Ducati StreetFighter S Stock Exhaust vs Termi Slip-ons, and Austin Racing GP2

The wait was worth it. Thanks to Rich at AustinRacing
Check them out right here.
www.AustinRacing.info
I haven't seen an aftermarket exhaust that slips right on to the OEM pipes without some kind of fitment issues. AR Exhaust fits like a glove.

[@mooiboyace]

What a beautiful Streetfighter ! Love the clear clutch cover

[@elitevrtours3055]

I want. I had termi. I want AR NOW

[@JLXPRO]

Was the DB killer installed in the AR for the video ?

[@Eric-xb4zm]

It’s hard to be sure from the video but it sounds like the AR is about the same db level as the termis, am I way off on that? Also, you had the db killers removed on both exhausts right? Sick bikes btw

[@Inonvu]

Sounds so sick!!!!!

[@donger84]

Ryan Ching Thank you sir. The quality is top-notch, fits like it was oem piping, but it's made of Titanium.

[@Inonvu]

I enquired when they were doing prototypes. Was on the waiting list. Took it off when they were almost done. Wish I didn't. I have questions if you have the time and willingness to answer them. Thanks.

[@donger84]

Feel free to ask. I'm just a happy consumer.

[@Inonvu]

Ok first, if you dont mind, what was the total cost to get it shipped to you and how long did it take? Secondly, does it come with its own ECU? Sorry I have a ton of questions. I would like to tackle this on my own but if it is too hard I may have to take it to the shop.

[@donger84]

Total cost the can and the titanium link pipe to US is $1600, no ECU--I reflashed mine with the dyno which I will post later. Installation is a breeze. I removed the exhaust servo altogether as well. When the dealer remapped/tuned my bike, the clear the Check Engine Light from the Dash.

[@lucvanderham2909]

Sweet. How would you get the deep guttural noise for a kawaski z750s 2006? Is it the shorter the can, the deeper the noise?

[@donger84]

No idea..you meant the canless sounds? I was just messing around to see the difference btwn stock/termi/no cans/and the AR

[@mooiboyace]

Buying a Ducati would work lol

[@jeremytan559]

which better on performance?? Termi or AR GP2??

[@donger84]

+Jeremy Tan Weight-wise, the AR is much lighter (1 short can and titanium link pipe vs stainless steel and 2 pipes of termi) There is a video of a 1098 SF full Termi dyno'ed at 149hp, 87 ft-lbs torque. My AR ran 150hp, but with only 83 ft-lbs torque. Possibly could be more if I used microtec ECU later down the line. I like the AR more due to it clears up the rear wheel. Hope this helps

[@donger84]

+Jeremy Tan I did upload the dyno vid

[@jeremytan559]

Termi 2-1-2 pipe??

[@donger84]

+Jeremy Tan OEM pipe, but I took the exhaust servo out

[@jeremytan559]

Alright then, thanks for your info dude, when I have the money..I'm planning to buy SF 1098, so it's better to know it first..thx

[@xxaltered7xx]

Wher you wannango wout db killer? The Austin Is un uncettable, impossibile to make a trip..

[@donger84]

Where I live, law enforcement doesn't care about loud pipes. As long as you don't do stupid squid shits.

[@donger84]

For dyno video click link below kzbin.info/www/bejne/qaGvf419rsp1f8U