DTF Heat Press Pop Up Canopy - Custom Personalized Canopy (COLD PEEL)

[@eric257young]

Life saver I watched this video a few days ago and my tent looks amazing. I really appreciate the help

[@transfersuperstars]

Thank you for putting the video to use brotha! Glad it turned out great! We’ll keep making more videos.

[@MariaBonilla-q8d]

How long do you press it for? I only heard you say 275 degrees at medium pressure.

[@transfersuperstars]

We press for 7s each area

[@Sealstalker]

Thanks. I'm motivated to do this myself now as well.

[@transfersuperstars]

You got it! Its not that difficult. Give us a call or email us if you need any help with the prints.

[@adrianamazzola4104]

Can this be done on the side walls for pop up tents? What temp are you pressing at? Would sublimation work? Thx

[@transfersuperstars]

Yes. 275 degrees should do it with our DTF transfers. Sublimation will not work since the material you are printing on is not polyester.

[@anaoosterhouse345]

Hi! Can I use any type of HTV? I’m using a silhouette to print.

[@transfersuperstars]

shop.transfersuperstars.com/

[@paulmatheson3183]

What type of vinyl are you using and the temp and pressure? Mine didn't stick right.

[@transfersuperstars]

We’re using dtf transfers. I don’t think vinyl will work

[@IamAlexAdhepeau]

@@transfersuperstars Hi, what Temp did you set your press to ?

[@ClementChau]

How well will this last outdoor with potential rain or moisture? Will the letters come off from rain or fade in the sun?

[@transfersuperstars]

It holds up fine as long as you use a heat press. We've had canopies that have lasted a few seasons already.

[@arkansasbasstournamenttalk3385]

Where do you buy your canopies

[@transfersuperstars]

These were supplied by the customer.

[@slightlyhoongry1552]

What Press are you using? Thanks in Advance.

[@ross4788]

Do you think i could do this with an household electric iron?

[@transfersuperstars]

Our transfers can be applied with an iron but we recommend using a heat press for longevity, here's a video regarding iron use. kzbin.info/www/bejne/emGzdnaQrbVpbck

[@lana6777]

Is this temperature in Celsius or Fahrenheit? ☺️

[@transfersuperstars]

We heatpress our transfers between 275-300f depending on material. Are you using a heat press?

[@Bizmonger]

I'm having a difficult time finding a business in Miami, FL to press decals onto a popup tent. Any suggestions?

[@transfersuperstars]

A $165 Heat press from Amazon, $20 heat press pillows from Amazon and some heat transfers should do the trick.

[@Bizmonger]

@@transfersuperstars Thanks. I would rather pay a business to do it professionally rather than me attempting it myself.

[@srdesigneredition6407]

This is awesome 👏!

[@transfersuperstars]

Thank you! Cheers!

[@deenakelly2158]

How long can you make the transfers?

[@transfersuperstars]

We print on 325' rolls so technically our max would be around 22x300'

[@schneidermotorsports]

How long do you press at 275⁰

[@transfersuperstars]

for our transfers we only press at 7seconds

[@djmagicalartist]

Hey when pressing a big print like this, will it be an issue if an area i already pressed gets pressed again while pressing a new area

[@GeeVisionS]

No it won't hurt it at all. Just make sure to not remove the carrier sheet until everything has been pressed

[@djmagicalartist]

@@GeeVisionS thank you 🙏

[@GeeVisionS]

@@djmagicalartist No problem

[@340lou7]

What temperature and how much seconds

[@transfersuperstars]

Each DTF printer has different instructions but our transfers press at 300f for 7seconds only. We recommend heavy pressure and a 2nd press.

[@shelliekuhr7165]

Do you make and sell the transfer and I could press on the canopy?

[@transfersuperstars]

There are different size canopy's but with the correct measurements supplied by you, we can print the transfers and you can surely press them yourself. When you order from us, please request the transfer be a "COLD PEEL" so you can do a wider application for a canopy.

[@samyoung6380]

good work

[@transfersuperstars]

Thank you! Cheers!

[@GhostPatronYT]

Is it possible to apply a decal to the canopy without pressing 😂 I’ve tried is so hard

[@transfersuperstars]

I supposed you could buy a digitally printed vinyl sticker of your design, but that’s not something we’re familiar with.

[@lookitsleonardlove]

🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥

[@suffokatekc]

Where does one get the giant heat transfers made?

[@OtzleeExplains]

We print giant heat transfers. We can go 22" by however length you need. We recommend ordering the "cold peel" transfers if you are going to be doing a canopy.

[@theresacofield7038]

How many inches are the letters?

[@transfersuperstars]

For the canopy skirt, we've been doing them at 7"height max.

[@anthonyash3103]

can you print a custom logo etc on my existing 10' X 10' Canopy

[@transfersuperstars]

Yes we can print any size up to 22x100”

[@anthonyash3103]

Great. What's the process? Cost? Time frame to ship my cover to you and then getting it back. How long should the applied graphics last?

[@morgana8519]

nice

[@transfersuperstars]

Thanks

[@BlaqueSuggaDesigns]

Greetings What did you use to make the letters also what are the size of them

[@transfersuperstars]

We used photoshop with some basic fonts. We kept the sizing at 7"h x 96" tall. It was a 10x10" canopy.

[@BlaqueSuggaDesigns]

Thanks I have a canopy I wanna design😊

[@BlaqueSuggaDesigns]

What is the width of the letters

[@kimberlypremo6663]

What temp do you put the press on and for how long?

[@transfersuperstars]

We press "our" transfers at 300f for 7s, cold peel for better results. Please check with your supplier as each printer's film may vary in application instructions.