Dump Truck Front Wheel King Pin Bush and Bearing Replacement || Semi Truck King Pin Replacement

[@billietyree6139]

These men are some really impressive mechanics, making do with what they have and doing good work. I especially like their L shaped breaker bar/socket handles, the four sides on each end are tapered to engage the socket but also to allow some function as a universal joint. If I were still working on vehicles I would make some like them for my own use. I do wish that someone would warn them about the possible carcinogenic effects of handling gasoline barehanded though.

[@FrankieD92]

Billie, notwithstanding the great mechanical ability, I said to myself, I hope they are not using gasoline to clean the parts ( knowing well they were.) Many years ago, had a friend who used gasoline to clean cemetery monuments, died of cancer age 38…

[@joelmarfel9425]

@@FrankieD92 I guess they are using Gasoline. Yes the high Lead content of gasoline is not good to their health. I wonder what is the alternative.

[@mikespain8655]

A parts washer. However, when you are working in the dirt a parts washer is a luxury.

[@brasshound4442]

So many people assuming everyone has access to tools and clean areas to work in, you are all spoiled and evil for degrading the hard work of these men. Some people just want to feed their families and make an honest living and should be praised for it.

[@keishamloken641]

Ttyl

[@tonypike5785]

Yes you are right

[@al-ayoungentstailorfasalia651]

ماشاءاللہ بہت خوب جناب۔۔ بڑی محنت کا کام ہے اللّٰہ تعالیٰ آپ سب کو سلامت رکھے اور رزق حلال دے اور برکت دے

[@johnnyfigueroa4690]

Awesome work! Makes me appreciate my tools more and also not to be wasteful of product, materials etc.

[@CCCR-user]

Почитал комментарии, песок, тряпки и т.д. и т.п. И хочу задать вопрос поколению Тик-Токеров, А вы давно вручную перебирали двигатель ? Или мост с коробкой ? Они не от хорошей жизни это делают, но они знают своё дело и могут.

[@ИванКривозубов-в6л]

В Ютубе есть видео где они в таких условиях шатуны отливают сами

[@КонрадКарлович-й2щ]

@Samir Mamedzade 😂

[@47nickname]

Interesting video. It’s good to see the young boys work.

[@personalfunfest]

to the westerners who don't understand. These are not poor peasants. They are professionals commercial truck mechanics... they have access to more tools than anything in your garage. Use of hand tools is customary because it's quicker... especially when you've done the job a thousand times and know what tools it takes... these are Hino trucks using the same bolt heads over decades of models. The kids aren't child labor they are aprentecing...aka learning. While westerners learn about the War of 1812 and how to be college debt-slaves these kids are learning a real trade. And lastly the clothes they are wearing are work clothes! .. not their everyday clothes...

[@hellcat1962]

I do appreciate them using the tools they have but to claim that they are faster than power tools- I just do not agree. An electric impact would have removed those nuts and bolts in a tenth of the time they spend getting them off. Also, I do not understand why they don’t use work tables to save their backs.

[@peterresetz1960]

I see that when they tighten the nuts and bolts they use the German torquing method of Gootintight.

[@careditor]

Ok we get it! Ha

[@野々上昌利-r7y]

Песок подшипник, все супер!

[@cecilwilson5442]

Young people learn and grow up have a trade and keep the transport system running,, here in Belfast,, watching with admiration our work place we would be sent home for so many health and safety infringements 😜😜😜😜😜☘️☘️☘️

[@user-yralez]

Молодцы Индусы, хорошо и слажанно и правильно работают.

[@КонрадКарлович-й2щ]

Ваааапще то Пакистан это.и религия у них в большинстве ислам.

[@papabits5721]

Why work in the dirt all the time? Would drive me nuts

[@Tokinjoe06]

Geez just imagine how efficient these guys would be with air tools.

[@theteadrinker-143]

Great job

[@grumpystruckshop3807]

This is crap, anyone who knows anything knows that those bushes need to be reamed with a piloted reamer to keep exact bush alignment. The dirt must take up the slack in everything!!

[@Barnekkid]

Excellent.

[@ZahidKhan-tj8ty]

Good job.

[@blazeykk]

Bearing Replacement??? Which one? When? 7:22 it seems that using hammer in proper way is too difficult... 9:17 i think he hammered bushings too deep and left no space for sealings.

[@AmazingThingsOfficial]

Thanks for your feedback please watch video from 10:20

[@piotrpartacz8622]

Good work i was doing that last time in man f90 very hard work not easy

[@johncholmes643]

The kingpin bearing.

[@willikiefer7892]

hello you are so craet...send your kids to scool and they went to the best mechanics of the world ...go ahead..

[@OpalUr]

why does everyone work on the ground?

[@jackdaniels9401]

Cuz they belong to planet earth...👽

[@jonasrodrigues3454]

Good 👍😃

[@galesd1971]

It seems that they are fixing whats has been already fixed tens of times

[@Rockyinlp]

Goes to show how "other parts" of the world do it. I love the old school hammer the fuck out of the wrench to make it tight method.

[@silentboy8080]

Песочек,стружка от камня очень хорошо влияет на втулки, действует как смазка... Ха.

[@Mezhidov]

Это тебя в сервисе к такому приучили, а на самом деле всё это херня, а механизмы работают отлично.

[@АлександрИванов-ю8т3ж]

@@Mezhidov да ты че. А нахер тогда пыльники на "гранатах" менять? И так будут работать. С песком и водой

[@БезжалостныйПравдоруб]

@@Mezhidov Нет брат,ты не прав, любая пылинка как образив.

[@ГрантБабаджанян-з1м]

Ну может вукороченном режиме снимают атак хорошо промывают

[@ФедорКазимиров]

Пока одни ступицу собирают, другой балку моста сваркой отрезал!😀

[@5barkerstreet]

why do you work in the dirt?

[@scottvincent7666]

Being poor doesn’t mean you have to wallow bearing surfaces around on the ground.

[@sherylbeasley4938]

Kaiser no ream split king pin kits are so much easier,they use a spiral twist in bushings.

[@ธงชัยทีปกากร]

ทำงานหนักอึดมากแดดร้อน.เยี่ยม

[@johncholmes643]

I see they greased everything just like always.... none.

[@ДенисСеверинов-э6м]

Я не понял, а зачем они кулаки возили в другое место, на месте не могли выбить втулки? Я думал точить их будет на станке... А они готовые

[@Дмитрий.Ку-х9л]

Тоже задался этим вопросом)

[@JayLang7]

I don’t asphalt has made it to this country yet.

[@fursa6178]

Индия?

[@КонрадКарлович-й2щ]

Пакистан

[@Mezhidov]

Им бы пневматический инструмент, производительность возросла бы.

[@alextrofimov6208]

Нельзя им. Иначе куда всех остальных девать? А так все при деле. А вот ручной пресс им бы не помешал. Что бы детали не уродовать.

[@hugocapurro604]

dion mio armaron las cintas de freno cvon grasa

[@БезжалостныйПравдоруб]

Вроде работают потоком,а всё на коленках,всё в пыли на земле,всё ключами какими попало.

[@Mezhidov]

Раньше в гаражах так же было.

[@БезжалостныйПравдоруб]

@@Mezhidov Я сам работал в автомастерской по иномаркам в Грозном ещё до событий 1994-го.У нас не всё было айс но в пыли не работали,железные верстаки, инструменты в ящиках и на стене все по колибрам.И т.д..

[@smmccoy6943]

being a blond hair blue eye americcan welder would i be welcome.safe . around you guys in pak. ? please let me know in comment or dm . i would like to visit and learn.....

[@AmazingThingsOfficial]

Thanks for watching Please fallow us on Instagram..!

[@johncholmes643]

No you wouldn't. Especially if you can't squat like a gargoyle and hit everything with a hammer.

[@szskills7263]

amazing#szskils

[@planetacnc]

Why do you use this kind of bumper?

[@johncholmes643]

To look gay

[@KOba8841]

В больницах наверное их также оперируют , в грязи и пыли .

[@CCCR-user]

У них не знаю, у нас стерильно умирают .

[@habibhabibi2318]

Unsafe state, all truck weight loaded on a peace of timber, seems not life value for youth over there. all the best

[@alfredormg]

look at 12:46

[@АлександрИванов-ю8т3ж]

Класс. Один ключ использовать как удлинитель другога ключа. Видимо еще никто башку дурную себе не разбивал. В советских кабинетах труда и на производстве висели плакаты," дебилы, так делать нельзя"

[@hugocapurro604]

dios mio k desastre a martillo eso se ace con prensa hidraulica en una mesa linpia no en el arena

[@hendarnovi9108]

Yang dandan rebutan 🤣🤣🤣

[@НиколайД-е7й]

Я так понял,они шкворень старый оставили? А мы все новое ставим, да еще разверткой проходим.А они втулки поменяли,и развертка не нужна.

[@Karspa247]

child labour everywhere.. anything goes. Chaos. but good work

[@Rockyinlp]

In regards to the child labor thing, ya never know if this is during a time when the kid is not in school. I know lots of mom and pop shops where the kids are there when not in school.

[@rakanal6041]

بحصل عربي هنا 👉

[@muratkaymak1545]

👍🏻

[@ЕвгенийБеляковцеа]

Люди высшей касты

[@andreabasso4574]

Wd 40 aiuta a sbloccare

[@ДенисСеверинов-э6м]

Мы моем детали в дизеле, щеткой, они тряпками...

[@санядозор]

Все как и унас спомошью молотка зубила и какойто матери

[@ЕвгенийБеляковцеа]

В синей одежде гуру

[@kevincandelario2158]

Boitcut Pakistan

[@JoopKomkommerShake]

Wat een gepruts weer, die messing bussen zijn alweer kapot door al het geweld.

[@technologymania8553]

For solar system installation and maintenance technical videos.i need your support.🌹

[@alexandreramos4322]

RESPEITEI O PROFISSIONALISMO

[@VasiliCH163]

ну теперь я точно знаю кто миньёнов озвучивал

[@ЕвгенийБеляковцеа]

По машинам

[@Suhoveev1990]

малой палец повредил...

[@benjover5663]

Down and dirty

[@fufkik]

Бомжы 🤦 пресс купите ...,