Drywall Construction Workers Finish Coating Room in Minutes

Construction Workers show How to coat Drywall like a Pro
A few different tools to use when finishing drywall.
Follow @drywallgangsters - / drywallgangsters
To Subscribe goo.gl/dDcLgJ & Welcome you to join our facebook group - / 361977634254779
Makita 18V Brushless Drywall Sander & Vacuum - • Makita 18V Brushless D...
USA/UK ONLY* Buy Mens Maxkil #DRYWALL Tshirt - amzn.to/2QK0vxY
Watch all the drywall finishing steps in order below!
Pro Drywall Plastering with the Drywall Gangsters - • Pro Drywall Plastering...
Fast Drywall Taping Using the Tapepro Mud Box - • Fast Drywall Taping Us...
Taping In With Drywall Finishing Construction Workers - • Taping In With Drywall...
Construction Workers Taping Internal Drywall Corners Fast - • Construction Workers T...
DIY How to Drywall Corner Tape on New Construction - • DIY How to Drywall Cor...
Hey Send Your Construction Videos to - driveuploader....
Don't miss a video Subscribe Now! goo.gl/dDcLgJ
Follow Maxkil on Facebook / maxkilptyltd
Follow @Maxkil2 on Instagram / maxkil2
If your a professional and your business provides this service in your local area, wherever you are in the world, I invite you to add your skill set to a listing on my website global.maxkil....

[@Maxkil]

Makita 18V Brushless Drywall Sander & Vacuum - kzbin.info/www/bejne/oGrVeXmNhNStZ8U

[@marlonmaatrijk1571]

Why is there a gap in the ceiling corner on the drywall

[@pologenius21]

@@marlonmaatrijk1571 crown molding

[@seanmayo206]

That's what you call Done Right.

[@inandoutfinishing]

Can I get the links for the tools they use?

[@ryeckley7267]

Oh, no way, he’s doing it wrong. Suppose to fall down occasionally on the stilts, the mud should fall off the ceiling and collect on the floor and his clothing, he has not cussed and don’t look fatigued at all. And worst of all, who ever has to come behind him and sand it down is being treated way to good and may have problems finding another job.

[@Maxkil]

I know right, it's all in the video editing.. I even had to spray them with the hose to make it look like they were sweating.

[@cessarflom8664]

Yeah,! People think that a worker that never get dirty is not a professional right!...

[@daviddeviaherrera4314]

👍

[@burison4250]

As a DIY person, you guys are very pro and make my work look very bad 😂

[@jaimemontesdeoca9386]

Just wondering what kind of mud do you guys use love your videos great craftsmanship!!

[@sdeedenzacker]

I've done finishing for twenty years but I use a pan and knife. All the people talking bad about these guys don't know what they are talking about. They did beautiful work!

[@victorquevedo3506]

But if u give the charrola and knife them guys don't be used

[@GoogleAccount-ii9sj]

Where are the screws?

[@nailbanger2]

I just can't figure out why they're leaving the upper angles alone. Even if the room gets crown, we at least put a tape coat on for fire and bug purposes. This could be Aussie specific. They definitely work as a team!

[@nestormejia2692]

Master taping

[@BHWHenderson]

Great to watch. I can certainly appreciate the art of what you do.

[@shure46]

@2:40 ..... Do you Aussies always leave a 1.25" open joint where the wall meets the ceiling ???? I'm thinkin WTF is that !!!!

[@mazhar3447]

It was freaky

[@derekk2300]

I was just gonna comment on that. Thank god someone else did. I was wondering why there is such a huge gap between wall and ceiling?

[@medsuit1686]

Im 30 years old, ive been in the trade for over 35 years. I can say that you are 80% godlike and made no mistakes at all, because i mastered the art of coating. You can tell because my channel does not have a single video about coating or any form of construction. Anyway i will never answer to this comment anymore, because i dont need to prove anything to you haters.

[@Maxkil]

Lol, 30 years old been in the game for 35 years.

[@albertmunoz9391]

@@Maxkil nice lie u idiot you are 30 but doing this job for 35 years what kind of drugs are u using men lol

[@thyslop1737]

Good work.

[@robbiebooth2980]

Im curious why you stack the walls leaving the gap on top instead of pushing walls up leaving the gap on bottom where it eventually gets covered with baseboards?

[@misha1736]

I guess crown molding will be installed.

[@justinhc123]

Yes, crown molding

[@seadooo98]

Bottom line, Great job guys. Very neat work. I certainly was impressed. It's a shame that you can't post a video without people leaving unnecessary negative comments but I really hope you guys see right through the ridiculous comments. Thank you for taking the time to post this video.

[@Maxkil]

Thanks mate, glad you liked it. You can't please everyone.

[@kbkbkbkbkbkbkbkbkbkb]

The negative comments are few n far between lol lots of praise. And well deserved praise. Amazing work.

[@hermanooscarsolis]

Very good Job guys !!!! May god bless alls !!!!

[@100datbitch4]

God is dead Siervo.

[@chriscarnes1083]

I feel bad for whoever had to single spot screws in the entire house lol

[@pz691333]

Spotted screws = rookies

[@juanpablomendez8488]

I’m a finisher and I have to say it’s really clean job,nice job guys

[@marvinngawaka9091]

If only the client could see, an honest, neat effort, put towards, they would be so impressed. A credit to you wonderful craftsmen.. lovely work..👏👏

[@mitchholste5999]

I tried a flusher years ago for my angles. I wasn’t a fan. They round the corners too much. We use a hockey box with a three inch wing on second coat. They don’t work well together.

[@tonymac2178]

What is the reason for the gaps around the ceiling?

[@gregorymailman9733]

Cove

[@MHendrixJr]

I thought Australians had to swipe counter clockwise lol just kidding fine job guys true professionals. I'm no production drywall guy but I've hung and finished plenty so I can appreciate the speed and skills.

[@Maxkil]

But sometimes the towel is backwards... Haha... Thanks

[@Eddie_Ray]

In my local there are over 400 finishers active at any time. And almost everyone of them is the best lol. If it works go with it. Nice job guys. Clean amd fast.

[@brenyboy26]

Lol bunch of fkn queenies

[@ModernGentleman]

Fast? Bro wiped that first but joint like 20 times lol

[@Eddie_Ray]

@@ModernGentleman I’m sure you’re the best as well. Probably faster and whatever.

[@ModernGentleman]

@@Eddie_Ray definition not. But I dont wipe anywhere near that much. Its way too much time in the same spot. That's just my opinion, but im just a dumb drywall finisher with a mere 17 years of experience.

[@Eddie_Ray]

@@ModernGentleman I’m very proud of you

[@smunoz141]

I would hire you guys in a second. I’m in the business 30 years and I have seen it all. I have seen so many messy jobs.

[@durrty8]

The guy that's running the butt joints that a drywall finisher right there I'm a pan and knife guy 23 years iv been doing it started out spotting nails for five bucks an hour got moved into closets now I do it all my fast is coat is taping I use a tape rack and and pan don't use a banjo don't use the slop box I do it by hand my uncle has been doing it 72 years he taught me how to do it only thing you have to do is sand our lap marks that's about it

[@jamesavery6671]

You wrestle crocs and box kangaroo's on the weekend right ?

[@Maxkil]

Not every weekend. Lol

[@DH4Hobbies]

Everyone on KZbin could have easily done a better job.

[@michaelcharest6693]

Whatever dude, taping is an art

[@Maxkil]

He's joking that people on KZbin very critical like they can do it better

[@michaelcharest6693]

Maxkil ooohhh ok cool

[@lesneumann890]

Win the lotto

[@Harles74]

All KZbin users are incomparable skilled people... But just on KZbin

[@bigbuddaclif1]

I’ve been using a hawk and trowel for 35yrs and have no clue why he wouldn’t just use the trowel, to each their own I guess

[@jaymartin5434]

He spends more time wiping his but joints .don't see how that is fast. The flats look nice..and no ceiling corners makes it easier ..

[@alejandrobeltran8409]

The thing people fail to realize when watching “fast” tradesmen online is that it’s not sustainable and often sloppy. This fella here can do this all day. He’s neat, he’s clean, and most importantly he takes his time and does the job well and efficiently. Somebody I’d hire. I tip my hat. Cheers

[@marlonmaatrijk1571]

Why is there a gap in the ceiling corner on the drywall

[@dismaldog]

I was a solid plasterer but do a bit of Dry wall as well now and again-super quick guys-great to watch!

[@sonnuocvolg874]

Good 👍

[@marlonmaatrijk1571]

Why is there a gap in the ceiling corner

[@marlonmaatrijk1571]

@@sonnuocvolg874 Why is there a gap in the ceiling corner on the drywall

[@dismaldog]

@@marlonmaatrijk1571 -Cornice moulding-no need to close up at all

[@dismaldog]

@@marlonmaatrijk1571 -that is there so the guys can wipe their blades clean

[@nickher77]

profesionales,hombre....

[@stangaciflorin4584]

I like your tools.where fie you bought it? Is tare and online site. What is the name of your tools. I am from Romănia.

[@stevensampson5916]

Why not use a box and pump? Knock it out quicker than hand bedding. I never used hawk and trowel Just pan and knives

[@joevlogs5095]

They be saying that there are faster workers here and there but they got mud all over their clothes looking like clowns. You sir, look pretty fast and good at what you're doing and plus damn you are clean. I'm a builder but I've done plenty taping and mudding. If I was a taper the company I would wanna work for is yours. Greetings from Sweden.

[@blakeshaw5187]

I'm assuming the ones who say hes wiping to much like sanding 🤣

[@manhours1]

Blake Shaw shut your Bitch ass the fuck up nigga no one asked for us your goofy ass opinion. Fuck outta here

[@Rawb48]

The way man hours talks online proves he is a bad ass who will knock you out in person. HAHAHAHA

[@Rawb48]

You ma'am are a bum

[@jeffstone2585]

I’m going to go out on a limb and say a lot of this has to do with the mud - brand, type and how it’s mixed. Having the proper mud at the right consistency is key.

[@marlonmaatrijk1571]

Why is there a gap in the ceiling corner on the drywall

[@institches2750]

@@marlonmaatrijk1571 I'd guess that the room will have crown molding, so the gap will be covered.

[@harrygirgin9093]

He is great on the trowel with a odd way to hold it. I'm just not a fan of pizza flipper trowels though.

[@eh_bailey]

Wow, I have down a little drywall and I usually pick up things quickly, but this guy is next level.

[@KC08RAS]

Can someone tell me why there are gaps at the edge of the ceiling to external wall. Thx

[@kalikasurf]

I’m a flooring installer, so naturally it’s in my DNA to hate drywallers...........but you guys kept it pretty darn clean! Good work fellas

[@kalikasurf]

9000 RPM apparently you don’t know me........ I AM that special

[@SobatBerkarya]

Gibsun bot pati, mantap bos👍👍👍👍

[@manmonchill]

Talk about teamwork. Everyone played thier role. Reminds me of a school presentation where everyone came through with thier assignment. Even the 1 guy that never does their part in group work at school (in this case Mr camera man) even tried his best but you can tell he will be that guy that never does his work.

[@shure46]

I can't figure out why you'd "apply mud with a trowel , then skim it with a mud knife" , why not just use the knife for the whole process ???

[@geordinflett9995]

I've watched a few of these videos and these guys are true pros - well done. Clean, efficient, and quality. One question thought - why the big gap where the wall board meets the ceiling board? Is there crown molding being installed in the entire house? Is this for expansion/contraction of the house?

[@leoencalada1489]

I have the same question about the big gaps.

[@jlo5357]

It will be covered with cornice (usually 55mm) so no need to make a tight join. The fixing team generally sheet from bottom up in this case because it makes their job easier when screwing the board.

[@manuelmarinez9858]

I've watched other Videos by these guys. I was so impressed how they all work in a team. they do Great work . I hate they make it look so easy. VERY clean, I must say.

[@Maxkil]

Yeah they are the best I've seen. Thanks for watching

[@shevinsacrey5862]

Hey I've always done it with hand tools and I'm looking to get into the tools like flushed and what not but I'm trying to get as much know-how as I can before I invest in the tools. So the tool you are using to spread the mud in the corner, that's different from the tool you use to flatten the tape in the corner after you use the roller, right? The one after the roller is a flusher? Or is that what the head you are using is called?

[@rodjames1693]

1st the tape will be applied with a banjo or bazooka...then they are using a compound tube with an angle head similar to the flusher but with 3 holes in it....lastly...the flusher head is used to squeeze out excess mud.

[@shevinsacrey5862]

I understand as far as the banjo or bazooka and then using the compound tube to apply the mud. My question is, is there a difference between the angle head used to squeeze the mud out after taping, and the angle head used to spread the mud after using the compound tube. As far as I know they are different aren't they? One is a flusher head and one is an angle head?

[@michaelcard9382]

Yo..what were they doin in corners with those polls? Guy applied n guy smoothed it out? Clean work man.Why is spackle brown like that?

[@svgeskrt2921]

They really did the nails one by one lmfao just slide the 6inch on em

[@mirzasemic7789]

Only if you gonna come and sand it.

[@cozyhouse1914]

@@mirzasemic7789 😂 with a pole sander it is no extra work and striping is three times as fast, they probably had a rookie spotting their nails Since it's hard to stripe without the cordination, every expert finisher stripes their nails

[@hoa3512]

Tape & joint! Anyone with a half a brain doesn’t want this in there home.. doesn’t last/forget wallpapering it/any knocks to walls or ceiling your busting it open. Invest in plastering for a durable home.. not a cheap mass corporation product. Your welcome.

[@heraldmartinez5512]

Very nice clean work! Im a finisher myself how it should be done.

[@marlonmaatrijk1571]

Why is there a gap in the ceiling corner on the drywall

[@marhalldrywall9284]

Why do these guys put up videos of them doing the job all wrong. you never coat your seams and butts before you tape your angles and those gaps wall-to-ceiling are ridiculous. If you're going to put a video do it right. And who spots there screws one at a time. and how many times seriously are you going to wipe that but joint I could have done 3 by the time you finish that one. If you showed up on one of my jobs I would have fired you in the first 5 minutes. Sucky work. And get a pan.

[@shaunschooler9109]

Where are you guys at? I didn't know international Building code allowed us to leave wood framing not covered by a fire blocking product inside living areas. Especially at the top of a wall. Are you using a rated material for crown?

[@Mr19853]

The unfinished corners are annoying a hell out of me!

[@Maxkil]

Watch a cornice video

[@jenjenchicago5408]

Nice job guys. Keep the videos coming. Love yur work! Don’t listen to the haters

[@Maxkil]

Thanks Jenny. Love thy hater.

[@jenjenchicago5408]

Maxkil 😈

[@wilsonhernandezserna616]

Mucho personal. Se pierde mucho. Tiempo. Cada. Uno. Para cada rejuntado

[@Wjhplastering]

Stop it get your mud pan because your just wasting time or just use the hawk and trowel

[@TheMan-qv1bl]

You’re *

[@fullyerect1294]

It's not wasting time it's personal preference

[@johncaudle6703]

I agree wasting time, use one or the other hawk and trowel or pan and knife

[@DeadlyVenomKing]

What kind finishing mud is that. Name of the brand

[@jacobmcguffie]

Sure, they're good. But when I coat my ceiling joints I simultaneously apply my famous custom textured plaster floor covering.

[@Maxkil]

Me too,

[@leor4473]

Not as good as me though. My plastering leaves behind cool designs!

[@estebangarciaega1272]

What country is this looks really different everything not lights connection oh outlets that make less work

[@brenyboy26]

probando Comidas Rey Aguila Australia

[@SAYA-STERN]

THE MORE I WATCH YOU GUYS VIDEOS, THE MORE I LEARN. JUST FOR THE SAKE OF KNOWLEDGE ☺ IT IS VERY INTERESTING! OH AND YOUR ACCENT IS A PLUS!! 😍

[@panpeter2969]

I plan to become a DIY drywall finisher so pardon me if my question sounds too silly. Looks like those seams he finished already were mudded. Why did he mud them again?

[@Maxkil]

Just to fill the recess completely. These guys are perfectionists. Hehe

[@xJRx77]

How the hell many times are you gonna wipe the damn thing? Enough already

[@jerrold3685]

I used to split my butt joints on zero with a ten inch box then run down the middle on three with a twelve inch box. Rarely any problems.

[@gil-juniorriseabovebetraya5972]

Can you do the whole job using a trowel? Or do you have to use the knife???

[@anthonymaniz4077]

I would like to tell all you ladies and gentlemen that I am a master taper and yes I did come out of the womb with a trowel and a pan in either hand I sleep eat taping

[@JohnWick-mi4hy]

So that's you're 1st coat, right? That is not paint ready? Unless you guys finish off with a texture

[@mimbriac1352]

What kind of mud has that tint to it or do you guys add tint? Only a diyer (USA) and all the mud I ever used is white.

[@fernandosimone8376]

Penoso... La spatola americana l impugna al contrario... È stata fatta per un impugnatura ergonomica ma questo non ha capito niente... Inguardabile

[@gianthills]

seems the only way to get enough experience to get work is to do an apprentice, but I'm probably too old.

[@SeanMR93]

Ok might be dumb question, but the mud is yellow and dried to white or specific type of mud?

[@76shogun1]

Ha ha...if these guys saw me finishing they'd surely puke....and I'm not that bad...this takes years of experience to make it look so easy and stay so clean.

[@Maxkil]

Yeah bro me too, hard for me to ever make another drywall finishing video after posting these guys, I just think how crap i am .

[@Maxkil]

please subscribe Chris!!

[@76shogun1]

@@Maxkil hey,as long as the finished product come out sweet...in drywall you pass your own sentence..(sanding)....it'll take me alot more elbow grease ,mud and time then these guys but it always comes out great in the end.

[@marlonmaatrijk1571]

Why is there a gap in the ceiling corner on the drywall

[@lucaverdicchio3805]

Complimenti stucchi meravigliosamente! Ma perché le lastre non le mettete sfalsate e le posizionate tutte nello stesso senso? Così facendo si crepano con sbalzi termici ?

[@cyclingbutterbean]

What's with all the gaps at the ceiling at the top of the wall sheets? Legit question because I don't know.

[@jessemunoz7985]

I seen Mexicans fast as fuck no lie ... thats just yellow man durabad is under so its not as fast as you think .

[@nickprohoroff3720]

Yes good, but over working that butt joint bro. Don't need two tools either. Just sayin.

[@metallicametallica4342]

Pasas esa espatula como 10 veses esdosde echar i dos de limpiar tu tecnica es nueva york no sirve,,

[@davidjfontenot2828]

Great job guys from a finisher for 32 years

[@marlonmaatrijk1571]

Why is there a gap in the ceiling corner on the drywall

[@fullyerect1294]

Why mud the butt joint with a trowel and finish with a taping knife? Just use the one tool

[@ackmino]

Those must be 24' sheets on the ceilings. I like it.

[@Maxkil]

they are 18ft, but are only 10mm and very light. Cuts down in the finishing, barely any butt joints on a standard job. Thanks for tuning in!

[@zapad7055]

Хммммм... 13 раз провести рукой по маленькому стыку это быстро???))

[@kociewie7211]

Never finish. 🤣😂🤣😂😂

[@COMMANDER-ONE]

What do you do on those interior walls where they meet the ceiling? I’ve never seen that done before in the United States?

[@jimmybill1963]

They get a corner moulding called cornice. Plenty of different designs but the most basic and common is a cove shape.

[@chrisdavidual]

Is he using a curved trowel?

[@ЛанаХайруллина-з7п]

Очень залипательный процесс. Всегда приятно смотреть , кто делает все профессионально.

[@xbk1989120]

What tool you guys useing in the video roiling the Conner What the brand it’s

[@obitwokonobi9432]

Iv been taping jointing and plastering 20 years so I know the script. If this man is on price his family would starve lol !

[@bpdevastadorace3996]

🤣

[@gregorymailman9733]

Not really

[@JohnnyBayard]

you guys are okay at drywall. I have been doing commercial drywall here in Arizona for years.... we are way faster than you guys... we do 50 rooms or more a day

[@joegoff2051]

Look like Humpty Dumpty. YOU sand it😂😂

[@fullyerect1294]

Makes no sense to mud the butt joints with a trowl then finish it with a taping knife?

[@bajosextoaccordeonblog1677]

Why using trowel and 14” knife when u can just use your 14” knife?

[@aminfarouk8546]

طرف لي قعدت فيها 5 دقايق حنا عندنا يخدموه بلافون

[@skillsrobles]

Those corners went quick wish i had those tools. But im good with cheap ones as i am only gona do this once every few years. Wish me luck on this level 5 wall.

[@proelsavador503]

easy job

[@maxc7680]

Never seen yellowish brown mud, must be a down unda thing mate

[@yves5572]

Is it me... Or they forgot to drywall the inwards corners and now the tapers are on a strike for them to fill the gaps 😂

[@Maxkil]

90mm Cornice going up. That's what two sheets stacked equals to our standard ceiling height. Not needed to be a fire barrier here in Australia unless there is another dwelling on the other side of the wall

[@ismu34]

Hi from Melbourne. What types of mud do you guys use?

[@antonydiaz2086]

Esa masilla tanbien se puede en techo de concreto es igual el proseso

[@justmetv6725]

Your boy is good @ feathering that second coat ! I wanna work in the outback

[@robertcretu4363]

That Total lite mud is sweet. Where can I buy it in the US?

[@benjaminh4537]

is it standard to have a huge fucking gap between wall and ceiling in Australia for truss uplift or something that shit would not fly in Canada for one minute

[@drywallgangsters]

Yeah mate standard if cornice is going up. Cornice is the drywall equivalent of crown moulding

[@estebangarciaega1272]

What size of drywall you guys use I dont see any butt joint I see only seems which is awesome