When I start my printer, the printer moves & then stops after it makes a loud noise & the ink & paper lights flash. I reset the ink waste counter. Do you have any idea what it might be?
@lorenzolozano35692 жыл бұрын
resetter software
@MC-jn9kv2 жыл бұрын
Your ink pipe is not put properly
@shelissascraftsandengraving Жыл бұрын
9 pm cst If the printer prints no ink what can cause this? I replace the printhead and print head connectors still no ink at all
@dtgdtfdiy Жыл бұрын
Which printer model? Please check if ink is coming out from waste ink pipe. If capping unit is clogged , it may cause this issue. You can connect with me @ +919699998080
@InfiniteHours3 жыл бұрын
Very useful video 👌🏻
@dtgdtfdiy3 жыл бұрын
Thank you 🙏🏻
@InfiniteHours3 жыл бұрын
@@dtgdtfdiy I like to know is ICC profile important/required?
@dtgdtfdiy3 жыл бұрын
@@InfiniteHours sometimes yes, sometimes no.
@graphx88 Жыл бұрын
Should I keep on press head cleaning everyday before I start printing?
@dtgdtfdiy Жыл бұрын
It’s always better to keep head clean before u begin with print.
@anilreddy01023 жыл бұрын
I heard white ink circulation system has issues like color mixing. Is White ink stirrer system better?
@dtgdtfdiy3 жыл бұрын
I dont prefe using white ink circulation systems. Today or tomorrow it will create issues. Even vacuums .
@anilreddy01023 жыл бұрын
@@dtgdtfdiy What about white ink stirrer system?
@Kannan_The_Navigator3 жыл бұрын
Useful and thanks
@dtgdtfdiy3 жыл бұрын
Thank you
@kaisarimammehedi8336 Жыл бұрын
how many a4 sheets can print epson L805?
@dtgdtfdiy Жыл бұрын
Sir, we do not use 805 printer for DTF. So no idea or we cant answer your question with confidence.
@kaisarimammehedi8336 Жыл бұрын
@@dtgdtfdiy I watched the videos on your channel about L805. So i asked that.
@dtgdtfdiy Жыл бұрын
Yes Actually we did it to test software on L805. People use it for sublimation lanyard roll printing. I would recommend not to go with 805 but
@kaisarimammehedi8336 Жыл бұрын
@@dtgdtfdiy I'm using l805 from last december. It takes 3 min± for A4 printing. But, L1800 takes so much time.
@dtgdtfdiy Жыл бұрын
Thats good
@reginahardaway74542 жыл бұрын
where can you purchase the metal dampers from?
@dtgdtfdiy Жыл бұрын
Plz call us @ +91 9699998080 if you are from India. or you can whatsapp us . Thank you and sorry for delayed response.
@monterbox63942 жыл бұрын
L805 Cleaning after disassembling the head I put it back together and tried to print it out, but it came out as white paper. What should I do?
@dtgdtfdiy2 жыл бұрын
Check head cable Do ink charge once ( initial ink charge )
@princy36012 жыл бұрын
hello sir i just bought dtf printer l805 but my print is watery after print come all color drop . ont dry . i print both side of pet film but still same result i really dont know what happen and how to fix it please help me
@dtgdtfdiy2 жыл бұрын
Plz get in touch with 9699998080 Share a video on whatsapp
@benaissamhamed7192 жыл бұрын
Hello, regarding the DTF what is the difference between an Epson L1800 and the Epson L 805 apart from the big price difference? , thank you for all you do
@dtgdtfdiy2 жыл бұрын
Print size A3 vs A4
@benaissamhamed7192 жыл бұрын
@@dtgdtfdiy thank you for everything
@ginafraicola5133 жыл бұрын
Hello sir. My ink is not charging to my new baffles. It sounds like it is charging but ink will not travel to baffles. I pulled ink through the lines and they are not clogged. I am wondering if there is something wrong with the pump. Any thoughts please? Thank you !
@dtgdtfdiy3 жыл бұрын
Capping station is faulty then. Check with local engineer. Also check waste ink path is not clogged
@brokenangel73692 жыл бұрын
Can we use glass cleaner to clean head ?
@dtgdtfdiy2 жыл бұрын
No you should not.
@boldbespoke2 жыл бұрын
Which solution we can use instead?
@dtgdtfdiy2 жыл бұрын
@@boldbespoke you can use speciality inkjet soft or hard solution. Have a word with your vendor
@marukob94653 жыл бұрын
what you do if there is lines while printing?
@dtgdtfdiy3 жыл бұрын
Reasons can be clogged head or dust around head cap.
@MAJID55083 жыл бұрын
Boht zabar10. Mera head block ho gaya hy. Main nay es video sey pehly esa manuale clean kia ta per kuch acha result nahi mela. Kya karon naya head haridlo?
@dtgdtfdiy3 жыл бұрын
Sir head clogged hai to chances hote hai iss tareekese nikal sakte ho. If it is blockedthen its difficult. Outer layer lo solution me 2 din rakhke dekhiye. Bohot bar head open ho jata hai 🙏🏻 thank you
@temzzpgn176311 ай бұрын
Sir i have l805 and wanted to convert it into DTF but some experience user warns me about it. Please help.
@dtgdtfdiy11 ай бұрын
We do not convert 805 to DTF sir, Cant suggest or comment as we wont be able to provide support for 805
@aliasgerzakir3 жыл бұрын
How do u remove the white outline on the image?
@dtgdtfdiy3 жыл бұрын
In color settings ( white ) you will find option in the bottom.
@sameerahamad9552 жыл бұрын
Sir humko cleaning solution chaiya for my l800 printer,how can i get it
@dtgdtfdiy2 жыл бұрын
Contact +919699998080
@kunalmiglani5168 Жыл бұрын
Can we convert normal (old) l805 printer into dtf
@dtgdtfdiy Жыл бұрын
I would recommend not to use small DTF A4 printers. 805 already discontinued long back . Better go with any 12 inch printer . Atleast A3
@aj88953 жыл бұрын
Hi there. I was hoping you could assist me with my epson l1800 dtf printer . I would print 1 - 3 prints perfectly fine. Then the l1800 printer would print white which is not solid and faded. If you look closer it will be white lines and not solid making the white print faded. Please do you have a solution?
@dtgdtfdiy3 жыл бұрын
This is mostly head issue. Its not completely open. Also try changing dampers. If you have metal mesh damper plz use it. Ink quality matters a lot.
@Letshavefunstudying2 жыл бұрын
After how many print should we clean it?
@dtgdtfdiy2 жыл бұрын
Depends If u get lines then only u should clean Or if any color variation
@azzkiaman5246 Жыл бұрын
Where did you buy you dtf inks? I want good in dark tshirts pls send me anylinka for inks.
@dtgdtfdiy Жыл бұрын
You can buy it at www.dtgdtf.com if in India
@Printholic-Personalised-Print3 жыл бұрын
White ink circulation cost??
@marukob94653 жыл бұрын
what is the advantge of metal mesh?
@dtgdtfdiy3 жыл бұрын
Ink comes out easiy
@marukob94653 жыл бұрын
how to cinvert to metal mesh there is selling in local stores?
@silasamadi60342 жыл бұрын
Sir I have done head floush and the head is open but after first printing the white ink stop coming out
@dtgdtfdiy2 жыл бұрын
Charge ink again with resetter tool Also make sure waste ink is coming out properly
@herography.mumbai3 жыл бұрын
Good...
@dtgdtfdiy3 жыл бұрын
🙏🏻
@snehajeetsarkar1370 Жыл бұрын
Mera white ink thik se nahi aa raha hai kuch solution hai ??
@dtgdtfdiy Жыл бұрын
Try to Charge inks. You can check video in our playlist
@snehajeetsarkar1370 Жыл бұрын
@@dtgdtfdiy ink flushing is good ??
@dtgdtfdiy Жыл бұрын
@@snehajeetsarkar1370 no. Better do ink Charge
@dtgdtfdiy Жыл бұрын
Not at all. Better charge inks
@shakibmahin10723 жыл бұрын
please sir say about tray size hight
@dtgdtfdiy3 жыл бұрын
Contact on whatsapp plz +919699998080 Height i cant confirm here but size is 14x20
@faviquiz2 жыл бұрын
Can we Re Use this Paper??????
@dtgdtfdiy2 жыл бұрын
No you can not
@faviquiz2 жыл бұрын
@@dtgdtfdiy UV vs DTF which one is better?
@dtgdtfdiy2 жыл бұрын
@@faviquiz both completely different methods. No way to compare. Depends on what application
@faviquiz2 жыл бұрын
@@dtgdtfdiy ❤️ Thanks I am new in Printing www.bcprints.in will update to A3 DTF Soon
@snehajeetsarkar1370 Жыл бұрын
I have L805 DTF printer. If I keep my printer off for 1 week. So what can be a problem? if there is a problem, what is the solution? #PleaseReply
@dtgdtfdiy Жыл бұрын
I would suggest not to get into this business if from the beginning you are thinking of keeping printer ideal for 6 days. Better option you can outsource stickers . Once you are sure with volume of orders u are getting you should start in-house printing.
@decks34662 жыл бұрын
You dont power ink flush,use ink charge.ur wasting ink