Рет қаралды 16,234
In this video we have an HP ENVY x360 convertible model 13M-AG001DX laptop in the 13 inch screen size, which has two damaged parts that we need to repair. First, this ENVY x360 13 has been dropped so it has some cracks / fractures in the LCD touchscreen display panel glass in several areas. Second, it already had the classic broken hinge mount issue (screen popped out from the laptop lid) on the lower right corner of the top cover, which then shattered the LCD glass and damaged the digitizer in the lower corner when it was eventually dropped. The hinge plate problem is endemic to HP ENVY models, and a long standing HP ENVY design flaw. The way the hinge fails on the 13" models is a bit different than the larger screen models, in that is is primarily a loss of adhesion between the hinge and top cover mounting plate. But the hinge still inevitably fails and has to be repaired (re-epoxied), or replaced outright as we do here.
So this vid is a twofer, we will BOTH replace the HP logo metal lid / top cover (as well as suggest an alternative epoxy patch repair for the hinge backing plate design flaw) with a 100% identical Chinese copycat part AND we will replace the complete LCD touchscreen assembly with brand new reproduction / knockoff / clone part that is not 100% the same as HP OEM, but was the only option for this model. Thus this laptop gets a complete display panel assembly rebuild! HP does not sell these parts individually, and only thru HP resellers. The HP pricing for the complete display panel assembly is cost prohibitive for this model laptop anyway, so we are going to roll with Chinese made fake HP parts.
This video shows the HP model 13M-AG001DX laptop exactly, but should be applicable to any HP ENVY x360 laptop in the 13M-AG series (13Z-AG, 13-AG series). The parts I show also should fit any 13M-AG series laptop, as well as several other 13.3" models, check with the individual parts sellers for fitment before you buy. What matters to getting the right clone replacement part is matching up the HP part numbers on the white stickers of the original parts.
The eBay and Amazon search links below are paid links, for which I may be compensated and earn a commission, if you choose to buy the parts and tools shown in this video thru them:
If you're looking for the correct 100% correct drop in replacement for the HP ENVY x360 13" back cover 609939-001 (aka top lid with HP logo): ebay.us/tBhYCk (check seller photos for the exact same stickers and HP logo visible as there are some good exact reproductions out there and some not so exact ones)
If you want to get the replacement reproduction for the HP ENVY x360 13.3" LCD IPS touch screen display panel assembly LP133WF4 (SPXA4) part (clone touch screen does max 1920 x 1080 resolution only with NO stylus feature): ebay.us/Pz7xLO or Amazon: amzn.to/3OqRoPs
For the iFixit iOpener tool I used: ebay.us/FXEaiL or Amazon: amzn.to/3O3MQ1K
The iFixit Jimmy metal prying tool I used: ebay.us/CuB4ZS or Amazon: amzn.to/3y3wbGc
The HP parts link is here, but they will no longer sell core component parts such as the L19577-001 display panel assembly to the public: parts.hp.com
Finally, here's a link to the HP maintenance and service manual for all 13-AG series ENVY x360 model laptops: h10032.www1.hp.com/ctg/Manual/...
And if I've saved you some $$ here, consider some coins for the coffee tip-jar! ko-fi.com/drshock
Chapters:
0:00 - Repair and tools needed overview
2:24 - Separating the LCD screen from back cover
11:18 - HP back cover part number identification
12:00 - Broken hinge analysis and temporary repair approach
13:35 - Replacement back cover overview
15:05 - HP screen part number identification
15:31 - Replacement LCD screen overview
17:18 - Disconnecting the LCD screen assembly
30:21 - Removing the LCD screen
31:02 - Installing the replacement LCD screen
36:50 - Separating the WiFi antenna from the back cover
40:57 - Removing the back cover
41:22 - Installing the replacement back cover
45:38 - Assembling the LCD screen to back cover
48:30 - Final inspection and testing
#drshock #hpenvyx360 #hpenvy13
Disclaimer: DrShock, the alias for the human content creator for this KZbin channel, is not responsible for any damages, injuries, losses, or liabilities associated with any repairs, upgrades, or maintenance performed on yours, or any other, product whatsoever. No warranty, express or implied, is made as to the accuracy or completeness of any information provided within this channel. Viewing and using the “as-is" information of this channel is totally at your own risk. Always wear personal protection equipment and follow appropriate product manufacturer service manual guidelines with original manufacturer parts only when performing any repairs, upgrades, or maintenance upon any product.