checked out your KZbin channel, you have some great videos! ill definitely be watching some of them.
@Builditathome-Restoration
@Builditathome-Restoration 4 жыл бұрын
@@VoltageGuy2000 awesome man😃 really appreciate that
@AuthenTech
@AuthenTech 4 жыл бұрын
Very impressive! 👏
@indicharlie
@indicharlie 4 жыл бұрын
Your explanations and the use of the high speed video make this complex feat understandable. I am inspired by your need to do something just because you think it can be done.
@FloydOutdoors
@FloydOutdoors 4 жыл бұрын
Im honestly just amazed at how quiet it is
@rlefebvre42
@rlefebvre42 4 жыл бұрын
Pretty much any small electric direct drive heli is quite like this. Particularly when not running insanely high head speeds that sport pilots do.
@guns21111boatbuilding
@guns21111boatbuilding 4 жыл бұрын
I look forward to buying one of these off aliexpress in about 2 weeks.
@ericbenjaminjr
@ericbenjaminjr Жыл бұрын
I am awe struck. I am convinced that getting this man 10 million subscribers will make the world a better place.
@brsrc759
@brsrc759 4 жыл бұрын
That's absolutely mind blowing! I never thought a helicopter could be so simple
@anquion99
@anquion99 4 жыл бұрын
Wow, no words. I can’t imagine how much time you spent trying to work out the controller program
@erik6690
@erik6690 4 жыл бұрын
If this was scaled up, would there be any means of autorotation if the motor failed or power got cut off?
@gingermattb
@gingermattb 4 жыл бұрын
No, don't think so - it has no collective pitch control.
@KaushikBala333
@KaushikBala333 4 жыл бұрын
If this was scaled up it would break before its first flight
@karthick86c
@karthick86c 4 жыл бұрын
Ah thanks for pointing out auto-rotation! That would be achilles heel of this implementation.
@theovannieuwenhuizen5756
@theovannieuwenhuizen5756 4 жыл бұрын
Nope, for autorotation you would need tot add power to the rotors. This is done by trading altitude for rotor speed. The blades will speed up as the helicopter descents. By controlling the collective pitch of the blades you can produce lift to flair the landing. The power stored in the rotor will provide lift until.
@andrewyoung4473
@andrewyoung4473 4 жыл бұрын
If there was an electronically controlled brake on the rotor, it would be able to. Not as well I don’t believe, but it would work.
@AndreBandarra1
@AndreBandarra1 4 жыл бұрын
This is awesome as always dude! Never came across that, really interesting control mechanism :)
@TomStantonEngineering
@TomStantonEngineering 4 жыл бұрын
Yeah I've been wanting to do it for ages! Thanks mate
@TechyBen
@TechyBen 4 жыл бұрын
@@TomStantonEngineering I've been waiting for this for literally 20 years. The "Piccolo" was the smallest electric heli back in the day. Now with this design, the heli might even outperform 4 motor drones for simplicity and control (current pure 2 motor helis have very little control obviously).
@mckrackin5324
@mckrackin5324 3 жыл бұрын
This is brilliant. As a heli flyer and a drone flyer, I would absolutely buy this if it was dialed in and had parts support.
@elpapoga
@elpapoga 4 жыл бұрын
Amazing, the virtual swash plate is an engineering marvel! Good work
@larrytaylor2692
@larrytaylor2692 4 жыл бұрын
This is amazing you were able to get it to work when I first started watching I was like there is no way
@OJeyjunior
@OJeyjunior 2 жыл бұрын
buddy, as a developer aspire I got to kuddos to your perseverance, when I saw the helicopter flapping around with the wrong frequency I wanted to lay on my side and cry just thinking on the debugging that would take.
@randomhubhd
@randomhubhd 4 жыл бұрын
thats really crazy
@nickelhydra3262
@nickelhydra3262 4 жыл бұрын
I thought so too!
@johnhayes6920
@johnhayes6920 4 жыл бұрын
Tom Stanton you have already inspired me. That's why I'm getting a 3d printer ;)
@MalcolmHelicopter
@MalcolmHelicopter 4 жыл бұрын
Brilliant. Deserves recognition. I hope Tom’s vast potential is fully realised.
@joaoletelier8735
@joaoletelier8735 4 жыл бұрын
"Now do an inverted, tail down funnel with it, Jimmy!" 😂 Also, great work on the heli, but a minor correction: CCPM helis can't control each blade individually as the CCPM swash mixing is programmed in such a way that whenever cyclic is applied, whatever happens to one blade will be inversely mirrored on the other blade. I think what you meant was that collective and cyclic pitch can be applied independently of one another, which is something your frankenheli cannot do.
@dogdipstick
@dogdipstick 4 жыл бұрын
Lol Frankenheli. Its not even a good frankenheli. Nope.
@nathantanti8283
@nathantanti8283 4 жыл бұрын
That is legitimately one of the most amazing ideas I've seen come to fruition
@doodskie999
@doodskie999 4 жыл бұрын
Hope the guy who discovered this gets a very good offer to some big companies. Imagine seeng drones or real life helicopters with no swashplate which leaves less mechanical moving parts
@aleksandersuur9475
@aleksandersuur9475 4 жыл бұрын
It's clever, very much so, but probably not very practical. First it only works because the drivetrain is an brushless electric motor and secondly it comes with cost of extra vibration. Which probably makes it a no-sell for full size helicopters. For small drones, quadcopters have already won out in all practical aspects because they are even simpler than that mechanically. It can probably work to make cheaper toy helicopters and there is good business in that, but I doubt it will offer any benefit outside of that narrow sector.
@chandyone151
@chandyone151 3 жыл бұрын
One question: how does this accelerating and deaccelerating affect the power consumtion? If that would be a problem, one could implement something like a resonance circuit that could store and release the energy in the right moment to make it more efficient. But since the frequency of the rotor depends on thrust that would be quite tricky to adjust the resonance frequency of the circuit, it would maybe also need to be variable? 🤔
@phinok.m.628
@phinok.m.628 3 жыл бұрын
That's actually pretty genius. I wonder if the vibration from acceleration and deceleration is much of a problem for the aircraft itself and potential gear, like cameras etc.
@PunakiviAddikti
@PunakiviAddikti 2 жыл бұрын
Vibration is certainly very much an issue. The motor is literally vibrating multiple times per revolution.
@Augmented_AI
@Augmented_AI 3 жыл бұрын
Well done on getting it working!!! Well done bro!
@grey1185
@grey1185 4 жыл бұрын
You have to develop this as an actual heli, this would rip and also be very cheap to manufacture.
@illusivec
@illusivec 4 жыл бұрын
Except first you have to make electric helicopter a thing. This won't work on IC engine.
@SMGJohn
@SMGJohn 4 жыл бұрын
@@illusivec Could maybe work if you had half gears in a gearbox to achieve this. But I do not imagine that would be very good for the gearbox in the longrun.
@matth23e2
@matth23e2 4 жыл бұрын
@@illusivec You could have some weirdly shaped gears
@lukehinch3441
@lukehinch3441 4 жыл бұрын
@@matth23e2 like an oblong gear found on some mtb's
@pkramer962
@pkramer962 4 жыл бұрын
@@lukehinch3441 I don't think this would work though. Oblong gears produce a fixed oscillation that can only vary in speed, but to control this helicopter you need to be able to change the oscillation to steer as you would like. In stationary flight you would not need an oscillation for example.
@NexxuSix
@NexxuSix 4 жыл бұрын
Although this would never “fly” as a real helicopter, I believe this still has potential in certain applications, where a “standard” model helicopter is needed. Such application would be a disposable delivery drone, where low costs and complexity would be a key factor in the application. Well done!
@sirsanti8408
@sirsanti8408 4 жыл бұрын
DikoMan yeah maybe not disposable but certainly cheap and reliable
@jameshamaker9321
@jameshamaker9321 3 жыл бұрын
This is the genius, that KZbin needs, it's exactly the sort of thing I look for online. I'd like to see, an airship made with parts for a drone. That would look cool and the bag, could be a football shaped, milar balloon. The balloon, would be five feet long and six inches in diameter. It would be a high visibility color, like white or green.
@fernmr
@fernmr 4 жыл бұрын
Items: - Swashplate - Bearing Swashplate - Belt - Main gear - Secundary gear - 3 servos - 5 Links - Anti rotate - Money - Headache + New cheap and simple control system + Fun
@yellowgoose5043
@yellowgoose5043 4 жыл бұрын
C h e a p
@NikolayAgopyan
@NikolayAgopyan 4 жыл бұрын
That was literally mind-blowing how simple it is and it does actually fly! Thanks for sharing and explaining this amazing concept!
@christopherschultz2838
@christopherschultz2838 3 жыл бұрын
Crazy mad skills this guy has. You made my head spin with all your casual engineering lingo. Really man, WOW!
@LamantinoElettronico
@LamantinoElettronico 4 жыл бұрын
It's incredible how much you can achieve just by giving a weird shape to the current graph
@commiccannon592
@commiccannon592 4 жыл бұрын
4:14 Looks like every time I try to fly a toy helicopter
@VoltageGuy2000
@VoltageGuy2000 4 жыл бұрын
Very Relatable haha!
@JBHRN
@JBHRN 3 жыл бұрын
Tom... You are brilliant! Fantastic work on this. What is interesting is that this is some what like a teetering rotor system, similar to what is on the robinson helicopter. Other helicopters use a little more complex system of being fully articulated. One of the key limits of a helicopter is retreating blade stall. As the heilcopter airspeed increased the blade that is moving away from the direciton of travel, the blade needs to flap upwards to account for the loss of airspeed over the rotor blade. (Rotational speed - airspeed). Likewise, the opposite is happening on the advancing blade. Once the retreating blade stalls, the aircraft pitches up violently, loses tail rotor authority and the aircraft will rotate opposite the direction that the blades are rotating. (It is ugly). So, there are a few helicopers that use coaxial rotor systems, Kman and the Sikorsky Commanche. So my question is this... Could it be possible to take to counter rotating blades and then use a pusher proper ; then adjust the rotor RPM to control yaw? This would not likely bank or roll very well... but in terms of a stable platform on to which to mount sensors, it might be more power efficient allowing it to remain aloft longer. Might such as system negated retreating blade stall? Either way... Excellent work here. Cheers... John Hall (Prior USCG helicopter pilot)
@DominicClifton
@DominicClifton 4 жыл бұрын
That Tom, is really well done! I'm continually impressed with your dedication and patience to the stuff you make. Keep up the great work!
@javindo
@javindo 4 жыл бұрын
This is amazing! Could you imagine a full scale version of this ever having a viable application?
@Kang38290
@Kang38290 4 жыл бұрын
that would be frustrating
@beaclaster
@beaclaster 4 жыл бұрын
@@Kang38290 epic*
@flightevolution8132
@flightevolution8132 4 жыл бұрын
No, because of the increase in energy consumption and decrease in control.
@DracoGalboy
@DracoGalboy 3 жыл бұрын
I love that, during the initial launches, as the helidrone gets more altitude precrash, the camera makes noticable moves further away
@Ardjano234
@Ardjano234 4 жыл бұрын
"are a KZbinr that makes things?" -Yes, what do y"WE ARE KIWICO AND ARE YOU INTERESTED IN A SPONSORSHIP DEAL?"
@ojkolsrud1
@ojkolsrud1 4 жыл бұрын
This is sort of like watching something revolutionary. If perfected, it could greatly reduce the complexity and cost of helicopters.
@little_laughs_family
@little_laughs_family 3 жыл бұрын
This channel is underrated, it deserves much higher likes and subscriptions.
@bryanlu93
@bryanlu93 4 жыл бұрын
2:05 I swear I was back in 95' connecting to AOL dial-up or smth.
@abdomar0528
@abdomar0528 4 жыл бұрын
Found another channel as cool as Mark Rober, Smarter everyday and Turnah81 ❤️
@stevereid7140
@stevereid7140 4 жыл бұрын
Very cool idea! Its amazing how much control you can get on a brushless motor. One a side note, at the 5:00 min mark you discuss Gyroscopic precession. I've seen videos explaining gyroscopic precession in helicopter rotor head designs before and I don't quite agree with the explanation. The 90 degree input delay in my opinion has nothing to do with gyroscopic forces.... Here comes the difficult explanation .... Lets say you want the disk to tilt forward... how do you make a blade go down in the front and up in the back? You add pitch or decrease pitch 90 deg prior so it will grab air and fly up (or down) there. Just like going up a hill. You must first go up the hill to get to the top. Well, the blade must fly up there to get there, and then must fly down to get to the bottom. It makes sense that the hill starts on the side where it needs that pitch to get to the desired height, at the font and back the pitch goes neutral because it is already there, then the pitch reverses so the blade can start flying back down to neutral. I understand gyroscopic precession to be: If I were to grab the rotor shaft and tilt it front to back, I would be putting external forces into the disk. On a flying rotor head, there is ZERO " external forces " being put on the disk. instead, the blades fly them self to position. I only control the blades pitch, they fly there themselves... The only time there would be gyroscopic procession would be if I were to try to tilt the helicopter manually, like tilting the helicopter forward by lifting the tail boom by hand. This would induce precession and cause the disk to tilt sideways. All gyroscopic precession comes from an "external" source of tilt. Am I wrong?
@North49RC
@North49RC 4 жыл бұрын
This is an awesome little project, I never knew how the swash plate worked. Great information and an excellent electronic conversion from mechanical means. I am sure one could figure out with the use of a flight controller some algorithms to react to conditions like wind and inputs. Its a thinker
@kurumi394
@kurumi394 4 жыл бұрын
I absolutely flunked my aerospace final exam today because I couldn't write how a helicopter rotor blade moves I needed this video 24 hours earlier god dammit lmao
@felixbarker4400
@felixbarker4400 4 жыл бұрын
@Digadogup damn, you did him like that. This is true though, haha.
@maxk4324
@maxk4324 4 жыл бұрын
@Digadogup you fail to account for the fact that different people learn more easily in different ways. Just because the information is available doesn't mean it is available in a form that is easily understood and internalized by everyone. Maybe for some, but not everyone. I know that it took me way longer to teach myself how helicopter rotors work when I was just reading textbooks and papers than if I had access to a resource like this video. I'll give you that there are also other youtube channels who do a good job explaining it too, so in some ways your point still stands, but i also thought it was important to include the point about learning style differences as well. cheers.
@nonplayercharacter9653
@nonplayercharacter9653 4 жыл бұрын
That blew my mind. You sir are a genius.
@SnorwayFlake
@SnorwayFlake 4 жыл бұрын
Will you share the cad and code, and also a parts list, I would love to replicate this
@CamTarn
@CamTarn 4 жыл бұрын
This is incredibly cool :) It's remarkable how much acceleration those little motors can achieve. I'm guessing the virtual swashplate is difficult to scale up to larger helicopters, due to the larger momentum of all the components making it more difficult to accelerate/decelerate?
@saeedgnu
@saeedgnu 2 жыл бұрын
Gotta use liquid nitrogen to cool down the motor, like CPUs, LOL
@lionsheart1685
@lionsheart1685 4 жыл бұрын
not only your work i'm here also to admire your backyard of your house
@marcoronzani7197
@marcoronzani7197 4 жыл бұрын
This is amazing, I wander if you’d be able to archive the same effect with 4 blades!
@maselitoamazigh1385
@maselitoamazigh1385 4 жыл бұрын
you dont need that with 4 blades , maybe it would be interessting with a tricopter
@tiagotiagot
@tiagotiagot 4 жыл бұрын
I wonder how long before we start seeing something like this on cheap toy RC helicopters
@justinwhan4763
@justinwhan4763 2 жыл бұрын
I’d be surprised if NASA, SpaceX, or ULA did’t pick this guy up soon. Simply brilliant!
Optimising a VTOL
21:14
Tom Stanton
Рет қаралды 2,7 МЛН
Bladeless Drone: First Flight
5:49
Stefano Rivellini
Рет қаралды 3,3 МЛН
Мен атып көрмегенмін ! | Qalam | 5 серия
25:41
Super Capacitor Plane
13:44
Tom Stanton
Рет қаралды 3,7 МЛН
Gas Thruster Controlled Drone
24:28
Tom Stanton
Рет қаралды 3 МЛН
Electromagnetic Aircraft Launcher
15:09
Tom Stanton
Рет қаралды 2,5 МЛН
I Built The First LAMINAR FLOW ROCKET ENGINE
15:51
Integza
Рет қаралды 3,6 МЛН
Vortex Cannon vs Drone
20:44
Mark Rober
Рет қаралды 24 МЛН
I put ChatGPT on a Robot and let it explore the world
15:24
Nikodem Bartnik
Рет қаралды 1 МЛН
Making TNT
20:40
Apoptosis
Рет қаралды 2,1 МЛН
Building a V22 Osprey - Part 1
12:22
Tom Stanton
Рет қаралды 2 МЛН
Building a DIY REAPER Drone... Ended Badly
9:19
Michael Rechtin
Рет қаралды 2,3 МЛН