HP Envy X360 15-EE000NA Hinges And Top Lid Replacement

Hello, guys. Today, I am going to replace a couple of major part for this #hpenvylaptop #x360 #screenreplacement. Replacing any part for this model, specially screen or hinges, are time costly also you must have a steady hand.
BRAND: HP
MODEL: HP ENVY
SIZE: 15 INCH TOUCH SCREEN
BASE MODEL: 15-EE000NA
=================================
Follow us: / thepcphone
follow us: / thepcphone
follow us: / thepcphone
like us: / thepcphone

[@nasigorengkambingpedes]

never thought that this laptop has such silly problem. mine has the same exact problem as yours. anyway, can i just glue the screen and hinge into the case using epoxy? bc i dont think that replacing the case is possible (at least in my area), and gluing on the hinge will not be permanent solution. what is the drawback for this except for whole screen assembly replacement in case something bad happen? thank you

[@joshuaturpin]

Thanks for the tutorial! Hp designed this so badly it happens to often Pls take note that if it happens in the first year, it’s a manufacturing fault so HP should do it for free if you bought it from them

[@Katriya-y3v]

Most buy from retail stores and not them personally

[@sriharigajjelli1139]

Bro iam facing same issue they said that, it needs to change total part of display including back cover... what's the price

[@muhKUL]

Did u get it actually done?

[@acertainsomeone6975]

Followed these instructions to a T for my HP Envy x360 model 15m-ee0013dx without issue! I bought the following products on Amazon (not allowed to post links so these are the headers): - 15.6" Display LCD Replacement for HP Envy x360 15-ee 15z-ee 15m-ee 15m-ee0013dx 15m-ee0023dx 15-ee0047nr L93183-001 L93181-001 LCD Touch Screen Digitizer Assembly Bezel with Board (1920x1080 -IPS) - LTPRPTS Replacement Laptop LCD Cover Back Rear Top Lid for HP Envy X360 15-ED 15Z-EE 15T-ED 15M-EE L93204-001 AM2UU000330 Brown EDIT ****** Screen is not compatible with pens

[@babymantuck3256]

Hello, what tape did You use to secure the screen and lid back together.

[@BanishedByNightmares]

how's the display quality of that? because HP one is really good

[@acertainsomeone6975]

@@babymantuck3256 had some leftover tape that holds the iPhone screen down but any double sided tape specialized for screens would work

[@acertainsomeone6975]

@@BanishedByNightmares quality is good, but small thing to note is that the touch screen is not compatible with pens

[@REVOLSAMI]

the hinge of my envy 360 broke, i opened the screen and i found that the plastic in which the hinge screws are places (on top lid side) is broken. so i used epoxy adhesive to put the hinge back. it was quiet strong. the i put everything back together but now my laptop is stuck on tablet mode. i think there's a sensor affected when i assemble the parts. pls help

[@vitaliynovikov9510]

здравствуйте.можно ли поменять тачпад отдельно от матрицы?или они вместе склеены?

[@jukama7671]

Thank you for the tutorial! I had the same problem and just ordered the backplate, tools from Ifixit, followed your video till 6:09 and then did everything in reverse. My backplate had all the copper foil and wires already installed. I just forgot to feed camera and mic wires back down and had to open the screen a second time, but my tape wasn't as stubborn as the factory tape and it was pretty easy. I also put some hot glue in the weak spot. Be careful and don't put too much though xD Thanks a lot again!

[@SaurabhShantwan]

Hi Can you please advise where you got the back cover for HP 360 as its not available in HP service center

[@ahmedislam1801]

Hey bro. I have the exact same problem. Unfortunately i cannot seem to find any place from where I can procure the front cover of my HP Envy. Can you please let me know where did you buy it from? Thanks A lottt!!!! Great Video btw. Subscribed!!!!

[@babymantuck3256]

Hello, what is the thickness of the replacement tape used to secure screen to the lid.

[@thepcphone]

Didn't measured but anything should work as the original tape was thicker enough. Thanks

[@DeepDiveGames]

Super useful. Thanks you! I started following another video, as in this video @Thepcphone disconnects the screen from the base/keyboard panel, which seemed like an extra work at first. After getting halfway through replacing LCD Back Cover, I realised why he did that and reverted back to following instructions in this video removing the keyboard/base panel. Conclusion: Remove keyboard/base panel first as shown in this video to save yourself time fiddling with it later.

[@kingkirannarik]

Detailed video. This cost me almost half the laptop price. I wanted to do it myself but was scared to break something

[@ashleyc10]

I'm a college student who's experiencing this now pls help me how much is the repair

[@vinchiecent]

can i use a hairdryer?

[@KhamraevUZB]

thank you so much, you helped me.

[@TAICHIJOELAMP]

where are you located? how much should this cost to get fixed?

[@jyotirai3796]

Kitna cost aata hai hinge and backcover replacement ka

[@AdrianHarrisInLondon]

I just set aside my bank holiday afternoon to follow your excellent tutorial, thank you so much! I would never have had the confidence to tackle this without it... and it worked perfectly. In my case, as in the video, it wasn't actually the hinges, it was the base they screw into, i.e the plastic of the cover, which gave out... I suspect this is almost always the case. I bought the back cover from Ebay and a set of hinges, so I didn't need the hinges after all - but I'm happy thank you!

[@thepcphone]

Adrian, I appreciate your time here. It's remarkable and inspirational! Thanks 👍

[@BanishedByNightmares]

How much this panel costs?

[@1031yenyen]

Thank you, I did this and my laptop wont power on. What do I do now?

[@thepcphone]

Whats app me for further help. Thanks

[@chloegrandberg2458]

This video saved my wallet. You are a life saver

[@aliemad5211]

hello who can I buy the cover plz

[@nicholasgottwald8259]

Great job! Thank you!

[@wadeschauer648]

Why can't you use the same top cover?

[@joshuaturpin]

I think it’s because the bolts have been ripped out of the plastic backing. Potentially could be glued back in but I doubt it would last

[@thepcphone]

@@joshuaturpin absolutely 💯

[@Terentius25]

I just need to replacement hinges and lid, My screen is still fine. Any idea where to get replacements? Fantastic video, managed to get in following your guide.

[@Terentius25]

@@babymantuck3256 I did, I had to buy the hinges and lid, couldn't get through hinges alone. I got them from Ali express