Dual WAN Configuration on RV0xx Series Routers

[@BillyBufter]

I have a question when running in conjunction with SG200 switches. I have RV042G router and want to be able to use 2 VLANS to separate company departments but I noticed there was only one DHCP pool, which limits this to one VLAN. How can 2 vlans be managed and to use WAN as backup. Thanks

[@Wikusdup]

Hey, i'm confused about the protocol link. If I link KZbin (for example) to Wan 2. Will that effectively mean that: *ALL traffic is load-balanced until I search for KZbin, in which case only Wan 2 will be utilized for the KZbin streaming?

[@deepakbong]

Could you suggest a small business router which has two wan port and support built in wireless as well ??

[@mikeswenson978]

Hello, The RV340W support dual WAN ports and is wireless. www.cisco.com/c/en/us/products/collateral/routers/small-business-rv-series-routers/datasheet-c78-739257.html

[@AdityaYadav-yj2sv]

Hi Cisco, I have a question about dual WAN ports . If we connect 4Mbps Lease line to primary WAN and 6Mbps broadband link to secondary that means we are giving total input of 10Mbps and configuring router to Load Balancing(Auto Mode), will router give output of 10Mbps or it will give average i.e 5Mbps. I want this router to handle 40 users. Please let me know is it appropriate router to use with 4Mbps lease line and 6Mbps broadband at a same time for 40 users.

[@CiscoSystems]

The RV series does Load Balancing in a Weighted Round-Robin packet transfer method. In this method it prioritizes packets transmission for bandwidth optimization creating faster throughput. In the scenario you described the assumption would be that it combines the total throughput and divides equally, which isn’t the case. -Cheri

[@Chandrasekarize]

Sir I have one doubt is the normal TP Link AC series or HP 941 will support leased line?

[@ricardosepulveda4938]

I have this scenario: My cisco RV042G is inside on corporative network and the "Internet Port" has a private IP (not public from ISP), so, I have a little problem. All clients that is connected on this router can't get out to the internet. It is possible this scenario? Or I have to create firewall rules to do that?

[@Redyear20]

Greetings, your private network is on a vlan?

[@ricardosepulveda4938]

No, no one is inside on a vlan.

[@mikeswenson978]

Hello, 1. Ensure that your private IP subnet is unique ( example: If 192.168.1.1/24 is on your RV042, that same subnet cannot exist anywhere else on the network. 2. Becasue your RV042 is not the internet gateway, tThe true internet gateway router would need a route for your private network. Also, you can check the default gateway on the host (computer).

[@patiurco]

Hi Cisco, What can I do if I want to set any Destiantion IP. Is it possible??

[@harrybrar5689]

0.0.0.0 means any

[@olivercausing228]

Hi you post was very helpful but i have a list of questions. 1. i am located in philippines and it is to expensive to have a static internet connection in my house. so instead of using static i am using a dynamic isp connection it is possible i use 2 dynamic using a 2 wan routers ? 2. just compose about the option in dual wan load balance if i set my 2 connection to LOAD BALANCE (AUTO) i cannot use the smart link back up? 3. for the protocol i want to set my incoming and outgoing emails to sent and receive by the wan 1 and the wan to use for browsing how i can do it? i am a beginner in networking sorry. thanks alot

[@ciscosmallbiz202]

Hello, I suggest that you ask these questions in the Small Business Support Community located here: supportforums.cisco.com/community/5951/small-business-routers. Regards, Cindy Cisco Small Business

[@a.octaviosanchezochoa8277]

Thanks man!

[@1991emilianogarcia]

Hola soy nuevo en esto y'quería saber que ip tengo que colocar en donde dice: ISP HOST Y REMOTE HOST. Saludos

[@MadhuSudhan-cn5sn]

Dear friend, We can do smart balance if WAN1 failed auto WAN2 the same concept can we do in VPN connection. If WAN1 failed entire VPN gone untill WAN 1 up. Is there any options or new firmware patch. If anyone know please please please revert on this..

[@discobook6159]

Hello there, I recently purchased a second hand RV 082- Router. I’ve downloaded the latest firmware/ software, as of today is June 2015- First I am unable to open the browser to upload to update the firmware ? is updating the software a primary necessity or could I update firmware at a later date. Second I’d like to set up the second router RV082 as a VPN firewall. for the RV082 is always necessary to plug or have two ISP one for the DMZ internet and internet Any assistance at your end would be very helpful.

[@CiscoSystems]

+Disco Book While it is always recommended to update the router’s firmware to its latest version, being unable to do so shouldn’t impact the performance of the device. However, it’s a good idea to update at some point in the future, preferably sooner rather than later. You shouldn’t need multiple ISPs in order to get the DMZ function to work; however, depending on your setup, you may need multiple IP addresses to be given to you by your current ISP. ~Cheri

[@alialasadi7191]

hi it dose support CLI interface ?

[@admnaidu7040]

Hi Team, I have a cisco rv042 router in office i want to block vedio from LinkedIn, LinkedIn site should open,... only vedio from LinkedIn should not open in office network help me. out @ Thank you in advance

[@CiscoSystems]

Unfortunately RV042 can only block sites, not certain content of the said sites. Please contact our support team for a workaround: www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html

[@SimonChengHK]

Thanks for sharing ^_^

[@shubhamnautiyal6952]

Any one support me configureation cisco dual wan port router.

[@CiscoSystems]

Hi Shubham. We have a very active Cisco Communities forum where you can post this question, and we have many experts there that can help assist. Here is the link to that forum: supportforums.cisco.com/. Please reference this video in your query.

[@shubhamnautiyal6952]

Cisco 7455931527 this is my contact number can you call me any tym and you can do whts on this number.please support me urgently .

[@jaimeduncan6167]

It's not bad, but what this reviewed by a teacher? What about professional production. The tutorials should be oriented to "what the client wants to achieve". TI professionals (like myself) can read the manuals for the proper jargon. So you start for some scenarios, you describe the names as you advance and the video is produced by some guy that do video. Just my feedback to improve. As I say it's not bad but a lot has to be done. IBM use to have this kind of videos, even the marketing ones. If they move up you can too :)

[@ciscosmallbiz202]

Thank you for the suggestions. I will forward this on to our production team. Regards, Cindy Cisco Small Business

[@centrosdecontrol]

V