Dual mag carrier in the HD Industrial Design jig. The perfect curve everything. Music: Gravity Bass Musician: Nordgroove URL: icons8.com/music
Пікірлер: 81
@krieger418613 жыл бұрын
Thank you, I have learned a lot of new techniques. You’re about the only one that goes from start to finish. Keep it up
@FalTacUnlimitedLLC3 жыл бұрын
Thank you so much
@olechuga2 Жыл бұрын
How much to have a curved three-magazine (7-rd mags) pouch-carrier, to be worn on the right (R) side of my belt, for a Performance Center Smith and Wesson 4" Shield EZ (9mm). Do you carry Vietnam tiger-eyed green kydex? I am also going to order an OWB left handed Level 3 holster in the same color. Oscar
@ronaldpeterson55982 жыл бұрын
How about a Pocket carrier for one, Ruger LC9mm magazine, black, minimalist design, secure pocket clip- so when you grab your mag the carrier stays put. Newbie here, retired and CCW, beginner.
@FalTacUnlimitedLLC2 жыл бұрын
I'd probably rock an ulticlip on a mag carrier. Be a good combo for that
@Balsero-qb9gv2 жыл бұрын
8 have a question please, what's the name of that foam? Any place that I can buy it or order it? Thanks so much!!!
Man, thank you so much for all your videos. I6m just getting started but you have saved me so much time and headache. Thanks again.
@FalTacUnlimitedLLC3 жыл бұрын
Np! Thanks for the support
@juanclark98243 жыл бұрын
Are you excepting laser work. I rather have someone else do it. The cnc machines are an arm and a leg
@FalTacUnlimitedLLC3 жыл бұрын
Ya I accept laser work anytime. What do you need done? Fomis?
@juanclark98243 жыл бұрын
@@FalTacUnlimitedLLC logo for holsters
@FalTacUnlimitedLLC3 жыл бұрын
@@juanclark9824 ya man anytime.
@mattknower8073 Жыл бұрын
Sorry, Remoil?
@FalTacUnlimitedLLC Жыл бұрын
Yup. It's a lubricant. So it not only cleans. But it doesn't allow the sheets to stick together
@larryjones63592 жыл бұрын
Great job learning TONS thanks just started two months ago at age 82, it turned 83 yesterday LMJ
@FalTacUnlimitedLLC2 жыл бұрын
Happy birthday sir!
@phoenixholsters Жыл бұрын
Great work and a great video!
@MrNewtoGuitar3 жыл бұрын
Love your attention to detail and start to finish builds. You’ve totally inspired me to try my own holsters! I’ll definitely be buying one of yours out of total support to your business though. I’ve paid double what your custom holsters cost! Love your channel and content! Hope you succeed In growing your business! I’ve told all my friends about you!
@FalTacUnlimitedLLC3 жыл бұрын
I appreciate your support! Don't forget to send some pics of what you create
@nswfftp3 жыл бұрын
Next build iwb glock 48 with trl6. With clear kydex
@FalTacUnlimitedLLC3 жыл бұрын
clear is very brittle but i have a couple clear builds coming up
@danw71563 жыл бұрын
I love that design...I’m going to make matching holster and mag pouch now. Thanks.
@FalTacUnlimitedLLC3 жыл бұрын
Enjoy!
@MrMgpixels213 жыл бұрын
What’s the secret to drilling a straight hole for retention sometimes my drill runs or not straight on the back side
@FalTacUnlimitedLLC3 жыл бұрын
Drilling plates and experience lol. Try drilling slower
@lof13203 жыл бұрын
🇧🇷👏👏
@samaniegohummer12 жыл бұрын
Thank you 🔥
@mattknower8073 Жыл бұрын
Recoil?
@garrickdelafuente90822 жыл бұрын
Bor u cool
@josephholster96263 жыл бұрын
A que temperatura calientas el Kydex en el horno
@FalTacUnlimitedLLC3 жыл бұрын
360⁰
@stephenreed55223 жыл бұрын
I had a question with your video , Before starting your video, not only your logo the movement and music, how is that done ?? I ask Mr, Just Truck'in but haven't gotten a response, Us it something i can put together on my laptop ?? Appreciate any help, Sir
@FalTacUnlimitedLLC3 жыл бұрын
Believe it or not I use an app on my smart phone called video maker. Which can be made with a laptop as well
@stephenreed55223 жыл бұрын
@@FalTacUnlimitedLLC .. Thank you 😊 Sir.
@ronroth60223 жыл бұрын
Seriously inspiring. I’d love to see a iwb light bearing taco or sidecar. Glock tlr1/7a or a Sig 365 tlr-6. I remember the one that was titled a iwb light bearing ended up being a owb 🤙🏽
@FalTacUnlimitedLLC3 жыл бұрын
Definitely will do that when I can!
@ronroth60223 жыл бұрын
Outstanding. Keep the content comin bruh
@countersniper4323 жыл бұрын
Just had my wife order me a holster for Christmas lol. Can't wait, although I'm sure with lead times it might not be here by then but that's cool with me.
@FalTacUnlimitedLLC3 жыл бұрын
Whats the name on the order
@countersniper4323 жыл бұрын
@@FalTacUnlimitedLLC Barton - just submitted this morning
@brianbrinegar60863 жыл бұрын
Excellent work! Can you make a video for a competition holster with an optics cut out? Cheers!
@FalTacUnlimitedLLC3 жыл бұрын
Absolutely. The next one i do I'll film! Also see you soon!
@brianbrinegar60863 жыл бұрын
@@FalTacUnlimitedLLC Let me look in the safe - I'll pick one out to order!
@mrbreihan3 жыл бұрын
Great work! Can you show how you block out a 1911 for an OWB holster. Just curious how the blocking looks with all the controls.. Thanks!
@FalTacUnlimitedLLC3 жыл бұрын
Pretty simple. The right side needs a channel to the take down pin. The left side doesn't need anything passed the safety. The slide catch is so low from the factory that the grip creates the channel. Personally I cut wood or scrap metal (if the mold isn't already blocked for it) to go over the safety. Or you cut the swestshield just before the safety and don't have to worry about blocking that side at all
@mrbreihan3 жыл бұрын
@@FalTacUnlimitedLLC Awesome. Thanks. What thickness of kydex to you mainly use for your holsters?
@FalTacUnlimitedLLC3 жыл бұрын
@@mrbreihan .08
@Think_4_yourself_plz3 жыл бұрын
I'd love to see an M&P Shield with a TLR-6 light and suppressor sights, with mag holster attached as an IWB appendix carry holster. Two color if possible. I'm looking into to making these, and your videos have shown me a lot. Thanks for tutorials. 👍🇺🇸👍
@matthewweaver7073 Жыл бұрын
What thickness kydex do you use
@FalTacUnlimitedLLC Жыл бұрын
.08
@anesproductions64083 жыл бұрын
As always, your videos are badass and educational for someone like ne who id just starting out. If you don't mind my asking, what material do you use for your retention spacers?
@chopperjohnparamedic22193 жыл бұрын
I would love an EDC tray.
@FalTacUnlimitedLLC3 жыл бұрын
Available on the site. Faltacunlimitedllc.com
@dustincopeland6123 жыл бұрын
Where do I go to order a holster and a double mag holster to go with a colt all American model 2000?
@xdivineHART2 жыл бұрын
What kind of foam are those?
@FalTacUnlimitedLLC2 жыл бұрын
Beige from from holstersmith.
@LeeBoone0012 жыл бұрын
What tool did you use that contoured to the mags to give you your straightedge at the top? Not sure I described that very well.
@FalTacUnlimitedLLC2 жыл бұрын
It's a contour gauge
@lowdragtactical47422 жыл бұрын
Any suggestions on what brand or where to get one.
@FalTacUnlimitedLLC2 жыл бұрын
@@lowdragtactical4742 home depot!
@davissantiago51773 жыл бұрын
I agree with Jeff Williams, keep up the great job, what do you suggest if you don't have curved jig? I appreciate your feedback?
@FalTacUnlimitedLLC3 жыл бұрын
I used to curved them by hand. Really not hard at all. Just do the retention holes last
@davissantiago51773 жыл бұрын
@@FalTacUnlimitedLLC thank you, was thinking about that, thanks for the feedback and "keep bending"or happy bending as you always say