Dspiae ES-P Electric Sander + GH-10 Grinding set Unboxing | scale modeling

[@a.b.scalemodels]

Well done Karl, another great unboxing.

[@KarlScaleModeling]

Thanks Adrian, that's very appreciated and also encouraging to keep making new videos too. So glad you like my content ☺️👍🏼

[@lukeduca6696]

Another great unboxing video as always mate!! 😊

[@KarlScaleModeling]

Hello there Luke, thanks for your constant support towards my work. That's very appreciated and also thanks for making this video possible ☺️👍🏼

[@JohnnysModelcars]

Thank you, Karl for another interesting video 👍

[@KarlScaleModeling]

Hello Johnny, many thanks for your feedback and for your support towards my uploads. That's very appropriate my friend ☺️👍🏼

[@epistarter1136]

What can you do with the gh-10 set? Was looking to buy this along with their drill bits but its sad they're 0.1mm too thick to fit in

[@KarlScaleModeling]

Hello, the GH-10 Burr Set bits have a 3mm shaft and are dedicated to be used with the Dspiae ES-P rotary tool, which also has a 3mm opening. They can be used for various applications like sanding and drilling. Not sure about the drill bits problem, maybe they're 3.175mm. That's also a common diameter when it comes to modeling tools. Hope that helps 👍🏼

[@joemoore4027]

Nice size too to handle, just limited to the bit size shanks at 3.0 mm. I had mine machined out to fit 1/18 shank bits and now it's worth the price.

[@KarlScaleModeling]

Hello Joe, yes the size and weight is amazing to work with. Even the power, can't complain about that too because it did a good job at every piece of work I threw at it! Obviously, model related.. didn't try to drill the wall with it 😀 yes the 3mm limitation is boring as it limits us as to what bits can be used with it. The adapter shank is helping me a lot right now. Glad you managed to machine yours to a 1/8 shank, I'm sure you're using it much more now with that modification. Thanks for your message 👍🏼👍🏼

[@joemoore4027]

@@KarlScaleModeling Thank you for the fast reply Karl ! With the 1/18 capacity it handles everything in my model toolbox. Great video on the tool review, looking forward to more videos from you Karl ! Cheers !

[@KarlScaleModeling]

Thanks Joe, I'm glad you like my video review ☺️ that's amazing that with the 1/8 modification you can now use all your bits into the Dspiae tool. You can now use it to its full potential, not just with a 3mm bit. Unfortunately my model tool box has bits with different diameters so a variable solution is what's needed. That's why I'm currently using that cheap adapter, but I'm looking for a better alternative ☺️👍🏼

[@williammarshall2935]

Great video. I also have the Galaxy version which takes 2.35 mm shank dremel bits. I probably will get another Dspiae one and drill it to 3.18mm for 1/8 shank bits . I like using the 5 & 10 mm sanding disks which are 3mm ,don't want them to wobble

[@KarlScaleModeling]

Thank you for your feedback William, that's very appreciated and so glad you like the video ☺️ I can see that people are literally modifying the original chuck of the Dspiae tool, never had thought about that! I use different diameters of bits/tools so I would like a flexible option for it. My cheap adaptor does a good job for now, but I'm looking for something more durable and rigid 👍🏼 I did see the Galaxy one and it looks quite good too. Drilling to 3.18mm and then installing 3mm bits.. I would be afraid that they'll wobble even after tightening both allen screws. Dspiae should have issued a flexible chuck right away 😀👍🏼

[@SelunaMiliki]

Стоматологические фрезы и боры с диаметром хвостовика 2,4 мм подойдут или только 3 мм?

[@KarlScaleModeling]

Hello, the chuck accepts 3.0mm bits. If you insert 2.4mm ones they will most likely wobble since they would not be perfectly in the middle of the chuck. Hope that helps.

[@emilioaguirre1634]

If you're looking for more drill like bits for the Dspiae sanding grinder you might want to buy the Galaxy Tools adapter shank, T09K11 and its drill bits.

[@KarlScaleModeling]

Hello Emilio, thank you very much for the suggestion. That's very appreciated because it's a great idea. I bought a universal drill chuck with a 3mm shaft and I'm still waiting for it to be delivered and try it out. Hearing that the T09K11 is a perfect match, I'll definitely search and buy that because I want to use the Dspiae grinder for different uses. Thanks again ☺️👍🏼

[@ロクアンドロールしかないでも好きだ]

That doesn’t exist, you sure you put the right number and description?

[@emilioaguirre1634]

@@ロクアンドロールしかないでも好きだ I found that on AliExpress, but I'll check again.

[@emilioaguirre1634]

@@ロクアンドロールしかないでも好きだ here's the link for Galaxy Tool adapter shank that should fit in the Dspiae sanding pin. a.aliexpress.com/_mMyPTac

[@KarlScaleModeling]

Thank you for your answer Emilio, that's very appreciated 👍🏼

[@michaelhintzmikesminiature1812]

Nice review. Thanks for sharing

[@KarlScaleModeling]

Thank you Michael, that's very appreciated and so glad you like my unboxing ☺️👍🏼

[@DudleysScaleModelcars]

Thank you for shaing this

[@KarlScaleModeling]

Thanks for your feedback Daniel, that's very appreciated.

[@DudleysScaleModelcars]

Your welcome @@KarlScaleModeling

[@robertmunoz7543]

There are different chuck adapters to allow different shank sizes!😁 Jman

[@KarlScaleModeling]

Hello Robert, thanks for the information. Yes in fact I got an adapter chuck for this rotary tool and even made a new video about this. You can view this here: kzbin.info/www/bejne/hHi7gKqfbcdmfq8

[@stevewatts3502]

Looks the perfect tool for delicate work in awkward areas with... maybe less aggressive tools? Shocked at the torque, fer something so small. Dunno I could stump up the wonga for it, I like my MFA-Comos. Nice show-n-tell. 👍

[@KarlScaleModeling]

Hello there Steve, thank you very much for your feedback. That's appreciated and so glad you like. Yes it is quite torquey, I tried to push it hard on the surface of the plastic and it didn't stall! If it was my bigger rotary tool, it would have definitely stalled!

[@Kmakaot]

Через 15 минут использования зашумел подшипник (щелчки), через 2 дня его полностью заклинило, одним словом «Китай». Но те первые 15 минут использования дарил экстремально позитивные впечатления, возможно мне попался брак.

[@KarlScaleModeling]

Hello Kmakaot, thanks for letting me know about this. I have used this tool many times now and so far I didn't have any problems. But I haven't used it hard, only small jobs. Hopefully I won't have problems when it comes to polishing a whole car body ☺️👍🏼

[@brushbros]

Very inconvenient chuck I must say.

[@KarlScaleModeling]

Yes, have to agree about that. I prefer a conventional chuck that is adjustable to any shaft diameter you might want to use. I got this to be used with their polishing pads, so for me it's not a big problem. But I still would have loved using other bits on it ☺️

[@c123bthunderpig]

Way too expensive for what you get.

[@KarlScaleModeling]

Thanks for your feedback 👍🏼 I had some coupons when I bought this, so can't complain about price 😊 but the 3mm chuck limitation is something I'm not happy about! Would have been better if it was an adjustable one 😏

[@bobscalemodeling9863]

Looks very interesting.. thanks for sharing.

[@KarlScaleModeling]

Thanks for your feedback Robert, very appreciated and so glad you like my little unboxing ☺️👍🏼