Drum Cartridge MINOLTA Bizhub Printing Defects Causes and Solutions

[@manmadhansp3698]

I'm having an issue with Konica Minolta 164. The machine prints dark on photos.. text files are printed clearly.. changed the drum, cleaning Blade, cleaned the corona wire and grid, changed developer, toner, fuser roller, fuser upper roller everything.. if the Id card are printed, text area is very clear.. photo area is completely black. Please suggest

[@MrRicoh]

Corona wire do not clean because it will do nothing, just replace it with a new one and grid.

[@davidodediran716]

Great Tutorial! Thank you!!

[@MrRicoh]

Thank You.

[@khairosprivaatskool915]

my conica minolta c554e makes a red shaded area on top of every colour page. we just replaced all the colour cartridges.

[@MrRicoh]

It wasn't needed. The drum unit does not need to be replaced in this case. You need to replace your developer unit magenta.

[@davidodediran716]

What are the complete parts or kits to overhaul CYMK imaging units on Konica Minolta C452, I will make it a project after watching your great tutorial video?

[@MrRicoh]

Black: copy-expert.com/pl/p/Beben-zestaw-naprawczy-MINOLTA-Bizhub-552-652-654-654E-754-754E-C452-C552-C552DS-C652-C652DS-C654-C654E-C754-C754E-PRO-C652DS-PRO-C754-DR612K-DR711K/5493 Color: copy-expert.com/pl/c/Beben-Imaging-Unit/98/1/default/1/searchquery/c452

[@DEVICE-is9jj]

At 8:17 a vacuum cleaner sucked on a platinum washer. In the video, 2 pieces in the middle and I’ll hide it, so the 1st one is still not enough.) Hello from Russia. Can you tell me how to check on Konica Minolta bizhub c451 with error "C0208" the problem is in the tray (trays No. 4) or in the mechanics?

[@MrRicoh]

I changed PRCB in such cases twice and helped.

[@DEVICE-is9jj]

@@MrRicohthank

[@MrRicoh]

Welcome :)

[@kajornkiatkaphin4139]

Teach Change opc drum bizhub c3350 thank

[@MrRicoh]

@kajornkiatkaphin4139 Soon there will be a video about Drum Minolta c3350, fuser, transfer.

[@kajornkiatkaphin4139]

❤

[@ykbbp9265]

Hello, could you please help me? I have a bizhub c252 and I changed the chip but now I see this message on the screen, please install the imaging Unit correctly. What I need to do? Thanks in advance.

[@MrRicoh]

You have installed the wrong chip. Each color has a separate unique chip. You got the colors wrong.

[@anandsurpur8072]

I have minolta 165 e copier. Copies printing with broad white patches with not so clear prints. Is charger carona unit not fitted properly. Awaiting reply...

[@MrRicoh]

You probably have worn out materials drum OPC, Cleaning Blade, developer

[@anandsurpur8072]

@@MrRicoh please send new developer calibaration code for 165 e.

[@MrRicoh]

nie ma czego takiego

[@fishuar]

Bizhub C224e zostawia w każdym druku czarny poziomy pasek o grubości 1-4mm na dole strony przy drukowaniu, co może być powodem?

[@MrRicoh]

Brudny laser, zużyty bęben, wada na Developing roller, uszkodzona folia grzejna. Raczej nic więcej

[@fishuar]

dziękuję za odpowiedź. Da się zdiagnozować zużycie bębna po jego wyglądzie?@@MrRicoh

[@MrRicoh]

Raczej nie.

[@fajarsiburian6122]

hi, nice video. What what kind of white dust did you use? thanks

[@MrRicoh]

This is technical talc to initialize drums and blades. Look this: copy-expert.com/pl/p/Talk-puder-inicjujacy-do-listew-RICOH-KYOCERA-MINOLTA/5681

[@marcinmorris]

Hi, what cleaner solution was used? Was it regular APC or some windows cleaner?

[@MrRicoh]

Cześć, tak to jest zwykły płyn do szyb. Czasem używam pianki do plastiku, gdy są gorze zabrudzenia. Pozdrawiam.

[@marcinmorris]

@@MrRicoh dziękuję za info :)

[@jeru-nazarethgeneralsupply7773]

hi Mr Tomasz,my name is aron from Tanzania, I have the problem with my photocopy mashine,konica minolta c280, my mashine start well but it doesnt display anything in the screen

[@MrRicoh]

Yes it's a popular glitch. You have several options. 1. Unplug the drive and turn on the copier again. If it boots up, you need to replace the hard disk with a new one. 2. If there are electrical problems in your area, it is possible you have a damaged power supply. The power board must then be replaced. I mean this product from my store: copy-expert.com/pl/p/Zasilacz-MINOLTA-Bizhub-c220-c280-c360-A0EDM40101-Power-supply-230V/1842

[@ezemaanthony8989]

Please I need a solution, my brizhub C280, show strip lines each time I print, but when I make photocopies, it doesn't show..

[@MrRicoh]

Are you sure it's not the other way around?

[@ezemaanthony8989]

@@MrRicoh how, which way round

[@edidiongnkanta4001]

Mine is the other way round sharp ar6020, what do I need to do

[@nopeacefordwicked5315]

Pls what the white powder you used

[@MrRicoh]

It's technical talc, but you can use talcum powder for your hands.

[@MrRicoh]

Don't forget to subscribe to my channel.

[@borism243]

@@MrRicoh What´s the purpose of using talcum powder at the end of the process?

[@evelauretta6550]

My Konica Minolta 215 makes noises and it print faded

[@MrRicoh]

There are so many possible faults that I can't help remotely.

[@zahoorbinrahmat8373]

my printer show error 3426 bizhub 3351

[@MrRicoh]

I see you subscribed to our channel but you are not a supporter.

[@xenok100]

What the most valuable part in image unit

[@MrRicoh]

Hi, weird question. I do not know. Are you asking for a new or used part?

[@prakharjain6875]

He want to steal it

[@xenok100]

No I want to make care of it 😂😂,I mean to get good care in order to use image unit longer time

[@thebunit92]

Unintentional ASMR

[@MrRicoh]

Asmr? Interesting

[@rajankushwaha7]

Good

[@MrRicoh]

Thank You!

[@saleemjan3671]

P-6 DRUM/development unit (c) solution

[@MrRicoh]

Look this: kzbin.info/www/bejne/nIbCZn2we892i6s

[@kungfu7714]

All that work? Really? Forget it! Time to buy a new replacement!

[@MrRicoh]

It is not always possible to buy a complete replacement. It depends on the region where the copier is used.

[@jeru-nazarethgeneralsupply7773]

hi

[@MrRicoh]

⭐️⭐️💥 🔥 🧑🏻‍🔧 HI 🧑🏻‍🔧 🔥 💥 ⭐️⭐️

[@benardwanja9984]

Hi

[@MrRicoh]

Hello.

[@jeru-nazarethgeneralsupply7773]

my conica minolta bizhub c 360 show code number C2152, please can you help me

[@MrRicoh]

ransfer belt pressure welding alienation • The transfer belt retraction sensor does not detect “switch from retraction to pressure” within a given period time after transfer belt retraction clutch has stared engagement. Maybe you only have a damaged transfer belt, so take it out and check it carefully. Check that it rotates freely and that there is no damage. If you don't find anything, follow these procedures: 1 Check the connector between M1-PRCB CN14 for proper connection and correct as necessary. 2 Check the connector of M1 for proper drive coupling and correct as necessary. 3 Check the connector between PS39-relay CN124-PRCB CN3 for proper connection and correct as necessary. 4 Check the connector between CL5-relay CN103-PRCB CN24 for proper connection and correct as necessary. 5 PS39 I/O check, sensor check PRCB CN3-15 (ON) 6 CL5 operation check PRCB CN24-4 (ON) 7 M1 operation check PRCB CN14-2 (REM) PRCB CN14-5 (LOCK) C-2 to 5 8 Change M1. 9 PRCB ICP5 conduction check. 10 Change PRCB.

[@franciscoblanco1517]

364

[@MrRicoh]

Yes you are right. Thank you and I invite you to watch other videos about repairing copiers and printers.

[@zahoorbinrahmat8373]

plz replay

[@MrRicoh]

Are You channel Supporter?

[@zahoorbinrahmat8373]

@@MrRicoh yes sir

[@MrRicoh]

I see you subscribed to our channel but you are not a supporter.