McGaughy 4/6 Drop Kit Install On A 2017 Chevy Silverado Single Cab Truck

[@cristianrangel8471]

This is actually set at a 3/5 man. For the back to be a 6” drop the hanger has extra holes where you can move it up. Then the front the most you can get out of those struts is a 3” drop if you don’t use any of the rings. You would have had to use their 2” drop spindles to be at 4” or 5”.

[@daltoncahn55]

Thats what i was thinking too. I did a 2/4 drop on my 18 sierra 4x4 and it sits lower than this. Just did 2” coils in the front and removed my rear blocks and added 2” drop shackles.

[@MrCombatboots9]

Just did a 3/5 drop on my 16 rcsb silverado from ihc. The kit dropped it ALOT lower than i thought it would so i ordered 1.5" lift shackes, add-a-leaf, bags, and front spacers so i could drive without c notch or scrubing the front wheel liners. My truck looked like the after version of this with just a 3 inch drop shackle.

[@Jory-chevrolet]

A bro solo enfrente le pusistes los lowered struts? no le pusistes drop splinder or control arms esque yo quiero bajar la mia y no se muy bien

[@OXCFilms]

Si nomas struts nada mas

[@eduardogutierrez665]

To me is 3"/5" my truck is way more low with 4"/6"

[@Outdoors806]

Eduardo Gutierrez what I was thinking that don’t look like a 4/6

[@shorty_media6796]

Eduardo Gutierrez it’s more like a 2/4 drop

[@fedoratipper4511]

@@shorty_media6796 Bruh it looks stock height

[@jonathanlegarda8512]

He didn’t put the drop spindles so it maybe 1 or 2 inch drop in front

[@lukeo9459]

They used the wrong kit I think and put it on back words. With those hangers ur supposed to be able to use a drop shackle at the lowest setting for a 4” go one up for the 5” and use the stock one for the 6”

[@juliotrokas2560]

I think you pretty much used the kit for an extended cab or crew cab.. on a single cab you only use the 6 parts that come on the flip kit. 3 on each side . And the shackle hanger , you use the on the older trucks , 99-07 classic

[@bo4638]

So you did a 6" drop in the rear without a C notch ? you sure you went 6 inches ?

[@OXCFilms]

Yes

[@Chain01419]

Hey bro did you keep the rings on the shocks or took them off shock?

[@OXCFilms]

You use the rings to adjust height

[@jiiienterprise9304]

Looks clean AF

[@OXCFilms]

Thanks man!!! Glad you like it

[@WinternSpring]

Nice drop ! looks good I'm thinking of only doing a 2/4 I have 4x4 it snows in Colorado!

[@OXCFilms]

Even with a 2/4 it would look good because there will be less wheel gap than stock 👍

[@Angel-ft8bv]

I've seen that those struts only drop about 3 inches in the front by removing all the spacers? How many did you remove?

[@OXCFilms]

Dont remember honestly

[@lukeo9459]

That go down 3” and I don’t recommend doing that because u will have hella camber. I did that and now I have to go back add some spacers then add a drop spindle do I don’t have camber

[@jorgegonzales878]

I didn't understand what part did you change on the front suspension

[@OXCFilms]

The strut

[@chrism.9497]

did you have to use a spring compressor when you swapped out the strut?

[@OXCFilms]

Yes a compressor is needed to remove the coil from the stock strut to the new strut

[@ProjectRambo]

Love it! After the drop what was the height?

[@OXCFilms]

To be honest i dont remember but we will shoot a walk around soon. Also the height can change do to the wheel size on the trucks

[@afu-fa4277]

"we're gonna jack up the "......*bbrrrrrrrrrrrrrrrrrrrrrr* 😹😹😹

[@elijahramirez5883]

Looks badass bro😮‍💨😮‍💨but its not a 4/6 drop bro its more like a 2/4 or 3/5 its forsure going to ride better than 4/6 tho since its gonna have more room under usually on these trucks 4/6 or 5/7 leaves almost no gap on the wheels. But either way this look clean asf🔥🔥

[@Kleiberltx]

You still have the 4x4 right?

[@OXCFilms]

This truck is 2wd. But the kit was also used on a z71. I think thats as low as you can go on a 4x4 with out running into problems.

[@Kleiberltx]

OXC Films oh ic cuz I wanna dropped mine truck too, thanks

[@OXCFilms]

@@Kleiberltx nice! No problem 👍

[@sixohtree]

How about that lower ball joint hop

[@OXCFilms]

Dont understand sorry

[@LBJ02]

Does the front rub

[@OXCFilms]

No

[@UaeAlmarri155]

What color is that exactly? It’s really cool.

[@OXCFilms]

Thanks. Im not sure actually. This truck is getting repainted. Might do a walk around of the color change

[@joe713se]

Look like a 2/4

[@jameswalsh4056]

Definitely not a 4/6.

[@Miguel-ks9cd]

And the mcgaughys struts only drop to a 3”

[@Miguel-ks9cd]

@Justin Rodriguez okay iguess😂

[@Miguel-ks9cd]

@Justin Rodriguez nigga how u gone tell me wen i lower trucks😂, those struts only drop 3 inches, u must’ve got a 5 out of it by cutting yo springs

[@Miguel-ks9cd]

@Justin Rodriguez you was on 5” rubbing on stocks and had to raise it back up right? Cuz you cant afford tubs, or you dont know what tubs are cuz u aint even low😂😂😂

[@Miguel-ks9cd]

For a 7” drop in the rear the u had to keep the factory shackle brackets the hanger u put lifted it an inch so its at a 6”

[@OXCFilms]

Sorry i dont understand. We didnt keep the factory hangers. We did keep the factory shackles

[@Miguel-ks9cd]

OXC Films yea if u wouldve kept the factory hangers it would of been a 7”

[@OXCFilms]

You are right. It is a 4/6. I had forgot that we also count the extra 1" block that was removed

[@samuelyanez9887]

4/7 😂😂😂😂

[@samuelyanez9887]

7 drop is flip kit and remove the block on stock shackles

[@jaylo7614]

was that stock height?

[@OXCFilms]

Not really. A "shop" had already removed the 1" block that originally come on these trucks.

[@soniac6733]

What size bed is that

[@OXCFilms]

6 1/2

[@soniac6733]

OXC Films thanks just bought one but for some reason my bed looks longer but it’s the same lol

[@OXCFilms]

@@soniac6733 lol

[@D.J001]

Bad ass truck man, your interior is unique and different! I have the same truck but mine is the deep ocean blue color

[@OXCFilms]

Thanks! 👍. Check out our other video of the Ruined Z71. It is also ocean blue z71. Its a beautiful color and i like the way it changes in the sun

[@gabs7469]

What rims are those?

[@OXCFilms]

Escalade replicas

[@Macncheekshd2]

Anyone know what rims those are?

[@OXCFilms]

They are replicas

[@logantic]

I need that torque wrench bro hahahaha 😉

[@OXCFilms]

Lol. I got a sweet deal on it 😊

[@Angel-ft8bv]

@@OXCFilms did this truck have alignment problems

[@OXCFilms]

Not after the frame pull

[@Angel-ft8bv]

@@OXCFilms what do you mean? Was this truck crashed?

[@OXCFilms]

Sorry i thought the comment was on our other video. After the kit was installed we did need to take it to the alignment shop but no issues after that

[@adriantrejo6696]

Cool truck cuhh, pero si quema o no quema

[@OXCFilms]

No quema cuh 😞

[@marialaguna2033]

Botta pay 39000 for one of these beautiful trucks

[@OXCFilms]

They are nice truck but do have their problems, like fuel injectors going out and transmission overheating etc etc

[@marialaguna2033]

@@OXCFilms its only got 17,000 miles you think it's worth the price?

[@OXCFilms]

Honestly right now everything is overpriced. If it is a base model dont think its worth it

[@JoseOrtiz-wn9rh]

Thats not a 4/6 drop buddy

[@lukeo9459]

Ya he can 2” lower in the back he just didn’t move that hanger higher these mcgahugys kits are from like 3”-7” lol

[@jessemarquez5332]

Video says 4/6 and the first coming out his mouth " oh today will be dropping it 4/7" sounds stupid as fuck but I like your enthusiasm

[@jaredestrada6728]

does it hit with the frame with the 6in drop?

[@OXCFilms]

The bumpstops need to be cut or else the alxe will be in contact with it

[@jaredestrada6728]

@@OXCFilms do you think it would be enough with removing the bump stops or would i have to notch it?

[@OXCFilms]

You should be good with removing just the bump stops

[@jaredestrada6728]

@@OXCFilms thanks for the feed back and your time. really helped a lot!!!

[@OXCFilms]

@@jaredestrada6728 no problem. Anything else let us know 🤝👍

[@samuelyanez9887]

Why u cut the hanger just put stock shackle back

[@OXCFilms]

So that we can flip the hanger's position

[@samuelyanez9887]

4” or 5” only

[@samuelyanez9887]

In the rear

[@OXCFilms]

Ok

[@LeoVazquez-d2v]

Definitely a 2/4 drop

[@thewiseguy8794]

Let me adjust my little torque wrench

[@OXCFilms]

😅

[@gmcsierra-te5oz]

Cool truck

[@OXCFilms]

Thank you 👍

[@gmcsierra-te5oz]

I have 2015 GMC Sierra single cab

[@OXCFilms]

@@gmcsierra-te5oz you doing a drop on it?

[@gmcsierra-te5oz]

Yeah 5 or 6 Inch

[@OXCFilms]

Nice! Will look great! 👍

[@JavierHernandez-oj4lr]

Ta con madre el Torque Wrench... Those are hard to find....

[@OXCFilms]

Si. Y ay que saver usarlo jajaja

[@markbauer9393]

What size wheel and tire

[@OXCFilms]

Dont know the exact tire size but the rims are 24s

[@josebarajas2857]

That’s 3/5 drop

[@Ricktwk1212]

That’s not a 4/7 drop .. telosicooo

[@Slickk_Rickk561]

That’s a 3/5

[@2010mustangmr]

got five haterz.....

[@OXCFilms]

😣

[@fabianzavala8773]

🤣🤣 thats not no 4/6 not even close

[@OXCFilms]

🤣🤣🤣

[@fabianzavala8773]

@@OXCFilms nah im just joking man looks good tho! just got a single cab the other day

[@OXCFilms]

@@fabianzavala8773 thanks!