Ducati Panigale V4 | Fullsix CArbon Fiber Heat Shield Install

[@BPxGarage]

Great Video!! This helped me out so much brother. I am in the process of my build and dealing with this save exhaust cover and the left engine cover. I really didnt want to remove the rear subframe, but this made it look a little simpler than i thought it would be. Plus you reused the same subframe bolts which i wasn't sure of either. This video just helped me so much.

[@MotoGarageTV]

Thank you, I'm glad it helped. I've got a few more videos coming. I hope your project goes well. Take care

[@mylifeinnewyork5625]

perfect instructions on that install! It took me literally 4hr to install that one piece of carbon but the look afterwards was well worth it!

[@MotoGarageTV]

Right on! Yeah, taking the OEM one out was a battle. After taking the rear subframe off, it made things a whole lot easier.

[@j0akim123]

What a nightmare installation... Couldn't stop watching though. Like a horror movie. So basically we need a roof lift and some more "stuff" to be able to change it.. :)

[@MotoGarageTV]

LOL..... and a lot of patience.

[@Vicdavies151]

Pro tip from a non pro ,maybe a smearing of grease on the fibre washers to hold them in place ??

[@MotoGarageTV]

That would work. Thanks

[@JasminSinanovic-w9o]

Hello, what are the specs for torquing the bolts back for the pegs and for the seat frame??? And i got mine peace 2 weeks ago anddd the 2 bolts that are giving me problems those ones that you mentioned, there is no much space to take them off.

[@MotoGarageTV]

Hello, sorry which bolts are you referring to?

[@JasminSinanovic-w9o]

Subframe and rearsets, they have torque specs correct? I was wondering if you found out the specs?

[@MotoGarageTV]

@Jasmin Sinanovic Hey, sorry for not getting back to you. I was able to come across a torque sheet for just about all the common stuff on the bike, including the info you are asking about. I can send you the PDF if you send me your email. I'll try and attach it down below in the description area on this video on the meantime

[@MotoGarageTV]

​@@JasminSinanovic-w9o Sub-frame to front frame fasteners 31.0nm* Replace whenever removed/re-fitted Sub-frame to rear cylinder head fasteners 35.0nm* Replace whenever removed/re-fitted - LH footrest to swing arm support fasteners 2 M8 25.0* GREASE B Gear change arm pinch bolt 1 M6 10.0 - DQS unit to gear change rod 1 M8 15.0 LOCK 1 DQS to gear change arm fastener 1 M6 10.0 Pre-applied threadlock DQS to gear change pedal 1 M6 10.0 LOCK 1 LH heel guard fasteners 2 M5 6.0 LOCK 2 RH footrest to swing arm support fasteners 2 M8 25.0* GREASE B Gear change lever pivot bolt 1 M8 25.0* GREASE D RH heel guard fasteners 2 M5 6.0 LOCK 2

[@JasminSinanovic-w9o]

Thank you sir for taking your time to write me the information.

[@SUPERFLUID88]

Fullsix carbon fibre has a lot of quality issues according to my personal experience I purchased 2 carbon fibre winglets for my Streetfighter and holly cow the mounting brackets looked like a 6 year old made it and the winglets had chunks missed from it lol What really pissed me off about this ordeal is I had Ducati contact them with pictures Their reply was “THIS IS ACCEPTABLE QUALITY ACCORDING TO FULLSIX STANDARDS “ lol are you kidding me? It’s absolutely garbage!

[@MotoGarageTV]

Hopefully you bought them from a trusted business and they refunded your money, and not off ebay or some fake website claiming to be fullsix. I've had zero issues what so ever. My winglets however are not fullsix, the are from V4evo.com

[@christopherjohnson6056]

Sorry to much chat , we all know how to push grommets out lol 😅

[@MotoGarageTV]

Lol... you'd be surprised.... but noted, I appreciate the feedback as I continue making these videos. Have a great day. 👍

[@David-bf6pl]

I don't.

[@pronotoadicoro8041]

mostly chat, immediately replace not talking much

[@MotoGarageTV]

?