Dualtron Wheel Removal

[@beauschneider6848]

Thanks for this video. You helped me fix my Thunder. Back to riding.

[@turbofan67]

It looks like you can leave the left side wheel nut ,brake caliper and bracket alone. Just remove the right side swingarm, and remove the rim from the hub.

[@Nrv29]

Merci. Enfin j'avais rien trouvé sur le youtube FR

[@bojna1]

For me the wheel screws didn’t come off so easily. I had to heat up each screw for two minutes with a micro torch.

[@drealnapster6320]

Have you guys stopped using the thread lock on the rim bolts to the motor ? ? Seen so many threads and posts of people snapping the bolts

[@kbrogers55]

This video is a gross misrepresentation of the actual wheel removal. The threadlocker applied to the rim bolts is unnecessary and extends the hours spent on this process 3x (unless you happen to get very lucky). If you guys want to actually help people, spend time telling them the harsh truth and maybe solutions to alleviate the actual issues.

[@TheDocHelios]

Exactly… I’m struggling so bad with this tire right now. The video is a joke. Everything is loctite and nothing removes like in this video.

[@bubmaik]

Finally! Awesome Dualtron guides.

[@floydb9100]

Hey John! was wondering if you have a vid on how to change rear disc ? some vids on KZbin show with soldering rod but I read you don't need to. It would be great not to with soldering iron, Thanks, have a great day

[@Mannn453]

please Could you make a video of how to change the brake disc in a quick and easy way? and another disc on how to install a headlight, turn signals with a dultron motorcycle switch in an easy and fast way? thanks

[@ElectricScooterMan]

Not sure why I was told this scooter isn’t split rim. This is what I love.

[@rxonmymind8362]

The Eagle is a PIA to change the rear tire. How does one get to the rear bracket nuts?

[@raykeogh1972]

Hi John you make that look so easy. I have watched a lot of video's on how to do this and none of them look easy in fact they all look scary and put me off trying, Velocitygt from Oz said if you dont heat the back of each screw the head will just snap off, do you have any advice for this ? watching you here you have them already loose for speed and ease for the video, Ray K UK YNWA.

[@darbiecorsino5886]

May I ask what is the brand of the rachet wrench/allen tool set you are using?

[@michaelbesler7469]

Thanks for the video, if it’s just a matter of taking the wheel off to change a tire then that is waaaay too much work. Just remove the arm off the none brake side and rear fender screws(2) and then remove the Alan screw that hold the wheel to the motor and that’s it. Much easier. In my opinion. But thank you for the video John.

[@eastcoastlife3547]

You probably can’t reach the nuts for the fender with the tire on… But that is the way to go taking the arm off problem is those fender nuts

[@michaelbesler7469]

@@eastcoastlife3547 it’s nut easy but it can be done, I know .

[@Bougie-N-Broke]

Yes you can​@@eastcoastlife3547

[@ezgetap677]

No locktite?no original brake pads? small bolts on fender?

[@cyco1978]

Are there any different tires for the 3 like off road

[@BELLOCCHIVERDE]

Great video anybody who’s decent with their hands could’ve figured this out my only million dollar question is why does the video get cut off at exactly the one or if I may see the #1.. spot,, removing the screws which strip even applying the heating gun now things just got extremely extremely complicated

[@Bougie-N-Broke]

He took a whole bunch of unnecessary shiz off... the only thing on the left you gotta do is the fender... the fender will get in the way

[@vinh-thuy7033]

Thanks for this video 👍. Please post more tuto

[@mrmovin12345]

Why is the deck off is there a step that goes b4 just taking the caliper off?!!

[@mrmovin12345]

What happened to your spring that goes on the wheel on the braking side??!!!!!!!!????????!!!!!!

[@burtonbufford]

Any advice or videos on changing the tires for the Dualtron Raptor 2? I ordered tires months ago but can't find any videos nor is e-scooter mechanics a thing in Ohio. Bike shops won't touch them for liability reasons. I'm pretty sure I'm due for a tire change (among other things.( I've put like 1611 miles on my scooter. Anything would help at this point.

[@Guille8888]

question, the Thunder´s and the DT3´s rim are the same size???

[@Truebillycat]

Why is no one from mini motors replying to the lock tight questions but responding to all other comments . Did you stop using lock tight or not? Thats a big difference of taking that motor out with or without it. Its clearly without locktite in this video , but what about the 50 people that broke the heads off the bolts. Whats the answer minimotors?

[@kernalmusterd]

i just tested if i could remove these bolts as easy on my eagle pro. they seem to be glued in so i will have to invest in a blow torch to soften the lock tight

[@edgaraspavarde7233]

Hi, maybe you know ultra2 rims possible instal on dualtron thunder?? Please aswer

[@rbuckbuckle2513]

Should I get some kind of torque wrench for getting tight around the motor

[@csabas46]

How sturdy is the tyre? How often do you get a tyre puncture?

[@MeltdownDJ]

This also working on raptor v2 and new dualtron 1.5 ?

[@jerwynnnovejas6037]

Good day, hope video on dualtron city please, more power to your channel. Thanks

[@rcmafia2]

Why do they put the fender bolts inside ? it's fucken stupid. It was so hard You didn't even show it on your video

[@Davido1312]

Exatcly what i thought outside would be 100x easyer

[@TheDocHelios]

How did you remove them? I can’t get the wheel off or reach the bolts

[@xorbe2]

My Thunder axle bolts were put on by godzilla, I was bouncing on a breaker bar to get them loose. I thought I was going to have to bust out the 1200 ft-lb air torque gun. Taking off the tire just so I can secure the fender, seems like the bolts are just falling out.

[@UninvitedGuestSpeaker]

Incomplete video?

[@rasleeaj3400]

a small part got cut off when removing small bolts, could you re show it?

[@alejandrozuniga7127]

You send to Brasil???

[@Bougie-N-Broke]

Why the hell did i remove ANYTHING from the left (drivers) side? WTF BRO?

[@sendylovecandy]

how much

[@edwinchorimbo8224]

Hello guys.....when it's available the Dualtron X ?

[@MiniMotorsUSA]

We are thinking March - April

[@alinehme9425]

How the hell do you remove the disc or rotor

[@nickmurphy5632]

detaching the motor phase wires from the controller inside the deck, then pulling that wire free of the body so that one can slide the rotor disc off over the phase wires themselves

[@alinehme9425]

Nick Murphy hey bud sorry for the late response. I struggled with the rotor a lot first one i ordered was the wrong one and mini motors never responded to any of my emails and for the electric motor wire I just heated the the gold tips that plug in with my solder gun and solder them back on. It’s up n running now but it’s already snowed twice in Michigan 😢. Thanks the reply my brother may the good lord bless the woman that carried you in her stomach.

[@JarppaGuru]

ultra v2 not ultra2 only need remove side where hub skrews are and rear bumber why need open other side and remove breaks i not get it? and no heating THX GOD!

[@crabkilla]

Post more please!!!

[@mattlocascio4949]

so i can go to fastenall for many of these components

[@xorbe2]

Dualtron should get some kind of award for the worst design ever here. It's infuriating to disassemble and reassemble.

[@stanc521212]

Hi John more video please

[@MiniMotorsUSA]

Let us know if you have anything specific in mind, but we will be coming out with more content here in the near future. Thanks!

[@stanc521212]

@@MiniMotorsUSA For example like how to change the cartridge rubble for the suspension system or some explanation of the 9 step variable suspension system, on the website is kinda confusing. Thanks in advance!!!

[@InegoMinblan]

@@MiniMotorsUSA Do a comparison Dualtron3 vs Speedway5.

[@jorgin5647]

MiniMotors USA change the brake disc?? Thanks

[@KevinRedmondWA]

Make a video of swapping the front brake rotors, I dare you. That’s right, I just did it on my ultra 2, and I wouldn’t wish it on my worst of enemies. Who designs a power cable that routes through the rotor, side arms, and stem!? To swap the front rotor is more difficult than giving birth. I ended up cutting the wire and putting in a barrel connector instead, so future rotor swaps are easier. Lastly, cut it out with the lock tites. You don’t need it. Other videos say use a heat gun to remove some of the bolts, ya my ass. Try use a butane torch instead, whatever the lock tite used is probably made out of the blood of hulk, no heat gun will remove those bolts. Use a butane torch. Edit: oh for everyone out there. If you are working on the back wheel, might as well take the time to trim the rear fenders so it doesn’t rattle.

[@firestone9755]

I've had it rattle on the achilleus I got recently, just shy of 440 miles Turns out the screws came loose, and they're annoying to access and tighten

[@davedeluria]

Those fender bolts are a bitch and a half to remove

[@ibrahimyahaya2995]

Hi

[@user-Kostantinos]

А шо? Так можно было😂

[@ТолибджонРозиков-р8э]

Я хачу вашу фирма купит электросамокат дултрон тандре