FPV QUAD - BROKEN Motor not spinning or Esc? | DIAGNOSE & REPAIR TUTORIAL

  Рет қаралды 113,895

Drone Camps

Drone Camps

Күн бұрын

Пікірлер: 232
@danielstewart7932
@danielstewart7932 3 жыл бұрын
I can't thank you enough for this tutorial as I was at my Witt's end.
@dronecamps
@dronecamps 3 жыл бұрын
You’re welcome
@garycarl3492
@garycarl3492 6 жыл бұрын
I really look forward to the videos I would be totally lost with out all this information Thank You Justin
@whereasthepeople
@whereasthepeople 4 жыл бұрын
I too. He is a god send. Justin I hope you get all you wish for
@waynesworld8930
@waynesworld8930 6 жыл бұрын
dude your deff in the top five drone ch,just keep doin what you do,explaing so all can understand an givin your honest oipin luv you man!
@dronecamps
@dronecamps 6 жыл бұрын
Thanks Wayne. Trying to help others my friend.
@paulorobertoevangelista7120
@paulorobertoevangelista7120 3 жыл бұрын
Thank you man! Always time well spent learning from you!
@Funcentric
@Funcentric 4 жыл бұрын
Jeans = great hand towel. Got it. Excellent video. Thanks for the detail and for the close up camera angle. This helped a lot.
@briandobbs6895
@briandobbs6895 4 жыл бұрын
I'm new to drones I've been in it for a couple years but I was fine dji's and unique and an office for the first few years that we learned a lot from you thank you
@illpro2
@illpro2 6 жыл бұрын
Just had a 4 in 1 ESC go bad. Thanks, I used this video to troubleshoot the problem.
@michaelpasini6894
@michaelpasini6894 2 жыл бұрын
Babyhawk R Pro? That’s a pretty sweet giveaway. I’ll throw my hat in!!!!
@JohnFSmitheugene
@JohnFSmitheugene 6 жыл бұрын
Great video, Justin. Super good example of how to deduce where the problem is. Enjoyed it as I enjoy all your videos.
@doctordrone3445
@doctordrone3445 5 жыл бұрын
Another great video Justin, thanks for helping the new guys to be able to diagnose their own quads.
@austinmay6415
@austinmay6415 4 жыл бұрын
Thank you SOOOO much! I recently got a Emax Tinyhawk 2 and crashed it. One of the motors were not spinning correctly and I thought I was going to have to replace the whole 60 dollar logic board that had EVERYTHING on it. After I watched this video I bought a new 10 dollar motor and it works great, thanks to your diagnosing!
@look2christ777
@look2christ777 3 жыл бұрын
Is it difficult to solder the wires to such a tiny board?
@austinmay6415
@austinmay6415 3 жыл бұрын
@@look2christ777 Yeah, It takes some practice, the hardest part is not to bridge them, remember to NOT plug it in until you have checked for bridges. I recommend a micro sized soldering iron with flux, this will help a lot.
@opossumfpv
@opossumfpv 3 жыл бұрын
Had my motor on my geprc rocket die today. Used this to fix it. Thanks!
@Goludan
@Goludan 5 жыл бұрын
Best drone info on the interwebs. Damn I'd be grounded without ya man. 1st time I've killed a motor but soooo stoke I learned to diagnose the problem and that my FSC/ESC is ok.
@XZLR8N
@XZLR8N 6 жыл бұрын
It took me buying a whole new set of motors for my micro to figure out the ESC was the problem. Thanks for the easy solution.
@dfw_sleepypillz1007
@dfw_sleepypillz1007 6 жыл бұрын
Awesome content, if this video woulda been here 6 months back, it coulda saved me a ton of headache. Rock on man!
@DroneOn
@DroneOn 6 жыл бұрын
I learned all this the hard way. You are helping allot of people here. Great job and video.
@danlatu209
@danlatu209 6 жыл бұрын
You can use the arrow keys to raise the throttle incrementally, sometimes a mouse or track pad can raise throttle to aggressively.
@defiantdj8463
@defiantdj8463 3 жыл бұрын
Boom, back in the air!! nice touch!
@FPVHans
@FPVHans 3 жыл бұрын
Old but gold 🤝
@nangkafpv
@nangkafpv 3 жыл бұрын
life saver video!!!.....thank you so much for this video...
@drScorp1on
@drScorp1on 2 жыл бұрын
Really useful video, maybe also hint at BLHeli32 (not the configurator) or tell people to first check what flight controller they have in case it's not a DIY build.
@cenabitednbfpv587
@cenabitednbfpv587 6 жыл бұрын
Ty this was a push I needed..... Been a patron for a min, and very thankful... Would love to win either!!
@BigAlFPV17
@BigAlFPV17 6 жыл бұрын
Excellent tutorial video Justin!! Looking forward to more of these kind of vids 😊
@brentnunley2600
@brentnunley2600 6 жыл бұрын
Awesome tips for us new guys. Thanks Justin!
@Heiple2007
@Heiple2007 6 жыл бұрын
Very helpful for folks Justin. Jeff
@dronecamps
@dronecamps 6 жыл бұрын
Thanks Jeff.
@TheMellema
@TheMellema 3 жыл бұрын
This is exactly where I needed to be. Thank you. I feel confident to fix this myself. Can't wait to see the results...except I just replaced my ai1 board from HOMfpv on my Micron2 HD. I'm told these all in one boards have issues. ugh.
@morfeus3100
@morfeus3100 5 жыл бұрын
Now i know it’s only my motor not my 4in1, thank you from France
@briandobbs6895
@briandobbs6895 4 жыл бұрын
Hey buddy I love you reviews man and I watch him all the time thank you very much for all this information we do appreciate it
@yamahadunes
@yamahadunes 4 жыл бұрын
Awesome info dude thank you so much. Subscribed
@juneloko
@juneloko 6 жыл бұрын
Justin dronecamps your the best thanks for all the 👍 video's
@firstpersonq2346
@firstpersonq2346 6 жыл бұрын
Thank you for mentioning that the esc wire order doesn't matter. Very helpful 😋
@scritchfpv1119
@scritchfpv1119 6 жыл бұрын
Thanks for all the great info.. Just built my first FPV.. Maiden flight tomorrow
@prefpv1064
@prefpv1064 6 жыл бұрын
I think I have a motor going bad, now I can figure out for sure! Thanks for another awesome giveaway
@fescobar1000
@fescobar1000 3 жыл бұрын
thank you so much this was so helpful!!!
@dronecamps
@dronecamps 3 жыл бұрын
You’re welcome!
@ginos5081
@ginos5081 4 жыл бұрын
Good video
@msmolly3082
@msmolly3082 6 жыл бұрын
Very good info. Can save you time and $. All good.
@i.v.2824
@i.v.2824 6 жыл бұрын
Nice quick to the point.
@ursmettler1669
@ursmettler1669 6 жыл бұрын
Very good video., helpful thanks.
@oleksiy2090
@oleksiy2090 4 жыл бұрын
Thank you :) Crashed my Larva X, motors does not always arm and one motor barely spins. Debugged it the way you showed, going to order new motor.
@jpslaym0936
@jpslaym0936 6 жыл бұрын
Thanks J Great practical info as alway and what you do better than most in hobby. - James in LA CA
@techFPV5964
@techFPV5964 2 жыл бұрын
Hi Justin thank you for the great videos, you have helped me in more then one. I have a question i have a loose motor wire going into the motor ESC1 but i cannot connect to Belheli config software. I tried another quad of the same drone. I have 2 hglrs Arro3 4s but my newest arrow3 drone and the software also will not connect. Can you give me a quick reason why i cannot connect to my motor number 1 via my BELHELI? Ive nevrr had a problem Connecting to Bel HelI Arrow3 4s motor1? Can you tell me what im wrong?
@aerialcraftibiza1069
@aerialcraftibiza1069 4 жыл бұрын
Super helpful video, one motor stopped turning after a prop fell off and the drone crashed as I didnt screw it properly. I tried to connect it to BHeli configurator to see if the ESC is ok, but after pressing read setup it says reading setup finished but nothing shows up on the screen. Does this mean the esc is broken ?
@edelossismuut3680
@edelossismuut3680 6 жыл бұрын
Nice video 👍
@RGMGFitness
@RGMGFitness 4 жыл бұрын
Just what I was looking for. My back/left motor (just like yours)...we'll, it's *'twitchy'* . Guess one to many hits to the tree...thanks for the tutorial!
@dronecamps
@dronecamps 4 жыл бұрын
You’re welcome my friend 👍🏻
@RGMGFitness
@RGMGFitness 4 жыл бұрын
@@dronecamps Just tested...it's a bad motor (#1)...ESC is just fine. Excellent tutorial (right to the point)..already ordered a new Motor! And that's why I have a back-up quad. Thanks again!
@RGMGFitness
@RGMGFitness 3 жыл бұрын
Well, just replaced the 'twitchy' motor this evening. Fired it up...and, same problem exists.
@RGMGFitness
@RGMGFitness 3 жыл бұрын
*UPDATE* : FYI: It actually ended up being the 4-N-1 ESC. Even though appeared fine in BLHeli.
@dx3385
@dx3385 6 жыл бұрын
Badly needed this!!!! Thank you!!!
@MystikSquash
@MystikSquash 6 жыл бұрын
Awesome work ninja! Always help out 🙌🏽🙌🏽
@bumbleboltfpv3707
@bumbleboltfpv3707 6 жыл бұрын
Thank you soo so much for these videos.
@noobieflight2614
@noobieflight2614 3 жыл бұрын
Thanks man now I figured out that one of my motor #2 mobula 6 hd is not defective
@noobieflight2614
@noobieflight2614 3 жыл бұрын
So bad I just got this order from Banggood today waited 10 days to get it. Ohhh mennn
@abrahamtan9704
@abrahamtan9704 3 жыл бұрын
@@noobieflight2614 contact happymodel, they are great they will probably replace it
@jayholt2101
@jayholt2101 6 жыл бұрын
Very good repair. I have this problem right now. So you are saying if I can see all 4 ESCs in Blheli then I know they are all working?
@powdermonkey447
@powdermonkey447 6 жыл бұрын
Dad with Kids No. My ESC (Babyhawk R Pro) is defective but I can still see it in BlHeli.
@timothyb6017
@timothyb6017 4 жыл бұрын
I have the same problem on my TH2. My ESC all comes up in blheli..but after getting a new motor soldered the new one still stutters. Should I be checking something else?
@RGMGFitness
@RGMGFitness 3 жыл бұрын
Had the same issue. Looked fine in BLHeli but it actually turned out to be the ESC anyway. Once I replaced the ESC everything working fine again. I think looking in BLHeli Configurator is a good place to start, but it doesn't guarantee that it still can't be your ESC. At least based on my own experience to date.
@cristianjaimes9459
@cristianjaimes9459 5 жыл бұрын
Thanks for your useful video, I have a problem with my drone, when I move up the throttle stick some motors (randomly) start at the same time but there is always one motor that doesn't start (also randomly), I've tried to fix it with different batteries (40C, 70C, 75C) but at this moment I cannot get to know what is the actual problem, If you are familiar with this issue please let me know, thanks in advance
@rcjer6473
@rcjer6473 5 жыл бұрын
Keep up the awesome videos
@dronecamps
@dronecamps 5 жыл бұрын
Thanks buddy
@ontariodrone379
@ontariodrone379 4 жыл бұрын
Hey ya. Not sure if you recall but I ended up getting the Tinyawk 2 Freestyle due to your review. I've been having a blast with it. But now when I arm only 3 of my motors spin. But the one motor stutters a bit. When I do the BHeli test you talk about it shows all my ESC's and then in BetaFlight I do the test you show for each motor and #2 motor isn't spinning up. But it's not like the one in your video where it does nothing. It actually TRIES to move and does manage to move a bit...but stutters and stops. Nothing high speed but there is movement. Could it be a lose solder point maybe?
@tomgilland
@tomgilland 6 жыл бұрын
Answers one of the questions I had. How to tell if it's an ESC or motor that's gone. Thanks.
@branmanfpv1593
@branmanfpv1593 4 жыл бұрын
Thank you help me a bunch.
@DareCdn
@DareCdn 4 жыл бұрын
First of all thanks for the demonstration, I have followed your diagnostics to determine if my motor is dead or the 4in1 ESC, I did the BLheli check and it shows all four ESC's. I closed BLheli and opened and connected to Betaflight. I check the motors as you showed in your video and all four motors run fine. When I place the props back on however and use my radio to power up, Motor3 only sputters for awhile and then gradually catches up to the other 3 motors in RPM, when I increase my throttle to flight speed my quad rotates counterclockwise. So I am baffled if my motor is fine and the 4in1 is fine then does that mean my FC is messed up? Any feedback is welcomed.......... Thanks
@mikewaterman1905
@mikewaterman1905 6 жыл бұрын
well am a newbie to soldering .. I have a soldering iron .. n a welder dual Heat 100 140w soldering handle gun ..n not good at desoldering so if I desolder bad motor and switched with good motor would that mean bad ESC if motor spins on original back left side .. if other motor spins on that bad side then I have burned out motor? ..n I do thank you for all your help to
@pcllau
@pcllau Жыл бұрын
Great tip on using BL Heli to check if ESCs are fried. Unfortunately my Flywoo Firefly 1s Nano Baby v1 is fried because I stupidly tried to plug in a 1s 2000mah lipo to see if it would power it up. I guess the Goku AIO is not rated for 2000mah rookie mistake.
@dronecamps
@dronecamps Жыл бұрын
It can handle the mah. What voltage was it?
@jasonnovak7229
@jasonnovak7229 3 жыл бұрын
Much thanks!!
@SHess65
@SHess65 6 жыл бұрын
Thanks for the video, good info!
@JosephDawson
@JosephDawson 6 жыл бұрын
great reviews
@taking22
@taking22 3 жыл бұрын
Evening man. I need a little help with my hexacopter s550, I’m having trouble getting the motors to spin. I have new esc and motors. Completely new to building drones
@gregoryscaffe1681
@gregoryscaffe1681 6 жыл бұрын
Thanks for the video great info!
@maszaky
@maszaky 4 жыл бұрын
thanks, good tutorial, will you give me link for the app of BLHeli
@ExpertMinecraftgame
@ExpertMinecraftgame 6 жыл бұрын
Great vid!
@michaelrodgers9829
@michaelrodgers9829 6 жыл бұрын
Awesome video! Thanks for another awesome giveaway!
@davemalcom5257
@davemalcom5257 6 жыл бұрын
Awesome, "always makes for a rough night sleeping when your house catches on fire" lmao
@jebrc
@jebrc 6 жыл бұрын
awesome fix bro great video and awesome giveaway
@JeffreyDurst
@JeffreyDurst 4 жыл бұрын
Got me through it...thanks!
@JB-cq2wo
@JB-cq2wo 6 жыл бұрын
good job
@quinnwoolford1769
@quinnwoolford1769 5 жыл бұрын
Thanks that really helped
@erwinbruins3633
@erwinbruins3633 6 жыл бұрын
Nice one again. Tnx man.
@frankcastle631
@frankcastle631 3 жыл бұрын
Hi justin , bought a GEPRC tiny GO 1080P RTF kit . I crashed it lately and now when I arm it it just spins around in one direction and does not come off the ground at all . seems like the throttle has no effect. can send you a video of what it does so you can get a better idea. would appreciate your help to dix this issue. cheers
@Braindog
@Braindog 5 жыл бұрын
I have a Question about a Tinyhawk. I dont know what my mate did with the TH but: What can it be if all ESC show up and all Motors work properly (I crosschanged the Motors and testet. Only the 2 Front Connections work...So no ESC seems to have a malfunction like the motors dont have. ?! The only thing he said, is that he had to resolder the Powercables. I checked and didnt find anything bad. Any Idea?
@stevenriley8658
@stevenriley8658 2 жыл бұрын
Thanks!
@RYVENANT
@RYVENANT 3 жыл бұрын
I had a pretty big crash today, one motor smells weird and isnt spinning fully. BLHeli Config is picking up 4 ESCs, and the motor spins SLIGHTLY but really jerky when doing motor test in BF. Does this just mean bad motor as well? Or can I salvage this one somehow?
@Moonsauc3
@Moonsauc3 4 жыл бұрын
I have a Similar issue but its intermittent. Checked cable connections between FC and 4in1. Happened while hovering and landing (bounce with airmode, not violent) once I unplugged and plugged batt back in I reaarmed and it fired up.. Any suggestions? Thanks! I don't have a spare motor to check, would it be worth it to order one and swap? Hasn't had any flight time.
@veera.D.veeran
@veera.D.veeran 6 жыл бұрын
Great choice for a giveaway...... Awesome video... DIAGNOSIS
@bogdankot3284
@bogdankot3284 6 жыл бұрын
Thanks.for the video!!
@franciscourena5636
@franciscourena5636 3 жыл бұрын
I have an fixed wing UAV. It looks like my right wing motor may not be working since it broke from the foam when it hit the ground I fixed the foam and reconnected the motor 3 cables to the ESC. Now All servos work but the two motors What do you think the problem and the solution? Please
@MickRatanapanyo
@MickRatanapanyo 3 жыл бұрын
Hi Justin, where can I download similar version of BlHeli you're using? My TH2FS left rear motor is twitching. Thanks
@jordannovek2911
@jordannovek2911 5 жыл бұрын
Great tutorial , I needed this to learn what to do Thx. I want your bran fpv cap.Lol! I just got the raddix.
@unknownughost8779
@unknownughost8779 2 жыл бұрын
I love all us of the drone world. I need a upgrade. I fly richie
@hakancakirkan2319
@hakancakirkan2319 6 жыл бұрын
I wouldn't use another brand motor even if same size and KV, but great video to help new pilots
@whereasthepeople
@whereasthepeople 4 жыл бұрын
Awesome
@TheJoker6789
@TheJoker6789 2 жыл бұрын
Pretty sure I have a motor gone or going bad. Ordered a couple new ones. While waiting for the motor I ended up turning the quad upside down and arming in turtle mode while holding the quad I got the bad motor spinning good. Then when I flipped it back over the dead motor worked again. New motors arrive tomorrow not sure when I'll need them eventually I suppose. Some motors have plugs instead of solder some camera's have plugs some soldered. Why not put plug connectors on everything.
@dokttorwifly9779
@dokttorwifly9779 3 жыл бұрын
Is it possible for a 6s battery, if the esc 30A is connected to the peak current motor 50A? Is his ecs able to withstand
@franciscourena5636
@franciscourena5636 3 жыл бұрын
Hi What is the name if the software that connects to the drone to check the servos and motor? Please
@blakey271able
@blakey271able 4 жыл бұрын
I checked Blheli after a problem but it all looked normal yet I know the ESC was bad after I smoked a motor because it worked after I replaced it? Strange) good video anyway
@FPVish
@FPVish 6 жыл бұрын
Thanks for the great info. I need that. How about fixing/diagnose vibration issues w hot motors. Please help
@LosFPV
@LosFPV 5 жыл бұрын
Hot motor usually D too high on your PID
@cameronjacobs3144
@cameronjacobs3144 6 жыл бұрын
What's up Justin
@mafiafpv3469
@mafiafpv3469 6 жыл бұрын
Yesssss love you justin
@dylanx_fpv9442
@dylanx_fpv9442 3 жыл бұрын
So.. if I see 4 esc’s the 4 in 1 is all good? My motor is twitching and not spinning up properly... so it’s the motor?
@nickpawsey
@nickpawsey 4 жыл бұрын
Hi Justin, whenever my battery gets slightly low my motor(s) stop working. I seem to only be able to get a minute out of my battery. Have you ever had this happen?
@dusternal
@dusternal 4 ай бұрын
thankyou
@crcinternational6321
@crcinternational6321 4 жыл бұрын
Good day bro. my Tozo Q1012 drone is mid functioning, the A1 wing keeps turning (motor is still on) even if the drone is switched off. It only stop when I remove the battery terminal or when the battery runs dead.
@itechlogicsolutions1421
@itechlogicsolutions1421 4 жыл бұрын
Hi I followed this (new motir required) then problem moved to another motor, still showing all escs but motor is new and works fine byt still get a shakey spin on start up before it stops whist the other 3 keep spinning? P.s i hear a short beep just before motor stops completely? Please advise Much appreciated.
@kbkilla420336
@kbkilla420336 6 жыл бұрын
love all the great work! great giveaway. would love to have a backup quad.
@Illuzionizhere
@Illuzionizhere 6 жыл бұрын
I break motors all the time. Question: what do you do with these broken motors?
@achefpv6521
@achefpv6521 4 жыл бұрын
I have a drone wich has a motor that can spin but suddenly it gets hot and then it just can barely spin, is it because the esc or motor?
🕊️Valera🕊️
00:34
DO$HIK
Рет қаралды 20 МЛН
How Strong is Tin Foil? 💪
00:25
Brianna
Рет қаралды 62 МЛН
ROSÉ & Bruno Mars - APT. (Official Music Video)
02:54
ROSÉ
Рет қаралды 271 МЛН
Who makes the best 5" Motor? AOS Labs 5 inch Motor Testing
27:44
Chris Rosser
Рет қаралды 37 М.
FPV Freestyle Tricktionary!
16:03
Rotor Riot
Рет қаралды 244 М.
BETAFLIGHT SETUP FOR DUMMIES
29:12
Drone Camps
Рет қаралды 287 М.
How to pick the best motor for your quadcopter, now with PHYSICS!
23:32
Drone FREAKS out? How to fix it in Betaflight
22:41
Limon - Ivan Efimov
Рет қаралды 12 М.
Why Are Cooling Towers Shaped Like That?
19:48
Practical Engineering
Рет қаралды 393 М.
Learn To Test Your ESC With A Multimeter! Is Your ESC Broken?!
24:45