Dropping Single Cab 4/7 on 24" Intro Billet Wheels Drop Kit Installation

Popular 4/7 Drop Done on Single Cab By Reklez Crew!
Dropped & Aligned with Warranty is the Reklez Way !
Buy Your Kit At: www.reklez.com
Shop Line & Hours: [phone] 9am-6pm Central Time
Address: 3835 Halik St. Pearland, Tx. 77581
Online Store: www.reklez.com

[@heyitschinoable]

Wow thats a huge difference. Went from an old run of the mill stock truck to straight badass truck now..

[@ReklezSuspensionWorks]

👌👌👌

[@ReklezSuspensionWorks]

Prices on Installation is by phone only [phone]. Get Your Kit Today Atreklez.com/collections/2014-2018-silverado-sierra-drop-kits-rear-level-kits-2-4-3-5-4-6-6-9-6-10 Thank you for watching!!

[@chriskubond6314]

That really set off the truck. Looks way better! Those new wheels are sick AF!!

[@anakinbrentley7263]

You all probably dont care but does anybody know a trick to log back into an Instagram account? I was stupid forgot my password. I love any tricks you can offer me

[@flynnandres9533]

@Anakin Brentley instablaster ;)

[@anakinbrentley7263]

@Flynn Andres Thanks so much for your reply. I found the site through google and im waiting for the hacking stuff atm. Takes quite some time so I will get back to you later with my results.

[@anakinbrentley7263]

@Flynn Andres it did the trick and I actually got access to my account again. I am so happy! Thanks so much you saved my account!

[@flynnandres9533]

@Anakin Brentley happy to help :)

[@EmilioMartinez-hx6gc]

How much y’all wanna bet the next mods are stickers that say “si quema cuhh!” and a flow master exhaust 😂

[@jesusarias3908]

I have a 4 7 on my single cab year 17 and it hits

[@TheSalamikid]

Great work! Looks like a whole new different truck. It looks to me like the rear is sitting a bit lower than the front though

[@ReklezSuspensionWorks]

Thanks, different tire sizes cause it to look like that.

[@fortnightcooper5788]

Got the same pick up with a four and six launch it Z 71 Whitesville Drive

[@adriansandoval2013]

Size of tires

[@MrJuandiaz07]

Next time please record the test drive, I wanna see how smooth it was especially on bumps and pot holes

[@JonathanGonzalez-tz4dc]

Is there a full video that shows all the steps to do for all of us DIY...

[@jasonnellis3566]

i did a 3/4 drop on 2014 silverado 1500 double cab. i used 2 inch drop spindles and belltech adjustable struts at 1 inch drop. it rides ok but in your opinion if i did 1 inch drop springs and putting struts at o drop will that give me a better ride . thnx awesome vids

[@ohiyesalocke7000]

I have a 4/7 drop on my crew cab Silverado, I had to put helper bags on the back because the tire rubbed on the fenders with any weight in the bed.

[@ReklezSuspensionWorks]

Cool...

[@trentconnorfarnsworth9133]

I’m on mcgaughys 4/6 same parts and my caster is in spec2.3 on the left and 2.9 on the right...

[@krishandaabney]

Thinking about bringing my 2000 Sierra 1500 single cab only thing is that is has the torsion bar in the front. So my question is Have u ever did a coil over kit with torsion bar delete? Is so I may be making a special trip to Houston. Really love the world u Guys put out... B blessed

[@Tattooed_lowlyfe]

Front needed a 5 inch

[@MrThe302crew]

I need those bump stops who’s got a link? Or where can I buy them alone

[@statikquiroz3958]

With strut and spindles can you go with a 5? Iknow alignment wouldn be good but what if get upper control arm for that good alignment

[@Super123ronald]

Any 2007-2012 crew cab videos? More specifically 4/6 drops??

[@ReklezSuspensionWorks]

No, but would be the same thing as far as drop and parts. Thanks!

[@vicentehernandez1304]

@@ReklezSuspensionWorks I have a 2010 silverado 4 doors.whats the best drop.with out modifications.

[@kennyweaver3597]

The front needs to go down a bout a " or so more but it looks awesome

[@gotagofast_srt4]

Very nice work guys! Do you guys know what the offset of these 24s were? I have a 2007 new body silverado w a 4/6 drop and Im going to be getting 24x10 with a +31 offset. Im just wondering if you guys know if these wheels will fit my truck ok without rubbing in the front. Thanks for the help

[@boostedlobo]

What tire size is it ?

[@jrock51511]

I have a 3 , 6 belltech drop on an 08 2 door Silverado. I believe I was able to use factory spindle.. with this kit. My question is I'm now at 140k miles.. and I need to do front end work. I was just going to replace upper/lower control arms and tie rod.. etc. With new shocks/struts. Someone told me there was a modified control arm for this truck to allow better alignment.. what brand and website do you recommend I use to replace entire front end

[@josephcerda2352]

Do the 24’s rub?

[@JetValleyGamefarm]

I got a question? I got a 4,6 drop but I want the back a lil lower just like this truck and I tried to take the shackles off and just mount to the bracket I couldn’t get it to work is this truck on shackles

[@frankm8533]

Another nice kit.. what about a 03 F150 CrewCab? Any kits?

[@ReklezSuspensionWorks]

We offer a couple of parts for those years. Have a video of coil over rear kit we need to edit and post. Thanks

[@jaluco02]

Why weren’t shock extenders used on the rear..?

[@shawnreppert1493]

Would I be able to bring mine from MO to be done? I have your mini notch but needs installed, would love to have it professionally done.

[@mrpop4ever98]

truck looks nice but i thought you were gonna show the installation process

[@Dafour.8]

Looks like a 3/4 drop on a Tahoe

[@sccobby]

Why do we have to watch him take off all four caps 🤦🏻‍♂️

[@TheRealJoJoSins_YT]

How does the maxtrac drop struts compare to belltech and mcgaughys

[@alexandertapia8656]

Would 26s fit without rubbing?

[@benboyer7800]

would it be the same for a 2008 single cab with a 4/7 drop? C notch not required?

[@oneday3857]

How much will this labor cost for a 5/7 drop

[@ReklezSuspensionWorks]

Call us for prices thanks

[@UserVic817]

👍

[@killamike6403]

I have an 06 chevy crew cab I'm working on, is there a 4/6 kit for 99-07 ? I Will also be running 24s, will I habe to cut or do any major work for it to work? thanks

[@ReklezSuspensionWorks]

We sell that kit on our website. Tire info is on there too. Check it out www.reklez.com

[@1badassgt500]

I have two questions, does this kit affect the turning radius and will this kit still work with a single cab long bed?

[@alejandrosalazar5654]

Where did you get the bump stop

[@Felipe_rascon]

How much for a full bagged system for a 2015 gmc Sierra single cab?

[@Texasbroski512]

Is that an aftermarket bumpstop

[@soniac6733]

Can I do this kit on a 5/7 with 26x9/26x12 will I have any issues

[@fat4laty72]

Do you recommend a 2/4 by belltech for a 2014 ram 1500 quad cab?

[@ReklezSuspensionWorks]

Yes sell them online www.reklez.com

[@fat4laty72]

Reklez Suspension Works even if it’s 4x4? I’m so pumped to buy it from your website

[@manuelvalles2460]

Where aré hoy located??

[@lupano805]

What’s the lowest you can go on a 2016 Silverado crew cab 4x4 without putting a notch

[@Angel-ft8bv]

6inches is ideal. 7 inches is possible but very close to the frame

[@josephbostic7833]

We’re The lowering components bought as a kit or separate parts?

[@ReklezSuspensionWorks]

Click the link provided on the video. You can buy both ways.

[@jimmyramirez8844]

Will caltrac still work on this drop?

[@ReklezSuspensionWorks]

Yes they will.

[@jimmyramirez8844]

@@ReklezSuspensionWorks what’s the price for this set up on 2001 GMC Sierra

[@ReklezSuspensionWorks]

@@jimmyramirez8844 Call the shop for prices. [phone].

[@carlosestrella6571]

I have a 2017 Silverado single cab with 305/45R22 how low I can go without rubbing tires ?

[@centralvalleyshotz6664]

Maybe 3/5 more low u gonna have to go with lowpro tires

[@laredrum1411]

Do yall sell the adjustable lowering struts separately?

[@Angel-ft8bv]

Yes, go to their website

[@chrism.9497]

stock hangers?

[@sergiorosas1311]

The link for the kit please

[@ricardoarzaga4056]

Anyone know the specs on those wheels? Or their ig?

[@ulisesjaramillo9019]

Anyone know the wheel specks

[@trapspotcustoms627]

For some odd reason the GMC looks lower 🤷🏽‍♂️

[@andychen9378]

hes running low pros on stock rims, its good on the looks but not the speedometer, thats why im just waiting to save on some 24 intros instead of low pros

[@robertogarcia635]

can we get the exact link to kit hard to tell which one this is on website

[@ReklezSuspensionWorks]

Can't give you specific link since it depends on which control arms you have. Simply read the description to select the correct kit. 👌

[@antonioraigoza2648]

Do you guys do 4/9 drop? And would it have to get tubs ? Or what’s the lowest it can go without having to cut to fit any size rims

[@YungJ31]

Anything pass 7 requires tubs

[@mxtoxicleginmx2755]

​@@YungJ31 what drop you got on your truck oin your profile pic?

[@o.hdz15]

What’s caster? & is the caster on there gonna affect anything?

[@ReklezSuspensionWorks]

Nope won't affect anything like mentioned in the video.

[@roybeltran3767]

Is a notch required for a 3/5 drop on a 2018 Silverado crew cab? Thanks

[@jonathan_phx5772]

Roy Beltran no unless you are going lower but would recommend it for a better drive experience

[@eddieefyb]

Muffler delete next😫😭💀

[@soniac6733]

Do u know the length that 2018 single cab bed is

[@sinamon_stick_8079]

6.6 or 6.7

[@haydenreyes4621]

@@sinamon_stick_8079 6.6

[@7_0_sav5]

What where the tire sizes for the 24” wheels?

[@ReklezSuspensionWorks]

I believe fronts were 255/30 and the rears 295/30

[@henryro7936]

I would rather have the stock wheels on it doesn’t look so good with those 24” in my opinion.....but over all the work was done well I like the video but the owner should have been pointed towards something else more decent 🤭

[@riceburnerbiker1483]

Lowering a truck... doesn’t that make it less than a car? Can you haul stuff ? Do you scrap the bottom of all that money as you enter driveway? What happens at 70 mph in a cornering freeway, when you hit a pot hole or a bump? I don’t get it? Spending good money to lessen the weight carrying, lessen the trailer carrying tongue weight. It seems to defeat the reason of buying a truck. Mine have extra coil spring over shocks. My 1/2 ton dose 3/4 ton work . Dose this work of yours increase the trucks hauling power any? Or dose it just look cool to some? Remember “cool and stupid go together “

[@gerardohtx207]

@Rice Burnerbiker u wanna lift it instead????

[@m6ndohernandez339]

You know it's for looks right? Not to tow 😂😂

[@fuhkshet9703]

They should go lower

[@ReklezSuspensionWorks]

Maybe..

[@fuhkshet9703]

Reklez Suspension Works really just the front imo